is it even possible...bolt pattern diff or not right offset?
finding these rims/ w/ tires for real cheap around here.
:smokin:
is it even possible...bolt pattern diff or not right offset?
finding these rims/ w/ tires for real cheap around here.
:smokin:
3rd Gen Accord Shirts and Stuff
Some of my Drawings
85 IROC Z28,TPI 355ci,700r4, 9.4:1 Aluminum pistons, COMP CAMS street/strip hyd roller cam, HYE TECH ported/polished heads, HOOKER Longtubes, Full 3 inch exaust NO Cat, TPIS alum fuel pressure reg, ACCEL distributor, custom programed chip from Performance Resource, Competition Engineering shocks. 10/90 front 50/50 back. Eibach drag springs up front. Auburn posi. SLP cold air induction and airfoil.batt relocated w/ kill switch.Still on street tires (Kuhmos all around)SOLD
87 IROC Z28, TPI 350ci, 700R4, 3.42 Posi, 4 wheel disk, Completely Stock (Wrecked)
1987 LXi 2.0 auto
What model year. The GTS has been in production for a pretty long time frame.Originally posted by Dustin Imports
is it even possible...bolt pattern diff or not right offset?
finding these rims/ w/ tires for real cheap around here.
:smokin:
H&R springs revalved Bilstein front struts, koni struts in the rear 195/55-15 Dunlop W-10's Dc Sports header custom cat-back with Dynomax super turbo w/3" Brembo slotted & dimpled rotor's EBC pads
Well, that's what I used to have, wrecked, 7/3/02.
Now I d
i saw one today and its a 5 bolt pattern
:smokin: 87 Accord lx-i hatchback no mods done yet, just bought the car. Got alot plans for this car though. http://www.cardomain.com/id/87lxiaccord
My ex has a 97 Gt with a five lug pattern. Maybe an older one will work. 1990 and 2002 use five lug. I see a 1984 uses a four lug design. I was flipping through cardomain.
------------------
newer ones 2000 and up i think...
are we 4 bolt patterns?
3rd Gen Accord Shirts and Stuff
Some of my Drawings
85 IROC Z28,TPI 355ci,700r4, 9.4:1 Aluminum pistons, COMP CAMS street/strip hyd roller cam, HYE TECH ported/polished heads, HOOKER Longtubes, Full 3 inch exaust NO Cat, TPIS alum fuel pressure reg, ACCEL distributor, custom programed chip from Performance Resource, Competition Engineering shocks. 10/90 front 50/50 back. Eibach drag springs up front. Auburn posi. SLP cold air induction and airfoil.batt relocated w/ kill switch.Still on street tires (Kuhmos all around)SOLD
87 IROC Z28, TPI 350ci, 700R4, 3.42 Posi, 4 wheel disk, Completely Stock (Wrecked)
1987 LXi 2.0 auto
Yes we have 4x100mm bolt patterns. An offset of 42-45 mm can be used.
Check out this sweet ride.
http://www.cardomain.com/memberpage/435444
That is the current generation with a five lug pattern.
I drove one and it is friggin awesome.
------------------
Celica GTSs had a 4-bolt patten 82-85, but since they were rear wheel drive the offset is probably not going to work. From 86 up I think they were all 5-bolt.
Mike
it wont work. we have a 4x100 pattern and the new celicas have 5x114.3Originally posted by Dustin Imports
newer ones 2000 and up i think...
are we 4 bolt patterns?
:bh:
3rd Gen Accord Shirts and Stuff
Some of my Drawings
85 IROC Z28,TPI 355ci,700r4, 9.4:1 Aluminum pistons, COMP CAMS street/strip hyd roller cam, HYE TECH ported/polished heads, HOOKER Longtubes, Full 3 inch exaust NO Cat, TPIS alum fuel pressure reg, ACCEL distributor, custom programed chip from Performance Resource, Competition Engineering shocks. 10/90 front 50/50 back. Eibach drag springs up front. Auburn posi. SLP cold air induction and airfoil.batt relocated w/ kill switch.Still on street tires (Kuhmos all around)SOLD
87 IROC Z28, TPI 350ci, 700R4, 3.42 Posi, 4 wheel disk, Completely Stock (Wrecked)
1987 LXi 2.0 auto
Bookmarks