I thought this was pretty neat. hope you like.
I thought this was pretty neat. hope you like.
WTB: 4th and 5th gen OEM headlights and corners in good shape. Even single lights.
1995 Honda Accord EX-R | 1988 Honda Accord EX-i | 1987 Honda Accord LX (R.I.P.)
damn, that looks pritty good. i bet that is a bad ass road racer.
"Eat, Drink, and be Merry!"
more weight reduction
i bet thats the 10th time someone has posted that car
Travis
www.cardomain.com/id/dxhatchback
Where did you find it?
- llia
Those rims make it look BMW. But I don't know...it's just not my type of eye candy.
That's got to be the cleanest living DX I've ever seen.
-Strugglebucket
Wow, that's absolutely amazing-that car does not look like it's 20 years old!
-redaztec
DAYUM!
-2ndGenGuy
...it looks like it came out straight from japan.
-MessyHonda
it was only on eBay last week or so...
someone has more pics of it?
WTB: 4th and 5th gen OEM headlights and corners in good shape. Even single lights.
1995 Honda Accord EX-R | 1988 Honda Accord EX-i | 1987 Honda Accord LX (R.I.P.)
I doubt it...
But iff there is a thread then whoever saw it should post a link here.
anyways I have a lot of respect for people with rollcages and Hoosier tire decals on the side of the car.
- llia
he probably chose them because they were cheap and light. 18" chrome wheels are not the ideal choice when racing.Originally posted by MIK3_DX_STYLE
Those rims make it look BMW. But I don't know...it's just not my type of eye candy.
That guy is my shop teacher. It's nothing too special...Costume cold air intake and headers. That is about it. Oh...lots of suspension work. The season is over for racing for him. Yeah...it is funny cause I asked him for the pictures today to post....but I've see that someone already has them. Anyways...is from Colorado. I'm goin' to find out more about the car...and will post more pictures of his car.
I eat rice, I drive rice!
SWEET! You gotta have your shop teaher join 3GEEZ. This way we'll learn his suspension tricks and maybe he'll get some ideas about performance. Either way, it'll be a little more incentive for him to keep it rather then sell it as he tried already via eBay.Originally posted by 89HatchAzn
That guy is my shop teacher. It's nothing too special...Costume cold air intake and headers. That is about it. Oh...lots of suspension work. The season is over for racing for him. Yeah...it is funny cause I asked him for the pictures today to post....but I've see that someone already has them. Anyways...is from Colorado. I'm goin' to find out more about the car...and will post more pictures of his car.
-Mark D.
He's got an oil cooler and filter relocation kit which is useful...
- llia
Originally posted by markmdz89hatch
SWEET! You gotta have your shop teaher join 3GEEZ. This way we'll learn his suspension tricks and maybe he'll get some ideas about performance. Either way, it'll be a little more incentive for him to keep it rather then sell it as he tried already via eBay.I bet he could teach us a thing or 2 about a thing or 2
colorado eh?
Aaron
My spelling was never a streingth...
hmm, those do look like BMW rims. like off the 3 series. i saw 2 pairs of those at the junkyard. now that i see they look pretty cool on the 3gee, i maybe go get them. if my tiny center cap or dust cap thing would fit that hole. and gotta see the offset and other stuff. im trying to find another 3gee for realy cheap here. i wanna make it raced out looking. like have a whole theme to it, like a castrol accord. maybe in silver, with some nice graphics on the windows and on the car clear coated. that would be cool. kinda got the idea from a supra from one of my games.
Keep it HONDA. Or at least Asian.™
*Weber 32/36*Pacesetter Header*2.25 in. Cat Back exhaust*SE-i rear disk brakes
B18C swap ditched, A20 to be revived
Looking for K20/trans for ultimate swap
Cool hatch, i guess. But one question. Why all that cage work and suspension if I only see a custome CAI and headers. I had that on my Sei and it wasn't that fast for the need of a Roll cage.
Maurice
I just joined 3Geez after hearing that my car was on the web-site from one of my students. It is built for SCCA IT rules. I ran two races this year in ITB and then the SCCA inspectors found I should have been in ITA. Oh-well, I actually placed higher in ITA in my last race losing only to a Acura Intergra that is quick and is the Colorado/Rocky Mtn. Champion. The car does OK in performance, but I am looking for some internal engine hope-up parts. I am also looking to install a lower final drive ratio, closer gear spacing and a better limited slip differential. I have fun with the spec Miata's and the BMW's
The car has inverted coil-overs, larger anti-roll bars and a camber kit. The cage, seat & 5-point belts are SCCA required. I run the BMW wheels, good, light, inexpensive and are 6" wide.
This is the first Honda ever owned and I am impressed at how tough these cars are especially diving into a turn at 80-85 mph, jumping on the brakes and powering out. I don't passed in the turns unless it is a high dollar car that is in a different class.
Any leads with the engine and trans parts would be appreciated.
Thanks for your help;
ITracer
ITR,
First, WELCOME TO THE BOARD. If you check out the technical, and performance sections, you'll see how endless the possibilities really are for your car. To extract just a little more power out of the car without opening up the engine, you could do a few little things. Ignition system (ignition, coil, plugs, wires, etc.), tweaking the timing a little, possibly a metal CAI rather then the corugated one currently on there. Not too sure of all mods that you already have, but there's always more to be done. Def. also check out the EFI TEch section in the Technical forum, and you'll find all sorts of tweaking goodies.
Once again, welcome, and please feel free to stay a while. Your car has been the envy of a number of members here.
-Mark D.
the 86-87 Prelude si's tranny will bolt right up to your motor and have slightly shorter gearing.
The gears from a 86-89 integra will wok in the Accord tranny and have shorter gears than the prelude.
As far as internals....all I can think of is a p&p head and higher comp pistons, camshaft and such.
I'm pretty sure you're limited to do certain things in certain classes though.
The special coilovers he's runnning have been discontinued, OPMmotorsports used to carry them.Originally posted by markmdz89hatch
SWEET! You gotta have your shop teaher join 3GEEZ. This way we'll learn his suspension tricks and maybe he'll get some ideas about performance. Either way, it'll be a little more incentive for him to keep it rather then sell it as he tried already via eBay.
Am curious what larger sway bar's he's running, Suspension Technique's, Addco, Custom Sanner prefab unit's or someone else's custom bend?
H&R springs revalved Bilstein front struts, koni struts in the rear 195/55-15 Dunlop W-10's Dc Sports header custom cat-back with Dynomax super turbo w/3" Brembo slotted & dimpled rotor's EBC pads
Well, that's what I used to have, wrecked, 7/3/02.
Now I d
wonder what kind of internals that car has...?
Any leads with the engine and trans parts would be appreciated.
ITracer [/B][/QUOTE]
Talk to sean, he has the hookup on forged higher compression pistons and eagle rods. As for a lsd you can use an early Integra tranny with an aftermarket lsd. Check out the howto section.
------------------
wow nice car...I am hoping to have my car track ready one day but its the daily driver for now...what kind of limits does does the ITA class have on horsepower,weight etc.?
If turbos are ITA / SCCA legal, you should go that route, I believe Sean (thats his user name too) is making A20 turbo kits and DIS kits now, you should talk to him about upgrading turbo or not. good luck!
- Matt
I wonder if his DIS System would help for this application? maybe Able to tweek the Spark timming Easyer and stuff? i dont know. but hell yah! TURBO! then no one can touch you.
1992 Tsi AWD
Status: Fixed.
WANTED ANY 3GEE IN FL!
Posting Permissions
Reply With Quote
Bookmarks