Lightweight Aluminum flywheel

[K-MOD]

Need a flywheel for your 86-89 Accord, K-Modified Racing has them for $315. They weigh 11-12lbs and are made of 6061-T6 heat treated aluminum plate. The friction plate is made from durable 1050 steel and has aircraft quality retaining bolts. These flywheels are custom made per order. None in stock, one week wait. Six puck sprung hub clutches also avail. ($325) Very steetable and holds alot of power. For info or ordering [email protected]


http[IMG]://www.clutchnet.com/make/_derived/prodDesc.html_txt_C12D.gif[/IMG]

[K-MOD]

Sorry I put up the wrong picture, here is the right one

[IMG] http://www.clutchnet.com/make/C9D.gif[/IMG]

[K-MOD]

Here is a picture of the flywheel($315)

[mykwikcoupe]

can you make one for the JDM B20A? Will it be the same price? I have chosen to go with larger rims so I need to make up as much weight in rotational mass as possible. Do you need my original? If you need more info there is a post in the engine swaps going right now. Very similar to B20A5 I guess. Also I am using an act clutch from a lude, did you need my pressure plate to make sure of exact fit? Thanks Mike

[K-MOD]

If the flywheel is the same as a B20A5 then no problem. As far as exact fit goes, we have made flywheels for the 88-91 prelude before, so if its the same then there is no problem. Find out what USDM parts are the same and we will make you a flywheel. Same price.
http://209.151.81.66/showthread.php?s=&threadid=5907

[RobT5580]

There is a difference between the 88-91 B20A5. The 88-89 is 210mm and the 90-91 is 220mm so it makes a big difference which one you sell the people with the prelude.

[K-MOD]

Just let me know which flyweel you want to use the 88-89 or the 90-91. Thanks ROB5580.

[Gregg86DX]

K-Mod, if we find that the B20A flywheel is close, but differs slightly from a USDM model, would they be able to build one to a modified spec?

Gregg

[AccordEpicenter]

how much torque will the 6 puck hold?

[mykwikcoupe]

6 puck is only for racing applications. Id hate to have to feel that more thana few times. If your drivinf the car around town dont get the 6 puck.

[K-MOD]

I've got that six puck in my car right now, I drive it everyday. This is a really streetable clutch. It's a little more grabby than stock when your trying to creep, but when you drop the clutch it grabs and holds. 13.8@103 A20 w/100 shot. This clutch is sprung which takes up alot of the shock you usually get w/ a six puck.
I sell these all the time, no complaints.

[mykwikcoupe]

cool then i would like to take this opportunity to retract my former statement.