Alternatives for OEM Honda Parts?

[it's paid for]

Before I get my engine back together, I'm going to need the following parts, which, I'm guessing can only be obtained from a Honda dealership:

• Carburetor gasket
• Lower timing belt cover
• At least two cylinder head bolts
• Crankcase timing indicator hole plug (for lack of a better name)

Am I stuck with going to a Honda dealership for all this stuff, or is there a reliable, economical alternative. I haven't found one, in fact, one parts store told me I had no choice, that only the Honda dealership would have these items, or could order them. I don't like that.

All the "usual" stuff I can get from my local parts place - timing belt, spark plugs, distributor cap, et cetera.

Thanks very much,

IPF

[k-roy]

Dude. Replace all the head bolts.
The carb gasket can be foud easily
as for the rest go to the dealership. Or Majestic Honda, they are a good dealer on the net.

[A20A1]

If you are good with an exacto knife then you can cut out your own gaskets... but the one gasket that I don't recommed making yourself is the gasket between the carb body and the carb top-hat.

Damn my engine never had the flywheel timing hole cover.

[cruznz]

......or get some gasket paper and make your own,get the other bits from the j/y