Ok.. my back left spring is squeaking like a squished mouse. It sounds very bad and i'm thinking my car will fall apart on the highway. Is it REALLY bad to have this? I'm calling some mechanics tomorrow to get quotes on replacing it
Ok.. my back left spring is squeaking like a squished mouse. It sounds very bad and i'm thinking my car will fall apart on the highway. Is it REALLY bad to have this? I'm calling some mechanics tomorrow to get quotes on replacing it
Now:
-1988 Honda Prelude custom
-1988 Honda Accord (to be fixed and sold)
Soon:
-some big 4x4 truck
-91 Acura NSX
http://www.hatetofeelband.com
Reporting a noise of any kind is the hardest thing to give advice for when your not their to hear it yourself. But what could it be?
The first thing I'd suspect would be a bushing somewhere. I had a noise like your talking about. I even got under the car and pushed up on it from underneath to try and zero in on the noise better, that didn't work. It wasn't until I was replacing the struts and springs and I just happended to flop around one of the rear suspension arms. I could plainly hear my sway bar bushings making the noise. I wonder if you spring perches have the rubbber incerts like their surposed to have?
Hmm.. I don't really have the tools needed to jack my car up and get a good look so I'll probably just take it to the shop and see if they can find what's wrong. Its mainly loud creaking when the car goes over a bump (also happens when I push the back end of the car down).
Now:
-1988 Honda Prelude custom
-1988 Honda Accord (to be fixed and sold)
Soon:
-some big 4x4 truck
-91 Acura NSX
http://www.hatetofeelband.com
Might be just a broken spring. I had that before.
Hopefully is not the arm/ball joint.
Is a broken spring easy to see by eye? I took a quick glance in and nothing seemed out of the ordinary
Now:
-1988 Honda Prelude custom
-1988 Honda Accord (to be fixed and sold)
Soon:
-some big 4x4 truck
-91 Acura NSX
http://www.hatetofeelband.com
It's probably broken at the either end. But sometimes quite difficult to see plus the compression is still putting force onto it, hence not moving that much to see the broken part.
investing in a floor jack and jack stands was the best idea ever for me, saved me alot of dough so far. just an idea![]()
good luck with that hopefully the shop doesn't rape you, lol
89 efi conversion
17" katana, lude arms, full 2" exhaust/hollowed cat, Ractive intake, centerforce dual friction, msd coil/wires
Well this is weird... I got up this morning, pushed down on the back of my car, and heard nothing. I had to pick up some stuff from canadian tire so I was out driving for around 30-40 mins and I heard nothing.. When I got home and parked I did notice some very slight creaking but not nearly as bad as I had noticed the other day. Is it safe to leave it this way for around a month or so? I'm still saving for my winter car and it'll take a couple paychecks.
Now:
-1988 Honda Prelude custom
-1988 Honda Accord (to be fixed and sold)
Soon:
-some big 4x4 truck
-91 Acura NSX
http://www.hatetofeelband.com
Just check the ball joints.
I wouldn't worry if it's from the spring or strut assemblies.
Hmmmmm well I'll leave it for now, but I'll keep some cash in the bank in case something comes up.
Now:
-1988 Honda Prelude custom
-1988 Honda Accord (to be fixed and sold)
Soon:
-some big 4x4 truck
-91 Acura NSX
http://www.hatetofeelband.com
my car makes noise like that sometimes. i noticed it after i lowered it and some stuff got moved. it might just be your ball joint. i don't think that the squeak is anything to really worry over.
when i took out my springs one of them was broken way up that the top, and i was told it was nothing to worry about. if the break was like in the middle, that would be something to worry about.
-Grant. I'm just a pirate chasing booty.
GEt lowered springs! (i dunno why i sed that)
Old Pic:
https://www.3geez.com/attachment.php?s=&postid=57333
New Pic ($1200 later....):
http://sanjay.ozimpact.com
Are the fronts suppose to have a rubber insert too for the bottom?Originally posted by Jims 86LXI HB
I could plainly hear my sway bar bushings making the noise. I wonder if you spring perches have the rubbber incerts like their surposed to have?
Because my front is squeaking like mad-
Everytime I go over a speed bump or a dip-Its getting more frequent now.
HELP!!!
I sprayed most of the bushings and still squeaking-
Can a bad strut squeak like that?
The front springs to not have rubber inserts on the bottom spring perch.
Mike
wut do u mean u cant jack it up and take a look? u cant atleast use your jack the car came with and take the wheel off? just wondering. my friends car has that wierd squeak, but its cuz he lowered his car by cutting the springs. wont do that to mine. first thing i thought was it might be a bushing, maybe needs grease or replacement if thats wut it is. hope its not your ball joints.
Keep it HONDA. Or at least Asian.™
*Weber 32/36*Pacesetter Header*2.25 in. Cat Back exhaust*SE-i rear disk brakes
B18C swap ditched, A20 to be revived
Looking for K20/trans for ultimate swap
Just ruling out any possibilites for the cause of the squeaking. (on top of that since the shop forgot to install the rubber insert in the back when it was lowered -maybe the front too had a rubber insert-I did not know never had a reason to check that out)
Now I know its not the cause of the squeak-thanks
Still spraying and waiting. LOL
Bookmarks