For Sale: B20a W/manual Trans

**88LXI** · 08-05-2003, 04:31 PM

comes with integra dist and angle sensor and new plugs, wires, cap, and rotor. asking 700.00 + shipping.... would prefer local pickup

THANX FOR LOOKING!!!!!!!!!!!!!!!

**88LXI** · 08-05-2003, 04:33 PM

it also has new timing belt and tesioner

**MrBen** · 08-05-2003, 04:37 PM

Wait a second.. why so cheap? How many miles on it, and why are you selling it?

**88LXI** · 08-05-2003, 06:10 PM

accually thats not that cheap to me... i bought it for less because the guy at the import engine place didnt know what it was and couldnt sell it.... im pretty sure the milage is under 60000 because the engine is so clean. i drove it for like 6 months with the engine... it had no mechanical problems, i think the clutch is a bit weak but other than that it worked fine.. im selling it because i changed back to my stock engine to sell my car and the b20a seperately, i wanted to do that because whoever would buy the car from me with that engine wouldnt have a clue about it and wouldnt even care that it was in there. this way someone gets it that really wants it and wants to have fun with it and the person that buys the car doesnt have to worry about jdm parts or anything when they want it fixed... make sense? hope so

**89AccordHatch** · 08-05-2003, 08:49 PM

i wish i could buy it..but i wont have that kinda money til i sell my turntables. damn

**88LXI** · 08-05-2003, 10:16 PM

c'mon.... someone give this thing a home

**Busted_Blue** · 08-05-2003, 10:32 PM

shame..i dont have the money for it.. Is this the whole package? what other parts would i need for this complete swap?

**od2681** · 08-05-2003, 10:41 PM

dude i might be getin 500 bucks soon..so i might be interested...

**blazin3gen** · 08-05-2003, 10:43 PM

it seems everyone is interested but are broke just like me! hehe

did i mention i want it but im broke too lol

**sixgears** · 08-05-2003, 10:53 PM

I'm in Kennewick, WA, I'll be in Boise at the end of the month for a kart race......Gotta look into funds, might be able to make it work. Catch me on AIM.....SS4DODGE

**88LXI** · 08-06-2003, 06:19 AM

well lemme know sixgears, i would rather not have to ship it but, if someone came up with the money i wouldnt say no

**Busted_Blue** · 08-06-2003, 07:03 AM

How much is it to ship to california? I got some funds in the bank...just wanna see if i'm willing to use it. =\

**Mike's89AccordLX** · 08-06-2003, 07:39 AM

88LXI check your PM's b/c I sent one a few hours ago wanting it.

**BITESIZE** · 08-06-2003, 09:07 AM

Vern, that engine looks sweet! You should just give it to me for 5 bucks! :super:

**88LXI** · 08-06-2003, 10:28 AM

yuck fou bitesize... you cant have this engine... you are too small

**HostileJava** · 08-06-2003, 11:00 AM

Damn I should just buy this whole package and throw it in the hatchback. Listen to bitesize and sell it for $5.

**A Dawg Jr** · 08-06-2003, 06:07 PM

How much does that thing weight??

**88LXI** · 08-06-2003, 10:34 PM

i think between 3 and 4 hundred

**dXsquared** · 08-06-2003, 10:36 PM

sell it to Mikes89AccordLX

he needs it bad

Travis

**Mike's89AccordLX** · 08-07-2003, 05:49 AM

OMG dude!!! I sorta lied to my mom about how much money
I have for tools and well I just have to pay $1700 and she's paying the rest :super: I want it, can you give me a detailed list of everything it comes with and what's new and what parts you think it will need? I'm going to be overhauling the motor at my school for a project for the 1st semester. Going to hopefully find a turbo kit for it and definately going with dual 45's

Please find out shipping to Mankato, 56001. Thanks

**Mike's89AccordLX** · 08-07-2003, 06:08 AM

So no FI setup? Damn I will have to get a manifold and webers earlier than I thought then. Why does it have a teg dist. ? Yeah just give me a detailed list of everything it comes with ok. Does it have A/C cruise or power steering? I can't remember if I can use the P/S setup I have already or if I need a b20 one. Yeah just give me all the info and we should be good.

**88LXI** · 08-07-2003, 06:26 AM

well if you are gonna be overhauling the motor and you want to run boost you need to put forged pistons in it. it pretty much comes with whats in the picture, you will have to use your own intake manifold, starter, alternator, and front engine mount ( one by the radiator. you are gonna want a new clutch, probably a centerforce, the tranny was eceptional and i had no probs with it. the exhaust manifold on it has the oxygen sensor holes welded shut, which is good for you because you want to run carbs. i would also replace the water pump because its much easier to do with the engine out because it driven by the timing belt. i will send you every little piece that i can find in my garage that goes to it dont worry.. i have a few extra little things i think. ok?

**88LXI** · 08-07-2003, 06:27 AM

oh and ill check freight for you today

**Mike's89AccordLX** · 08-07-2003, 06:34 AM

Does it come with that intermediate shaft? Damn I didn't know it needed so much. I will have to do some checking to see how much all the other stuff would be.

**88LXI** · 08-07-2003, 07:09 AM

yes it comes with the intermediate shaft.... i checked on the freight USF Reddaway said it would cost 199.58 if you picked it up from their dock or 325.38 to have it delivered to your door. lemme know if pickup is possible.