I know all about Justin making them and I have used the search button. I read a post a while back where some guy was able to amke one out of two different rear strut bars. He even had a pic but i cant find that thread anywhere. Does anyone know what two combinations can make a rear strut bar, or does anyone have a link to that thread. it was WAY back when
I found the post running a search, "strut bars" and not just in one post. He never did a rear bar, it was a front bar, his method might not work for the rear.
https://www.3geez.com/showthread.php?s=&threadid=4818
88turboaccord did the rear strut bars. I have one
Yea I could use a rear strut bar.
I'm your local R&D nut. Fabracting, welding, tuning and breaking my stuff so you don't have to.
Hope this works. I got this image from 88turboaccord. But if he has any problems of me posting this pic of his car I will get a pic of my rear strut bar for you. I will also get the thread link for you and then you can EMAIL him b/c he will most likely check that first.
Here's the link to the thread with all the info you should need.
Last edited by Mike's89AccordLX; 05-09-2003 at 07:15 PM.
Sweet.
I'm your local R&D nut. Fabracting, welding, tuning and breaking my stuff so you don't have to.
Im currently working on a rear strut bar i got the mixture of two years for 40 bucks. i know the mounts are from an 94-97 prelude but the bar i dont know the mounts line up but have to cut the end to make room. the only prob i might have is the rear seats being able to close right but f*&^$ it. Keep u posted
Sweet let me know how it goes. I'm curious.
Does it fit in there with the back seat in normal position and all or does it need to be flipped down?Originally posted by Mike's89AccordLX
88turboaccord did the rear strut bars. I have one
Well if you get it too work and the seat will shut all the way it will be sweet.
I'm your local R&D nut. Fabracting, welding, tuning and breaking my stuff so you don't have to.
why would u need a rear strut bar for? Do you have any suspension components?
Im trying to make my friend do one for me in our college machine shop. And while he does that, i might do the lower tie bar.
Well I have Koni's and Dropzones lowered 2" in the rear and 2.5" in the front. I have front strut bar that is suppose to fit but doesn't.Originally posted by smufguy
why would u need a rear strut bar for? Do you have any suspension components?
Im trying to make my friend do one for me in our college machine shop. And while he does that, i might do the lower tie bar.
I'm your local R&D nut. Fabracting, welding, tuning and breaking my stuff so you don't have to.
It's supposed to stiffen the chassis so you will be able to handle corners better. I have a front and rear strut bar and no other suspension items and my car does great corners. If you have any other suspension items then you should get front and back bars b/c you will enjoy them
thats awsome. Dude, I wanted to make sure u were not one of those guys buying stuff for fun. Cuz if u were, i would have to make fun of ya
But yeah, Suspension rocks, esp if its good
the rear strut bar that 88turboaccord made fits with the back seat in the normal position.Originally posted by thegreatdane
Does it fit in there with the back seat in normal position and all or does it need to be flipped down?
i have a DX with the non-folding rear seats and a bar flush across the middle with the backseat. i was hestitant on buying the bar at first b/c of fitment issues, but its fine. no problem at all.
Where the hell can we get one. Or at least instructions on how to make our own?
17"enkei cdr 9 with falcon tires
dropped to the ground
k@n inhale and flowmaster exhale
Hey guys me and my girl finished installing the rear strut bar it fits great the clearence for the rear seats are good too.Btw i have tokicos wit ground controls coilovers and some sway bars on tthe way. If u guys have any q,s ill let u know just pm me.
Cool so what parts did you use for it?Originally posted by Bk89Lx
Hey guys me and my girl finished installing the rear strut bar it fits great the clearence for the rear seats are good too.Btw i have tokicos wit ground controls coilovers and some sway bars on tthe way. If u guys have any q,s ill let u know just pm me.
I'm your local R&D nut. Fabracting, welding, tuning and breaking my stuff so you don't have to.
i know it was 94-97 prelude mounts but the 94-97 accord
mounts also fit for a fact the center bar is unknow for now but i will let u know
" Im just an unknow tuner in the city" LAB TECHNOLOGY
Well figure it out and try to get some pics too.Originally posted by Bronx89lx
i know it was 94-97 prelude mounts but the 94-97 accord
mounts also fit for a fact the center bar is unknow for now but i will let u know
" Im just an unknow tuner in the city" LAB TECHNOLOGY
I'm your local R&D nut. Fabracting, welding, tuning and breaking my stuff so you don't have to.
Please tell us what parts you used. please,please,please!!!
17"enkei cdr 9 with falcon tires
dropped to the ground
k@n inhale and flowmaster exhale
I think it is safe to now call you a tease!
17"enkei cdr 9 with falcon tires
dropped to the ground
k@n inhale and flowmaster exhale
I will agree wiht that.Originally posted by 88fasthatch
I think it is safe to now call you a tease!
I'm your local R&D nut. Fabracting, welding, tuning and breaking my stuff so you don't have to.
this weekend im going to take a trip back to the spot in queens where i got the brace. been working alot so havent had time to go to queens.If i dont post it then my wife will she will tell u the details.
cool, so where did you get the parts at.
I'm your local R&D nut. Fabracting, welding, tuning and breaking my stuff so you don't have to.
Posting Permissions
Reply With Quote
Bookmarks