Ok, If you wana make your car go fast-SPRAY IT!!! I have 245,000 miles on my car and have been spraying for the past two weeks!! If you dont tune it right you will blow hurt your moter!! If you bump the rev limiter while spraying you can fuck your moter!! I have a NX wet kit with a 50 shot and its doing nothing but haul ass!! I had to retard my timing and bump my plug gap to .40 from .50!!! Im running again on wed and it will go 15.4 or better!! Dont be afraid :super:
Cold Air intake, Apexi N1 turbomuffler w/2.25 piping, H22 injectors,gutted cat, Dc sport header, accel coil, MSD ignition, Dropzone coilovers
Thats funny. A 15.4 with juice. I have so many friends who would get a kick out of that one. Oh yea, say bye bye to your motor. It will not last much longer.
------------------
what track?Originally posted by Kevin
Ok, If you wana make your car go fast-SPRAY IT!!! I have 245,000 miles on my car and have been spraying for the past two weeks!! If you dont tune it right you will blow hurt your moter!! If you bump the rev limiter while spraying you can fuck your moter!! I have a NX wet kit with a 50 shot and its doing nothing but haul ass!! I had to retard my timing and bump my plug gap to .40 from .50!!! Im running again on wed and it will go 15.4 or better!! Dont be afraid :super::smokin:
3rd Gen Accord Shirts and Stuff
Some of my Drawings
85 IROC Z28,TPI 355ci,700r4, 9.4:1 Aluminum pistons, COMP CAMS street/strip hyd roller cam, HYE TECH ported/polished heads, HOOKER Longtubes, Full 3 inch exaust NO Cat, TPIS alum fuel pressure reg, ACCEL distributor, custom programed chip from Performance Resource, Competition Engineering shocks. 10/90 front 50/50 back. Eibach drag springs up front. Auburn posi. SLP cold air induction and airfoil.batt relocated w/ kill switch.Still on street tires (Kuhmos all around)SOLD
87 IROC Z28, TPI 350ci, 700R4, 3.42 Posi, 4 wheel disk, Completely Stock (Wrecked)
1987 LXi 2.0 auto
Let me be the first to congratulate you on your purchase!
Here's more proof that a wet n2o kit will be fine on just about any motor. (esp NX) This is also a testament to the strength of our motors. I'm gonna get a full blown kit for my car if/when it gets running again.
Last edited by NXRacer; 11-10-2003 at 09:13 AM.
Nothin' 2 Old Racing
do you see those speed blurs when you hit nitro? and do you get those flames to come out the tail pipe too? Thats wicked sweet......
15.4 with juice? right.......
Your 4MB signature image has been deleted.
^And I'm going to leave it that way.
a20 on laughing gas, sweet. I plan on juicing the hell out of my motor whenever the time comes around to replace it... 150 shot??
Eric
3geez member since October 12, 2000
"All this worldly wisdom was once the unamiable heresy of some wise man." - Henry David Thoreau
why is 15.4 hard to believe with juice. i think its believable. however sad that we need n20 to hit mid 15's lol.. but thats not our fault.
15.4's on n2o is totally believeable.
A friend of mine is crazy smart when it comes to hondas. He put 120shot of N.O.S. on a new civic SI with ONLY intake and exhaust and he got it into the low 13's just by tuning the car for a day.......
Nothin' 2 Old Racing
damn if you have good driving and a 75 or 100 shot youll be in 14s
429whp 362wtq A20 TURBO. A20T>*
I don't think u have done to much research on wet systyms or u would not say that I run 75 wet NX I have gone through alot of bottles and no proplems yet.In stead of saying bye bye to his motor he will be saying it to you when ur seeing his tails.Originally posted by kroy
Thats funny. A 15.4 with juice. I have so many friends who would get a kick out of that one. Oh yea, say bye bye to your motor. It will not last much longer.
Stop bench racing and pick up a wrench
I know my spelling sucks and I suck with computers deal with it.
if your racing some one .. and you spray on em' .. can they hear the evidence of n2o ? ? ?
- J u n i o r -
Originally Posted by 89ACCORDVTECH
No They will not here it.
Stop bench racing and pick up a wrench
I know my spelling sucks and I suck with computers deal with it.
ahh where is the fishstick when you need it?
Last edited by k-roy; 11-10-2003 at 07:45 PM.
------------------
He is only running a 50 shot.
Stop bench racing and pick up a wrench
I know my spelling sucks and I suck with computers deal with it.
My car is capable of hitting 15's driving wise I suck ass and my reaction times are slow but that is the only thing keeping me out. Me and Matt marked off some 1/4 miles and run them to get an estimate speed. I get going about 88-90mph everytime. Look at Kevin's times 16.2@84mph.Originally posted by bobafett
why is 15.4 hard to believe with juice. i think its believable. however sad that we need n20 to hit mid 15's lol.. but thats not our fault.
I'm your local R&D nut. Fabracting, welding, tuning and breaking my stuff so you don't have to.
easy killer, trying to tear this guy apart here
we're talking about an 87 accord not a ferrari
his engine has 246,000 miles......thats miles man. thats frigen good if hes running 15.4's, i wish my car ran 15.4
thats sweet man our engines are strong IMO if it can handle that with that much mileage.
even if the engine does go its not like its an expensive motor to replace anyways
its not how fast you go, its how fast you get going.
He has some good compression with low blow-by for those numbers on his aging engine. Good job bro! Be careful though.
natsugusa ya
tsuwamono domo ga
yume no ato
yeah man thats good keep going
i want n20 now...
its not how fast you go, its how fast you get going.
Well the man for the hook up is NXRacer. Caleb I still want to buy a kit from you just need to save to money up again!
I'm your local R&D nut. Fabracting, welding, tuning and breaking my stuff so you don't have to.
and how much for this .. whatchamacallit .. wet stuff ?
- J u n i o r -
A 10lb bottle is around $560, then extras, bottle oponer and bottle heater with little stuff is about $300 I think.
I'm your local R&D nut. Fabracting, welding, tuning and breaking my stuff so you don't have to.
[homer]mmmm gold plated bottle [/homer]Originally posted by Justin86
A 10lb bottle is around $560, then extras, bottle oponer and bottle heater with little stuff is about $300 I think.
3rd Gen Accord Shirts and Stuff
Some of my Drawings
85 IROC Z28,TPI 355ci,700r4, 9.4:1 Aluminum pistons, COMP CAMS street/strip hyd roller cam, HYE TECH ported/polished heads, HOOKER Longtubes, Full 3 inch exaust NO Cat, TPIS alum fuel pressure reg, ACCEL distributor, custom programed chip from Performance Resource, Competition Engineering shocks. 10/90 front 50/50 back. Eibach drag springs up front. Auburn posi. SLP cold air induction and airfoil.batt relocated w/ kill switch.Still on street tires (Kuhmos all around)SOLD
87 IROC Z28, TPI 350ci, 700R4, 3.42 Posi, 4 wheel disk, Completely Stock (Wrecked)
1987 LXi 2.0 auto
WOW! Liquid Schwartz!!!Originally posted by Dustin Imports
[homer]mmmm gold plated bottle [/homer]
My collection: Stay tuned! (04/02/2009)
:lolOriginally posted by Sabz5150
WOW! Liquid Schwartz!!!
I love that movie.
lmfo ok i dont liek not belive the time but if a 99 s-10 xtreme wit full exhaust, cold air intake, mass airflow sensor and a hyper tech upgrade can only fun 15.5 wit a 50 shot nos i dont believe at all and also nos cant be heard but when u suddenly leave the person or gain speed suddenly th
they will know
i have not only owned my 89 accord
i had a 99 z24, turbo charged full engine enhancements( boring new cam bottom end pistons ect...) and a 150 shot wit intercooler and so on and so forth max speed 178 and quarter was 10.025 on street tires ( thats my best ) avg time was 10.54
on drags i ran a 9.4 best time avg was like i think a 9.6 not sure though but i know it was a 9 on my drags so i know deffinetly if this accord wit that many miles unless the engine has been fucked wit is not runnin a 15.4 lmfao name his other upgrades to make it believable
"No one knows my struggle, They only see the trouble, Not knowing its hard to carry on when no one loves u" -Tupac
Posting Permissions
Reply With Quote
Bookmarks