heyi have a chace to buy a s2000 for parts relly cheap from an uncle i dont have the money to get it fixed back to normal so i wanna make make the motor fit in my car i have the rear axle and everything would this be possible to do or should i just part the car out.
Bolts right in with Place Racing Mounts..
-=PROJECT-=-
NOTE: Project-R Swap parts provided by Racing Impulse. Swap was Performed by RacingImpulse & Next Wave Auto Performance.
B-Series Wants You
oh ok cool so ill take the cars into the shop and have it done ill let you guys know how it goes.
yes, do that. go ahead, never been tried here so if you do it you'll be the 1st
"Eat, Drink, and be Merry!"
Everybody is with you on this project.
Rooz
That's my other "car" on the avatar, my Dash-8
BUAHAAH good luck. might as well throw in a fucking supra TT setup instead... actually better yet. dual engine 13b wankel power!
naw naw it'll work. Just go up to a shop and say "Can you put this motor in for me?"
My uncle just gave me an s2000 parts car too! Said i can do whatever i want with it. Check out my pictures!!
I think i'm gonna take out the motor and put it in my 3G. Hey briggs, lets get together when its done.....
Nothin' 2 Old Racing
I'm down with a Cummins diesel engine. It comes w/ a turbo! Make sure you put a damn good set of iridium spark plugs in there before you push that boost controller to 30 psi!
Originally Posted by kroy
great, soon we will have the worlds first rwd 240hp 89 accord. you have an LX how do you plan to do this? the labor alone is going to cost more than like 10 of our cars are worth.
86 white hatch LXi with 5spd swap and full system.
hey guys just got back from the shop they said it could be done with a lot of time and money, i need to go to the junk yard and pick up a transfer case for the rear end. if anyone knows is they sll rol cages for a lxi please let me know. they said it would be needed to support the frame of the car.. the s2000 would cost round 12000 to get fixed because the frame of that was bent so if i could pay half that to get this to work id be happy.. thanks for all the positve posts
you'd have to get a roll cage custom made. Why dont you just use the entire s2000 drive train?
Nothin' 2 Old Racing
ok dude...this is not going to be just a SWAP...I looked into doing it awhile back in a hatch and it would work but now that I do not have accsess to a chassis jig I just forgot about it...It is possible but you are looking at cutting the intire car up and buildng a complety custom tube frame...as for a rearend I found that the AE86 was the close to fit but I would not use it because it is weak as hell...a S2000 rear end is too complecated and is too short so just get a 12 bolt chevy or 9-inch ford and chop it and get custom yokes made for it...also you will have to push the firewall back and make a tranny humb inside...too much work and too much $$$...if you have the $$$ do it,other than that dont even try it
if you have the money go for it! It will be the best 3gee swap ever and they sell the vortech supercharger for it that adds something like 100+ hp
http://www.myspace.com/3364524
b20accord SN on honda-tech,homemadeturbo,clubcivic,turbod16, and many more
thank you very much for the info i think i am getting another person to help me with the cost... the guys at the shop said it would be alot cheaper to get alot of the parts from the junk yard... i think these guys can pull it off because they turned a crx into a mid engine car using a 91 nsx motor.
that's going to be da s#it
custom interior: red and white
cat back exhaust
1991 civic ram air intake
18'' inch rims
integra lip
clear bumper lights
all red tails
This may be a dumb question, but is the S2000 totalled? If not, I would rather be driving around in an S2000 any day of the week!
NXRacer,
you almost had me, I just barely caught the body clips on that car...
got a few questions for you
#1 where do you expect to get the money for everything? Paying a shop to do all the work is going to add up really fast seeing as how most charge 70 bucks an hour.
#2 Why not just get a lx-i and drop in a b18c5, slap a turbocharge on it, and then call it a day.
#3 who in the fuck has an uncle that gives away s200's regardless of condition? um year 2000.....
1 . i work and it will prolly be round 25 and hour
2. wont be as fun
3 it was totaled and he dont wanna deal with it im buying it from him for a bout 4500
Wow man that would be sweet!
Hope you know what your getting yourself into.
I do have faith in ya.
Best of luck with everything at the shop.
-Mike from Sarnia!
Mike's Clean Cnd A20A2 5 spd Champaigne Beige Sedan Accord, Eh!
B-Day: 07/87 in Alliston, ON Canada
---------------------------------------------------------------
The best mods are mods that can be modded over and over again.
hay matt you rule for saying that PRI shit... :lol
~<+045+ygH05+>~
hahaha, dude mike that was one nasty shit bro. I love that humor. I gotta see you and maurice together that would be one wacky shit dude. hehehhe bolts right in :lol ur da man.
Well why dont you just get them to make mounts for the engine and do most of the work yourself, then take it in and have them do the rest of the work. You will also have to convert to fuel injection, new wire harness, convert to rwd, they dont make mounts for this swap so you need them custom made= money, replace a whole bunch of things inside of your engine bay, convert to 6 speed, and plenty more after that. So if you want to chuck out the money for it all i would expect to pay around 10k total to get it all ready if a shop was to do it.
I'll believe it when I see it.
Posting Permissions
Reply With Quote
Bookmarks