I just bought a clifford alarm system (no instructions had to download from clifford a half a$$ guide) and i was installing it in yesterday, i got the alarm to work, but i cant get the keyless entry to work, i heard i can wire it in the kick panel (dont know where that is) also if anyone knows where i can tap in for 12volts power?
Oh and does anyone know if theres parking light wires under the dash??? thx alot
I would suggest if you've never installed an alarm before to take it to a shop.
As far as the wires everything you need is under the dash, 12v, door grounds, lights, power lock grounds, etc etc.
You either have to have an instalation manual to know which wires are what, or try tracing them back to the source. Which will take forever.
If you would ask in the audoi and security you will probably get better responses.
go to bulldogsecurity.com and download a wiring diagram
the hard part is not the alarm wiring, but finding the correct wires in the car.
Hey thanks 4 the help, i was able to do it (thank god lol), i installed the alarm system, keyless entry works, parking lights work! But there is a option to hook up a Accessory and a Accessory w/timer, i was wondering what i can use these for (anyone got any idea's)
is it possible to use the timer accessory to roll up the windows once the car is armed?
Dude, trying to put an alarm in, is way out of your league, but good luck, maybe you can show me wrong.
accessory with timer I think would be for the dome light and you can use the other one to pop your trunk
Eric
3geez member since October 12, 2000
"All this worldly wisdom was once the unamiable heresy of some wise man." - Henry David Thoreau
Posting Permissions
Reply With Quote
Bookmarks