Guys, I have an 87 accord lx, and i am planning to put on the custom bodykit, ie. cutting the top half of the 87 bumper and putting it under the 89 bumper. My dumb question is that will the 89 bumper fit the 87...
oh and how would it look on the stock height... would i have to lower it to make it look good...
thanx a lot guys
The bumper will fit. Just remember the lower you go, the more your going to scrape.
NO SHIT!!!!!!!!!!!!!!!!!!!!
I havent forgotten my roots
Well thanx for your informative post, I'm sure everyone who reads this thread will walk away in awe thinking he's(hondamanlxi) so smart.Originally posted by hondamanlxi
NO SHIT!!!!!!!!!!!!!!!!!!!!
Last edited by HostileJava; 10-15-2003 at 01:26 PM.
he's my idolOriginally posted by HostileJava
Well thanx for your informative post, I'm sure everyone who reads this thread will walk away in awe thinking he's(hondamanlxi) so smart.
im planning on doing the same thing but putting the 88-89 top on my 87...i already have my car dumped about 3" so its going to be even MORE of a challenge driving about on these shitty PA roads
check out my car and the body kit i had on there. My car is dumped at least 3 inches and it wasnt that bad. I'd hit a couple things, but not as bad as everybody thinks.
Nothin' 2 Old Racing
Yea I don't have much free time but I have an extra bumber so I'm going to cut it up.
I'm your local R&D nut. Fabracting, welding, tuning and breaking my stuff so you don't have to.
does someone have a pic or somethin. i wanna see how this looks
-Brian
-"lifes a bitch,i swear to god, you take your chances, too many questions and not enuogh answers!"-nappy roots
My Accord
i'm gonna do wone, but with a lot of extra molding and shit done... if i find another 3gee
How did you get that front spoiler to fit on there... and what other body kits would fit on an 3 geez 2drOriginally posted by NXRacer
check out my car and the body kit i had on there. My car is dumped at least 3 inches and it wasnt that bad. I'd hit a couple things, but not as bad as everybody thinks.
civic lip versus alabama roads! My car has 4.5in of ground clearance! I like your idea about using an accord bumper! I just happen to have this civic bumper laying around from when my buddy got his bc kit!
of course its fixed now!
Last edited by hondamanlxi; 10-19-2003 at 09:32 PM.
I havent forgotten my roots
kicker and hostile...... you guys can F*ck off! I dont need a IQ test everytime i TRY to STRESS a point! and just b/c you dont see me putting in 10,000 posts of useless garbage doesnt mean im just some dumb riceboy off the street! And finally,ive never owned a car with less than a 2in drop and im pretty sure i've spent more time fixing front ends than alot of you, hence my 'no shit' post! I must of been in a hurry b/c i meant to attach the above pic to my first post.
Irregardless, I would make the lip, its fun while it lasts! The best part about the accord bumper is NO MAJOR MOLDING!
Last edited by hondamanlxi; 10-20-2003 at 04:02 PM.
I havent forgotten my roots
Never been in a car with less than a two inch drop?! Your mom had a lowered car in the late 70's/ realys 80's when she had you?
No it just sat that low when she got in it. Then edit the damn post and I'll edit mine
grow the f'ck up!
use pms!
I havent forgotten my roots
it fit right on almost perfectly. Of course like any body kit not made specifically for the 3rd gen accord there have to be modifications, but it'll fit with just a little mod. Search around, there are a TON of threads on here about body kits.Originally posted by lethalfarmecopia
How did you get that front spoiler to fit on there... and what other body kits would fit on an 3 geez 2dr
Nothin' 2 Old Racing
imran, make sure you plan out what part of the bumper you plan on using. You want to make a few cuts as possible! It makes for a better front lip than my halfassing! The only other advice i have is ... plan on fliping the bottom piece over so you have an easy way to mount it!
pm me if your confused
I havent forgotten my roots
Well for the people that have add an lip what did you use to hold it on, and no I'm not going to use zip ties and have it look cheap.
I'm your local R&D nut. Fabracting, welding, tuning and breaking my stuff so you don't have to.
Your idea for the top half of the bumper on the botton is a good idea i think i could pick one up for less than $50 at a salvage yard and if it looks good wich i think it will considering the way the bumper is formed it will be alot cheaper than a kit custom made to fit a 3gee.
Tuner for life!
Shadowz Car & Truck Club
Oklahoma City, Oklahoma
___________
Vehicles:
91 Accord LX 2dr
87 Accord LX-i (Needs motor work)
Oh yea much cheaper. So what is the best for securing it pop-rivits or ?????
I'm your local R&D nut. Fabracting, welding, tuning and breaking my stuff so you don't have to.
the bottom of any bumper is rolled which makes a nice place for screws! follow? if your butting two bottoms together its perfect!
I havent forgotten my roots
Well screws will work but I'm thinking that rivits will work best.
I'm your local R&D nut. Fabracting, welding, tuning and breaking my stuff so you don't have to.
Posting Permissions
Reply With Quote
Bookmarks