Results 1 to 21 of 21

Thread: GSR style short shifter GROUP BUY!

  1. 07-29-2003, 03:59 PM #1
    wickedaccord
    wickedaccord is offline
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469

    GSR style short shifter GROUP BUY!

    please let me know if there r any of u guys that will be interested in this short shifter. i recently put a STOCK GSR shifter in my 89 accord and it works awesome! using it with a stock GSR shift nob is a major difference in precision. although this one will be aftermarket, it'll help just as much.

    1. so wat i need to know is, how many of u guys r interested?

    2. do not expect this to be PERFECT. due to the small ball joint on the stock a20 shifter cup.. the GSR style short shifter's ball joint will need to be shaved down. it will not look perfect.. but will work PERFECT! as mine is working perfect for me and it's a stock one.

    3. i need to know how much everyone is willing to pay. let's be resonable becuz i have to spend money on grinding the ball joint down. mine cost 20 bucks. but if i can get atleast 10 to 12.. we're looking at about maybe 5 - 10 bucks. then there's shipping. plus u gotta pay for the short shifter itself.

    so let me know wat all of u guys think. i can start this as soon as i get word from all u 3geez fanatics. here is a link to wat the short shifter will look like. hint! will look like ok. this is the GSR style...

    -buyers so far
    *matt
    *NXRACER
    *88' Accord Ltd
    *GHOST_NY
    *UNANIMOUS PERSON

    http://www.nopionline.com/index.cfm?...strShifter.jpg

    jon
    Last edited by wickedaccord; 07-30-2003 at 08:24 PM.
    benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
    www.full-race.com



  2. 07-29-2003, 04:03 PM #2
    NXRacer
    NXRacer is offline

    NXRacer's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 LXi Hatch
    Location
    Tri-Cities, WA
    Posts
    6,557
    so we have to pick up a GSR shifter, then send it to you +20 bucks & s/h??

    Not a bad deal at all if i can find a GSR shifter........
    Nothin' 2 Old Racing
  3. 07-29-2003, 04:04 PM #3
    ‹^› ‹(•¿•)› ‹^›
    ‹^› ‹(•¿•)› ‹^› is offline
    2.0Si User ‹^› ‹(•¿•)› ‹^›'s Avatar
    Join Date
    May 2002
    Vehicle
    1988 / Honda / Accord / LX-R
    Location
    nYc
    Posts
    3,475
    You Know i am down!
    -=PROJECT-=-

    NOTE: Project-R Swap parts provided by Racing Impulse. Swap was Performed by RacingImpulse & Next Wave Auto Performance.

    B-Series Wants You
  4. 07-29-2003, 04:07 PM #4
    wickedaccord
    wickedaccord is offline
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469
    no no no.. i can provide allll the GSR style short shifter. do remember that it is not a STOCK one ok. so u dont need to provide any.. all the short shifters will be provided and when u recieve.. jus put it on. i will make sure all the shifters fit properly before it is sent out. as of now, i jus need to know how many is interested.... thanks guys

    jon
    benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
    www.full-race.com
  5. 07-29-2003, 04:08 PM #5
    NXRacer
    NXRacer is offline

    NXRacer's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 LXi Hatch
    Location
    Tri-Cities, WA
    Posts
    6,557
    i'm down.

    can you put out a ballpark figure on the price?
    Nothin' 2 Old Racing
  6. 07-29-2003, 04:09 PM #6
    ‹^› ‹(•¿•)› ‹^›
    ‹^› ‹(•¿•)› ‹^› is offline
    2.0Si User ‹^› ‹(•¿•)› ‹^›'s Avatar
    Join Date
    May 2002
    Vehicle
    1988 / Honda / Accord / LX-R
    Location
    nYc
    Posts
    3,475
    Originally posted by wickedaccord
    no no no.. i can provide allll the GSR style short shifter. do remember that it is not a STOCK one ok. so u dont need to provide any.. all the short shifters will be provided and when u recieve.. jus put it on. i will make sure all the shifters fit properly before it is sent out. as of now, i jus need to know how many is interested.... thanks guys

    jon
    Question? Do they have to be Stock GSR shifters? Or can an after market Shifter also be used?
    -=PROJECT-=-

    NOTE: Project-R Swap parts provided by Racing Impulse. Swap was Performed by RacingImpulse & Next Wave Auto Performance.

    B-Series Wants You
  7. 07-29-2003, 05:13 PM #7
    wickedaccord
    wickedaccord is offline
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469
    oh no no no.. this will be AFTERMARKET. MY STOCK gsr shifter is good! but it still isnt as short as an aftermarket short shifter. mine's only for precision.. it's wat i want.

    the ones u guys will recieve will be AFTERMARKET and not OEM spec. it will be a GSR style curve and not ur regular style curve as the one u use everyday. that's 2!

    remember the more the cheaper it'll cost to grind it down. ill give u the whole price deal as soon as i can get a hold of my friend.

    Last edited by wickedaccord; 07-30-2003 at 08:23 PM.
    benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
    www.full-race.com
  8. 07-29-2003, 05:49 PM #8
    shepherd79
    shepherd79 is offline

    shepherd79's Avatar
    Join Date
    Apr 2002
    Vehicle
    01 Civic lx auto; 03 Accord EX
    Location
    Falling Waters, WV USA
    Posts
    9,466
    just tell us the final price, and we tell you if we want them or not.
    Alex.
  9. 07-29-2003, 06:58 PM #9
    wickedaccord
    wickedaccord is offline
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469
    ill figure it out tonight and let u all know tomorrow if anything.... sorry im jus not sure if u guys would be interested or not......

    jon
    benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
    www.full-race.com
  10. 07-29-2003, 07:59 PM #10
    wickedaccord
    wickedaccord is offline
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469
    alright! 69 bucks shipped and everything will be taken care of. it'll be tested and fitted before it is shipped. and a reminder.. IT WILL NOT LOOK PERFECT!! so do not pm me back or make a post a thread being disappointed in the look. let me know how many r willing to buy and ill give the address to send money order to. thanks

    Jon
    benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
    www.full-race.com
  11. 07-29-2003, 08:01 PM #11
    89AccordLvr
    89AccordLvr is offline
    LXi User
    Join Date
    Sep 2002
    Vehicle
    1989 Honda Accord Lxi Hatchback
    Location
    orlando,fl... kissimmee to be exact
    Posts
    712
    very interested but i also need to kno the final price so you will do the grinding and everything do we need to do anything to make it fit or is it gonna be just a slap on and go.
    Mods:
    *2.25" custom Catback with
    Tsudo Carbon Fiber
    Titanium Tip Muffler
    *Racing Xtreme carbon fiber
    pedals
    *Civic Short Ram Intake
  12. 07-29-2003, 08:13 PM #12
    wickedaccord
    wickedaccord is offline
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469
    final price is 69 dollars shipped and everything.. like i said. it'll be tested and everything before it is sent out. all u have to do now is install it. i myself will make sure it fits properly. mark my word for good business.. u can check out my ebay feedbacks if u like.. ebay name is EVENBOY. 100% positive feedback. this is gauranteed to work becuz i am currently using a STOCK GSR shifter.

    jon
    benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
    www.full-race.com
  13. 07-29-2003, 08:20 PM #13
    88LXi68
    88LXi68 is offline
    3Geez Veteran 88LXi68's Avatar
    Join Date
    Oct 2000
    Vehicle
    '88 Accord LX-i
    Location
    Connecticut
    Posts
    4,120
    FUCK! If I sell some shit I am in, but right now I can not get freakin $69. This is sooo sad.
    '88 LX-i Coupe --- LS/Vtec
    '08 Accord EX-L 6-6 --- Daily Duty
  14. 07-29-2003, 08:34 PM #14
    89AccordLvr
    89AccordLvr is offline
    LXi User
    Join Date
    Sep 2002
    Vehicle
    1989 Honda Accord Lxi Hatchback
    Location
    orlando,fl... kissimmee to be exact
    Posts
    712
    how long will you be holding the group buy , when is the deadline? also what you mean it wont look perfect is it that ugly looking can you show us yours on your accord so we can see how it looks
    Mods:
    *2.25" custom Catback with
    Tsudo Carbon Fiber
    Titanium Tip Muffler
    *Racing Xtreme carbon fiber
    pedals
    *Civic Short Ram Intake
  15. 07-29-2003, 08:42 PM #15
    wickedaccord
    wickedaccord is offline
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469
    well lets jus say that when mine was grinded down.. the ball joint wasnt PERFECTLY ROUNDED. jus enough to fit the bearing and to drop into the cup. that's wat i mean. but u know wat.. it works! ill try to take mine out tomorrow for an example. one more thing to be mentioned.. make sure the ball joint is GREASED before putting into the bearing for lubrication. nothing major.

    but i want to get as much order as i can. ill give 3geez a week before the deadline. so that's next tuesday. ill be ordering a dozen short shifters to be ready tomorrow. u will recieve an email when it is sent and a tracking number. and jus for caution.. i would prefer POSTAL MONEY ORDER and NO personal checks becuz i am not profiting. i will pm all the buyers an address and name to send it to in the end. thanks guys

    jon
    benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
    www.full-race.com
  16. 07-29-2003, 10:55 PM #16
    Low Tek
    Low Tek is offline
    SEi User Low Tek's Avatar
    Join Date
    Sep 2002
    Vehicle
    lookin
    Location
    Portland Oregon
    Posts
    1,280
    I thought pacesetter made a shortshifter for the 3geez already, I got mine from a parts store hear in portland, for less then 50.. hmm
    'honda makes people happy'
  17. 07-30-2003, 04:30 AM #17
    88LXi68
    88LXi68 is offline
    3Geez Veteran 88LXi68's Avatar
    Join Date
    Oct 2000
    Vehicle
    '88 Accord LX-i
    Location
    Connecticut
    Posts
    4,120
    Originally posted by Low Tek
    I thought pacesetter made a shortshifter for the 3geez already, I got mine from a parts store hear in portland, for less then 50.. hmm
    They do, but have you ever seen an Integra shifter?

    Integra...


    Th accord shifter is much straighter. The idea behind the integra one is that it requires less arm movement because it is bent back further.
    '88 LX-i Coupe --- LS/Vtec
    '08 Accord EX-L 6-6 --- Daily Duty
  18. 07-30-2003, 04:49 AM #18
    ghost_ny
    ghost_ny is offline

    ghost_ny's Avatar
    Join Date
    Mar 2003
    Vehicle
    88' accord lx(soon to be vtec)............. 93' accord ex(the next project)
    Location
    long island new york
    Posts
    261
    I'm in, just pm me when you are ready to get payments.
    "I AM THE GHOST... FLOAT WITH ME"
  19. 07-30-2003, 07:07 AM #19
    89AccordLvr
    89AccordLvr is offline
    LXi User
    Join Date
    Sep 2002
    Vehicle
    1989 Honda Accord Lxi Hatchback
    Location
    orlando,fl... kissimmee to be exact
    Posts
    712
    will you be holdin more group buys or selling them in the future. you could ante up the price after if it becomes more expensive if its only one person buying it i would mind paying more later
    Mods:
    *2.25" custom Catback with
    Tsudo Carbon Fiber
    Titanium Tip Muffler
    *Racing Xtreme carbon fiber
    pedals
    *Civic Short Ram Intake
  20. 07-30-2003, 09:19 AM #20
    wickedaccord
    wickedaccord is offline
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469
    i dont know how often i can make it available due to my supplier. best bet is this is the best one time deal. when it is settled.. i will only order 2 extra and made.

    Jon
    Last edited by wickedaccord; 07-30-2003 at 09:52 AM.
    benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
    www.full-race.com
  21. 08-02-2003, 02:05 PM #21
    wickedaccord
    wickedaccord is offline
    LX User wickedaccord's Avatar
    Join Date
    May 2002
    Location
    SoCal VinDictor
    Posts
    469
    is there anyone else that want this?? if not, i may start collecting soon. for those who want this, please pm me ur addresses jus in case. u can all pay through paypal to make things easier. thanks

    Jon
    benson\'s 2.0 resleeved GSR block, PnP b16 head/multi angle valve job, ctr cams, hondata i/m gasket, str 68mm t/b, skunk springs/retainers, hondata s200b p30 ecu, LSD cable tranny, full race stage3 GT turbo kit (GT35R) custom 3 inch exhaust
    www.full-race.com
« Previous Thread | Next Thread »

Similar Threads

  1. Short Shifter
    By F1RST_PR1ME in forum 3geez Accords
    Replies: 5
    Last Post: 03-23-2011, 11:10 PM
  2. short shifter help
    By ridered9hbs in forum Performance
    Replies: 3
    Last Post: 02-16-2006, 10:09 PM
  3. ferrari style shifter
    By ShawnS in forum Interior & Exterior Care
    Replies: 22
    Last Post: 08-28-2005, 11:12 PM
  4. WTB: short shifter/short throw
    By original2k in forum Trading Post
    Replies: 15
    Last Post: 03-11-2004, 04:28 AM
  5. Short Shifter
    By Brettmans5 in forum 3geez Accords
    Replies: 6
    Last Post: 06-08-2003, 10:39 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink