The first thing that comes to mind when I see this is "a 3g?" but what exactly is going on here? The front bumper and part of the ass end make me think 3g, but I dunno.
The first thing that comes to mind when I see this is "a 3g?" but what exactly is going on here? The front bumper and part of the ass end make me think 3g, but I dunno.
I would try and help but I'm not seeing the picture
I may only get 13-18 MPG, but try and follow me in the mud and you'll get stuck.
damn oregonians :lol
damn washington people who couldn't post pics:lol
I may only get 13-18 MPG, but try and follow me in the mud and you'll get stuck.
it is a legend. you can see the by the front bumper. the lenses are longer and little curved. the hole body is wider and londer.
Alex.
It is a first gen legend. I saw it at a show last year.
They slammed on some pretty big rims there!!
I wonder if pearldrop knows anything about that car.
Nothin' 2 Old Racing
Yeah, it is sitting flat on the ground with 19 inch wheels. It has a 3 1/2 inch unibody drop which is an insane thing to do. They actually cut the bottom of the car away and rebuilt it which included raising the engine and suspension mounts (which is why it has the hood). This is one of the only unibody drops in the country that actually ended up being a very nice car.
^^ wow ^^
- J u n i o r -
Originally Posted by 89ACCORDVTECH
dayummmmmmmmm , not my taste but still impressive
i was wondering about that pic. i thought it was kinda funny how the nose didnt come to such a point where the corner light goes. nice car anyway. any well, you can see its '80s honda styling. looks good to me.
Keep it HONDA. Or at least Asian.™
*Weber 32/36*Pacesetter Header*2.25 in. Cat Back exhaust*SE-i rear disk brakes
B18C swap ditched, A20 to be revived
Looking for K20/trans for ultimate swap
Speedbumps and little squirrels are that car's worst nightmare.
natsugusa ya
tsuwamono domo ga
yume no ato
or ants, gnats, and anyother bug on the ground
you can tell its a legend by the body lineson the back quarter, kinda comes out a littel bit. but what are those headlights from? looks like , i duno maybe acorsica or a beretta? im probably wrong
Last edited by ryan88lxi; 09-10-2003 at 07:52 PM.
still miss mine . . .
The headlights are from a 94-97 Accord.
He has air suspension so there are no worries about speedbumps. He can still lift it up to almost stock height.
what did he do about the wheel housings? I mean he can't cut the whole fender well out b/c then he woundn't have any mounting points for the strut tops. I know you said he relocated all the mounting points, but the stock strut tops are very close to he inner hood as it is, and it doesn't look like his hood is raised at all in above that area.
-Mark D.
I'm not sure, I haven't seen under the hood, but I'm sure it has plenty of tube framework under there. To get the prelude lower I have to cut out the top of the strut mounts and build a small tube structure to mount the cylinder higher. Of course, since that is a bigger car, there may be room for the cylinders to lay the car out with the stock mount. There are always other ways to get it lower.
your lucky I live in Southern Oregon. LOLOriginally posted by kicker1_solo
damn oregonians :lol
I'm your local R&D nut. Fabracting, welding, tuning and breaking my stuff so you don't have to.
Bookmarks