Prob. with idle

[mag_pbg]

I did a search and couldn't find anything over this so I decided to ask, I just put on a new ram air intake, and I hooked up the PVC, but I have 4 vacume lines left, and worst of all my car idles at like 250 now it is just bearly over the 0 mark. Today I went to test it out, and at every stop light i stoppped at the stupid thing died and I would have to put it in neutral, rev up a little and drop it into drive (not good on tranny I know) so my question is how do I adjust the idle, I have never been able to locate the screw for it.

[88floats]

most likly you need to plug the vacume lines but Im not shure. I have a short ram intake but I never had to mess with any vacume lines what did they hook up to.

[mag_pbg]

I messed around with it a little bit and I got the idle up a little, but it still seems really low. Two lines went to the old intake hose where it bends near the throttle body, the other two hooked to the filter box.

[1988starter]

Plug the two to the filter box and put the other 2 in the intake piping.