Weber Manifold

**L3G10N** · 06-22-2003, 02:56 AM

ok, i've speak with my contact yesterday(who run a a20a dual weber Nos engine at 11.32 1/4miles).

He will do my intake manifold. He can also do more than one manifold. The price is 295$us plus shipping.

It's a manifold polished and the ready to work with weber and accord. plug and play :super:

but the price can be less if we are 5 or more who buy manifold. What do you think?

**shepherd79** · 06-22-2003, 04:49 AM

are you talking about dual DCOE manifold?
it is a good price.

**L3G10N** · 06-22-2003, 05:07 AM

yeah i'm talking about dual Weber Dcom or Dcoe, no matter, it's the same bolt pattern.

that's the price for only one. if 5 persons or more want an intake, the price will be less for sure

AND the price are ok, maybe i can deal it but for something custom made and perfect for us(he tryed 4 customs models he did before)

**mykwikcoupe** · 06-22-2003, 07:17 PM

give me some more info. Are these with carbs? If so are they 40, 45? Does the linkage come with th kit? Do you have to have a mnual like thedowndraft weber conversion? Let me know Im pretty interested for a later date

**L3G10N** · 06-22-2003, 09:50 PM

Nah the price are just for the manifold but if we are many, we can get a better price. the manifold are custom, so if you want to put 45, you'll get a manifold for the 45. The linkage kit and weber are not included in the price. For the conversion, when i'll start mine, i'll post a few "how to" same if already a few members of the board have already did the job. I will be able to post a few pics of some manifold already did by the guy in question. He run 2 Dcoe 40 with 2 stage Nos, so, the manifold have to do the job.

For the weber, i'll buy a 6 packs with a guy from here, so after, i'll have 2 webers extra to sell

**L3G10N** · 06-23-2003, 06:54 PM

ok we are 3 here who will buy weber AND intake. More want to join? more we are, less the price will be! :super:

**L3G10N** · 06-24-2003, 03:49 PM

nobody?

**L3G10N** · 06-25-2003, 09:20 PM

you all don't know what you'll miss

**fuelpump** · 07-12-2003, 09:56 PM

I could be interested about to buy a complete kit whit your 2 weber left

**chronicsinners** · 07-13-2003, 11:41 PM

wait until my semester ends and i go on co-op i am 100% going to be in. sorry for the delay

**SPDboy** · 07-14-2003, 04:32 AM

:removed cuz I am an idiot:

***A20A1*** · 07-17-2003, 10:00 PM

By polished you mean they polished the exterior right?
Polishing the inside will only cause the fuel to stick to the manifold.

**Mike's89AccordLX** · 07-18-2003, 07:39 AM

Hey would the weber manifold work with the jdm b20a? Let me know and I will be in. When do we have to pay? Might be in a couple weeks unless I get a loan faster than I thought. And with the 2 carbs are the 45's? Brand new? How much for them? And what's this about an intake? Didn't know you could have one with dual carbs.

**L3G10N** · 07-18-2003, 08:35 AM

yes the manifold will work for the b20a, it'S the same bolt pattern and i'm asking a manifold to the guy for my b20a anyway.

about polishing, the guy told me that he have a better performance when his manifold was ported and polished

about the carb, i'm ordering 6 40Dcom but already reserved, you can even order some for yourself

**Mike's89AccordLX** · 07-18-2003, 08:53 AM

Oh sweet! I know I will want dual carbs if I keep my a20a1 or not. So I'm in dude! When do I need the money by? I hope shipping won't kill me since you're in Canada. Could you get a shipping estimate for me to 56001, USA?

**Mike's89AccordLX** · 07-18-2003, 08:56 AM

I should get the award letter from my college to see how much of a loan I can take out. Then I will take a loan out. And then the next day I will go back and say I need more b/c it's not enough. And then if I don't have enough money for my tools and manifold I will get another and then that should be enough for the engine too. I'm glad my moms paying for college. Otherwise I'd be in debt. I might even be able to pay for it sooner even without the loans so just keep me informed b/c I want one for sure man.

**fuelpump** · 07-18-2003, 08:58 AM

the carbs are already reserve but order some more and get a better price

**Mike's89AccordLX** · 07-18-2003, 09:28 AM

Well I would want 45's. And I was wondering if you would want a strut bar? I could make you one if you knock some of the price off that manifold. PM me I'll give you details.

**Mike's89AccordLX** · 07-18-2003, 09:32 AM

Well I would want 45's. Hey I was wondering if you wanted a strut bar? I cold make you one and you could knock some money off the maniold. PM me and I can give you more info.

**L3G10N** · 07-18-2003, 12:04 PM

Originally posted by Mike's89AccordLX
Well I would want 45's. And I was wondering if you would want a strut bar? I could make you one if you knock some of the price off that manifold. PM me I'll give you details.

I can ask the guy to add two 45 for you, as fuelpump told, maybe i'll be able to get a better price, since this one is hard to beat...

I'll check for the shipping next week cause now, i'm not at home i'm 2 weeks off

. For the manifold price, more i will ask to the guy, less the price will be, so, just find some other guys interested in and the price will be better.

About the strut bar, i need one for sure but for rear cause in front, it's simple, i just have to take a 90-93 accord bar and just rotate the horse ring to fit the bolt pattern of the 86-89. Except if you have an insane price, i'll take my 90-93 here. But if you can get a rear strut bar, i'll be interested in for sure

take care
Dany

**89AccordHatch** · 10-01-2003, 07:55 PM

im very interested! looks like im #4!

**L3G10N** · 10-01-2003, 09:21 PM

since fuel pump don't even answer me and Mike are unable to get the manifold as supposed, in fact, it's an error between him and me, I have an extra manifold.

For the weber, they are not ordered yet because i need to order 6 weber at least to get this deal. We are still two and waiting for the third.

**doug** · 10-02-2003, 06:26 AM

if what you are saying is you have an extra manifold in hand and you would be kind enough to put up pictures of it then put a hold
on it. If it is as you say, 300 and of good materials and fabrication
I'll take it.

**89AccordHatch** · 10-02-2003, 04:34 PM

so how many do we have on the list to buy manifolds?

**L3G10N** · 10-02-2003, 05:43 PM

mine are almost done, just miss the weber because it's not yet ordered. And another one was for Mark but it was a mistake, so for the moment, i'm the only one