help please b18b swap

**2draccord** · 08-24-2003, 10:06 AM

im getting a ls motor for 400 bucks but i dont know what mounts i would need for 1988 accord 2dr non carbuated i get the harness with the motor i know i need a ecu and a tranny but im not sure about mounts

**toastyghost** · 08-24-2003, 10:16 AM

Talk to OldSchoolSwap, ask him about a B-series PRI kit. You may want to consider putting a B16A head on it also known as LS/VTEC.

**2draccord** · 09-24-2003, 09:40 AM

What kind of work would it take to build a a20 turbo into a 88 accord

And what kind of work to fit a h22

**danronian** · 09-24-2003, 09:41 AM

try searching in the perforance and engine swap sub-forums

**shepherd79** · 09-24-2003, 09:44 AM

welcome to the board, your question has been answered million times. You should do the search before asking any question.

**4sillypwr** · 10-15-2003, 09:47 PM

SEARCH BUTTON

**BITESIZE** · 12-22-2003, 08:50 PM

mmmmm.......thatwould be fun. Oldschoolswap should have some good pointers. His car is titties.

**3G Jester** · 12-22-2003, 09:17 PM

also 88lxi68 he did the swap too.
steve from CT

**k-roy** · 12-22-2003, 09:56 PM

The swap kit is around $1200 for mounts, custom axles, shifter and a harness.

**OldSchoolSwap** · 12-23-2003, 08:38 PM

Can you clear this up to make sure........ is your Accord Carburated or not?
What model is it Lx or Lx-i?

**2draccord** · 12-24-2003, 10:30 PM

does anyone know what we need to do for the swap what we need for the 3gen accord i know motor tran what about everything elese like wires ecu and axels what needs to be done

**shepherd79** · 12-25-2003, 09:20 AM

welcome to the board. you posted in a wrong section. you need motor swap section.
go there and read the sticky post. they have everything you need.

**85lude** · 12-25-2003, 05:10 PM

place racing makes everything to put you b18b into your car as a direct bolt in. get a hold of oldschoolswap he'll tell you everything.

**Blue Impact** · 01-10-2004, 12:32 AM

Originally Posted by 85lude

get a hold of oldschoolswap he'll tell you everything.

Probably everything you need to know about motorswaps, not everything that happens in his life.

You will definitely need a new ECU and axles if you're swapping. Good luck.

***A20A1*** · 01-13-2004, 12:55 AM

You should modify your profile to include "LX-I" or "LX / DX" next to the type of vehicle you drive.

**OldSchoolSwap** · 01-13-2004, 03:56 PM

Well, the reason i asked about the Fuel injected or Carb is because. The only way that i've done swaps is with Fuel injected Accords.
Place Racing makes the mounts to fit any B series motor into our chassis.

However all B series motors come EFI wich means:

A. convert your carbed vehicle into EFI specs
B. convert your B series motor into Carb specs (not recomended unless strip only)
C. buy an Lx-i or Se-i Accord

**Blue Impact** · 01-13-2004, 11:31 PM

Originally Posted by 2draccord

1988 accord 2dr non carbuated

Can you guys give him a break now?

**k-roy** · 01-15-2004, 03:48 AM

Originally Posted by 2draccord

im getting a ls motor for 400 bucks but i dont know what mounts i would need for 1988 accord 2dr non carbuated i get the harness with the motor i know i need a ecu and a tranny but im not sure about mounts

Click here for what you need to know about the swap.
Here is a place to get the swap kit.