Results 1 to 23 of 23

Thread: ACCORD SHIRTS and MORE for XMAS

  1. #1
    LX User Dustin Imports's Avatar
    Join Date
    Oct 2003
    Vehicle
    1987 LXi
    Location
    Detroit Motor City, Orlando Land of Rice
    Posts
    488

    ACCORD SHIRTS and MORE for XMAS

    Get em' now. tell yer family and friends to order now for the Holidays.
    Shirts, Stickers, Ornaments and more

    Custom work availible.

    GET THEM HERE
    3rd Gen Accord Shirts and Stuff
    Some of my Drawings
    85 IROC Z28,TPI 355ci,700r4, 9.4:1 Aluminum pistons, COMP CAMS street/strip hyd roller cam, HYE TECH ported/polished heads, HOOKER Longtubes, Full 3 inch exaust NO Cat, TPIS alum fuel pressure reg, ACCEL distributor, custom programed chip from Performance Resource, Competition Engineering shocks. 10/90 front 50/50 back. Eibach drag springs up front. Auburn posi. SLP cold air induction and airfoil.batt relocated w/ kill switch.Still on street tires (Kuhmos all around)SOLD
    87 IROC Z28, TPI 350ci, 700R4, 3.42 Posi, 4 wheel disk, Completely Stock (Wrecked)

    1987 LXi 2.0 auto



  2. #2


    Join Date
    Jul 2002
    Vehicle
    a pile of lawn ornaments
    Location
    Newtown, CT
    Posts
    5,783
    Any chance I can get the A20A1 shirt without the orlandodawn on the back?

    How much for it?
    -Mark D.


  3. #3
    3Geez Veteran 88LXi68's Avatar
    Join Date
    Oct 2000
    Vehicle
    '88 Accord LX-i
    Location
    Connecticut
    Posts
    4,120
    You dont have an A20A1 anymore fool!
    '88 LX-i Coupe --- LS/Vtec
    '08 Accord EX-L 6-6 --- Daily Duty

  4. #4


    Join Date
    Jul 2002
    Vehicle
    a pile of lawn ornaments
    Location
    Newtown, CT
    Posts
    5,783
    Originally posted by 88LXi68
    You dont have an A20A1 anymore fool!
    Shhhh.... that's not a known fact yet.

    Nah, actually, I'm just retarted. ...but wait, yes I do still have an A1 (it's just in the beater-G rather then the one that counts.)
    -Mark D.


  5. #5
    3Geez Veteran 88LXi68's Avatar
    Join Date
    Oct 2000
    Vehicle
    '88 Accord LX-i
    Location
    Connecticut
    Posts
    4,120
    I thought the A20A1 and A20A3 shirts are cool. Too bad I dont have either anymore.

    BTW Mark, what did you think about the car?
    '88 LX-i Coupe --- LS/Vtec
    '08 Accord EX-L 6-6 --- Daily Duty

  6. #6
    LX User Dustin Imports's Avatar
    Join Date
    Oct 2003
    Vehicle
    1987 LXi
    Location
    Detroit Motor City, Orlando Land of Rice
    Posts
    488
    I can remove Orlando dawn..if peeps are serious.

    Drew
    3rd Gen Accord Shirts and Stuff
    Some of my Drawings
    85 IROC Z28,TPI 355ci,700r4, 9.4:1 Aluminum pistons, COMP CAMS street/strip hyd roller cam, HYE TECH ported/polished heads, HOOKER Longtubes, Full 3 inch exaust NO Cat, TPIS alum fuel pressure reg, ACCEL distributor, custom programed chip from Performance Resource, Competition Engineering shocks. 10/90 front 50/50 back. Eibach drag springs up front. Auburn posi. SLP cold air induction and airfoil.batt relocated w/ kill switch.Still on street tires (Kuhmos all around)SOLD
    87 IROC Z28, TPI 350ci, 700R4, 3.42 Posi, 4 wheel disk, Completely Stock (Wrecked)

    1987 LXi 2.0 auto

  7. #7
    LX User Dustin Imports's Avatar
    Join Date
    Oct 2003
    Vehicle
    1987 LXi
    Location
    Detroit Motor City, Orlando Land of Rice
    Posts
    488
    also need ideas of stuff you'd like. hit me up w/ some stuff you want

    Drew
    3rd Gen Accord Shirts and Stuff
    Some of my Drawings
    85 IROC Z28,TPI 355ci,700r4, 9.4:1 Aluminum pistons, COMP CAMS street/strip hyd roller cam, HYE TECH ported/polished heads, HOOKER Longtubes, Full 3 inch exaust NO Cat, TPIS alum fuel pressure reg, ACCEL distributor, custom programed chip from Performance Resource, Competition Engineering shocks. 10/90 front 50/50 back. Eibach drag springs up front. Auburn posi. SLP cold air induction and airfoil.batt relocated w/ kill switch.Still on street tires (Kuhmos all around)SOLD
    87 IROC Z28, TPI 350ci, 700R4, 3.42 Posi, 4 wheel disk, Completely Stock (Wrecked)

    1987 LXi 2.0 auto

  8. #8
    3Geez Veteran 88LXi68's Avatar
    Join Date
    Oct 2000
    Vehicle
    '88 Accord LX-i
    Location
    Connecticut
    Posts
    4,120
    Can you do a coupe but without the dude coming through the roof? With 3geez.com on the back
    '88 LX-i Coupe --- LS/Vtec
    '08 Accord EX-L 6-6 --- Daily Duty

  9. #9
    LX User Dustin Imports's Avatar
    Join Date
    Oct 2003
    Vehicle
    1987 LXi
    Location
    Detroit Motor City, Orlando Land of Rice
    Posts
    488
    Originally posted by 88LXi68
    Can you do a coupe but without the dude coming through the roof? With 3geez.com on the back
    Im prob going to remove the dude..no one lieks em lol

    I dont know about puttin 3geez on it though..may get in trouble
    3rd Gen Accord Shirts and Stuff
    Some of my Drawings
    85 IROC Z28,TPI 355ci,700r4, 9.4:1 Aluminum pistons, COMP CAMS street/strip hyd roller cam, HYE TECH ported/polished heads, HOOKER Longtubes, Full 3 inch exaust NO Cat, TPIS alum fuel pressure reg, ACCEL distributor, custom programed chip from Performance Resource, Competition Engineering shocks. 10/90 front 50/50 back. Eibach drag springs up front. Auburn posi. SLP cold air induction and airfoil.batt relocated w/ kill switch.Still on street tires (Kuhmos all around)SOLD
    87 IROC Z28, TPI 350ci, 700R4, 3.42 Posi, 4 wheel disk, Completely Stock (Wrecked)

    1987 LXi 2.0 auto

  10. #10

    SiR's Avatar
    Join Date
    Jul 2002
    Vehicle
    87 Accord LX
    Location
    Fort Lauderdale, Florida
    Posts
    1,369
    If you can get the black 4 door car without the guy, and having the A20A1 thing on the back of those shirts, i'll buy it for sure, people here know i will.

    See if you can get the 3geez.com on your shirts, i know they will let you if you ask.
    Rooz
    That's my other "car" on the avatar, my Dash-8

  11. #11
    SEi User Dibbs's Avatar
    Join Date
    May 2003
    Vehicle
    '86 LX-i Hatch
    Location
    Houston
    Posts
    1,698
    Dustin, I am SOOOO into you making a 3rd gen lunchbox for my oldest to take to school. That's an all metal box right? Does it come w/ a thermos?
    Quote Originally Posted by kroy
    Mad props to you if you can pull it off, you can change your name to slowassoldschoolswap :thumbdown

  12. #12
    LX User Dustin Imports's Avatar
    Join Date
    Oct 2003
    Vehicle
    1987 LXi
    Location
    Detroit Motor City, Orlando Land of Rice
    Posts
    488
    doesnt look like a thermos comes with them...

    I can still make...what design?
    3rd Gen Accord Shirts and Stuff
    Some of my Drawings
    85 IROC Z28,TPI 355ci,700r4, 9.4:1 Aluminum pistons, COMP CAMS street/strip hyd roller cam, HYE TECH ported/polished heads, HOOKER Longtubes, Full 3 inch exaust NO Cat, TPIS alum fuel pressure reg, ACCEL distributor, custom programed chip from Performance Resource, Competition Engineering shocks. 10/90 front 50/50 back. Eibach drag springs up front. Auburn posi. SLP cold air induction and airfoil.batt relocated w/ kill switch.Still on street tires (Kuhmos all around)SOLD
    87 IROC Z28, TPI 350ci, 700R4, 3.42 Posi, 4 wheel disk, Completely Stock (Wrecked)

    1987 LXi 2.0 auto

  13. #13
    LX User Dustin Imports's Avatar
    Join Date
    Oct 2003
    Vehicle
    1987 LXi
    Location
    Detroit Motor City, Orlando Land of Rice
    Posts
    488
    let me know aht you guys want on shirts n stuff..like car pics..certain sayings.

    I was going to make a general "3rd gen accord" for the back/front opposite the pic
    3rd Gen Accord Shirts and Stuff
    Some of my Drawings
    85 IROC Z28,TPI 355ci,700r4, 9.4:1 Aluminum pistons, COMP CAMS street/strip hyd roller cam, HYE TECH ported/polished heads, HOOKER Longtubes, Full 3 inch exaust NO Cat, TPIS alum fuel pressure reg, ACCEL distributor, custom programed chip from Performance Resource, Competition Engineering shocks. 10/90 front 50/50 back. Eibach drag springs up front. Auburn posi. SLP cold air induction and airfoil.batt relocated w/ kill switch.Still on street tires (Kuhmos all around)SOLD
    87 IROC Z28, TPI 350ci, 700R4, 3.42 Posi, 4 wheel disk, Completely Stock (Wrecked)

    1987 LXi 2.0 auto

  14. #14
    LXi User Dennis's Avatar
    Join Date
    Dec 2003
    Vehicle
    88 Honda Accord LX, 96 Kia Sephia RS
    Location
    Kentucky
    Posts
    571
    Sorry but those shirts are ugly... and expensive... plus you'd be better off buying white shirts in bulk and getting your drawings printed on there, cafeshops.com sucks. You'll save and make money... at the same time.


  15. #15
    SEi User Dibbs's Avatar
    Join Date
    May 2003
    Vehicle
    '86 LX-i Hatch
    Location
    Houston
    Posts
    1,698
    Dennis I hope you're not talking about iron ons

    It's really not that easy to just go to a screen printer w/ some white shirts and say "here....screenprint this drawing" There's set-up fees and extra costs for printing front and back, naturally. Dustin is being amazingly flexible w/ the options available to the 3Geez members. Plus, $20 for shirts that are virtually custom made are not that expensive in my mind. The issue of how they look is purely subjective, I'm sure some people like them and others don't, but then again I point to Dustin's flexibility on design especially since he's the one that created these drawings. Most artists are deadset against compromising their art for anyone. If you can create drawings of that caliber and duplicate the same quality at a lower price, w/ the same flexibility of selection and customization, then more power to you. But until that day comes, I think I'll stick w/ what Dustin has to offer, instead of hoping something cheaper will come along oner day.
    Quote Originally Posted by kroy
    Mad props to you if you can pull it off, you can change your name to slowassoldschoolswap :thumbdown

  16. #16
    LX User Dustin Imports's Avatar
    Join Date
    Oct 2003
    Vehicle
    1987 LXi
    Location
    Detroit Motor City, Orlando Land of Rice
    Posts
    488
    Originally posted by Dennis
    Sorry but those shirts are ugly... and expensive... plus you'd be better off buying white shirts in bulk and getting your drawings printed on there, cafeshops.com sucks. You'll save and make money... at the same time.




    Man your Super Cool! Wow you know it all, Ill make sure to ask you what you think because your opinion means so much to me!
    Thanks I apreciate it.

    Well someones buying them, maybe not your poor ass, but someone is.

    cafepress.com

    you get webspace, design a site, choose from nearly a hundered different itesm to customize with your own design, they provide order and salses reports, they help advertise, you need no money to start or even maintain the site, the take orders, and except every form of payment, they ship and insure all items, and cut me check each month.

    Yea I guess they do suck.
    Last edited by Dustin Imports; 12-16-2003 at 07:42 AM.
    3rd Gen Accord Shirts and Stuff
    Some of my Drawings
    85 IROC Z28,TPI 355ci,700r4, 9.4:1 Aluminum pistons, COMP CAMS street/strip hyd roller cam, HYE TECH ported/polished heads, HOOKER Longtubes, Full 3 inch exaust NO Cat, TPIS alum fuel pressure reg, ACCEL distributor, custom programed chip from Performance Resource, Competition Engineering shocks. 10/90 front 50/50 back. Eibach drag springs up front. Auburn posi. SLP cold air induction and airfoil.batt relocated w/ kill switch.Still on street tires (Kuhmos all around)SOLD
    87 IROC Z28, TPI 350ci, 700R4, 3.42 Posi, 4 wheel disk, Completely Stock (Wrecked)

    1987 LXi 2.0 auto

  17. #17
    LX User Dustin Imports's Avatar
    Join Date
    Oct 2003
    Vehicle
    1987 LXi
    Location
    Detroit Motor City, Orlando Land of Rice
    Posts
    488
    Ugly lol...


    isnt there an age limit on this site?
    3rd Gen Accord Shirts and Stuff
    Some of my Drawings
    85 IROC Z28,TPI 355ci,700r4, 9.4:1 Aluminum pistons, COMP CAMS street/strip hyd roller cam, HYE TECH ported/polished heads, HOOKER Longtubes, Full 3 inch exaust NO Cat, TPIS alum fuel pressure reg, ACCEL distributor, custom programed chip from Performance Resource, Competition Engineering shocks. 10/90 front 50/50 back. Eibach drag springs up front. Auburn posi. SLP cold air induction and airfoil.batt relocated w/ kill switch.Still on street tires (Kuhmos all around)SOLD
    87 IROC Z28, TPI 350ci, 700R4, 3.42 Posi, 4 wheel disk, Completely Stock (Wrecked)

    1987 LXi 2.0 auto

  18. #18


    Join Date
    Jul 2002
    Vehicle
    a pile of lawn ornaments
    Location
    Newtown, CT
    Posts
    5,783
    Hey Dustin, I've got a couple of pen & inks that I've done of the 3G. If you'd like I can send 'em your way. I'm normally not too big on handing out my drawings, but for this I'll consider.

    Let me know if you're looking for designs, and what you're looking for. If I don't already have it drawn up, I'll be happy to "go back to the drawing board" to contribute.

    Also, if you're looking for low res pictures, I'm sure I can help out in that department too.

    How many colors are you willing to do for each design? I guess I should ask if you're silkscreening, or using another method to get the image to the shirt b/c I know that each color is a different screen which could potentially be a pain in the ass.

    Let me know.
    -Mark D.


  19. #19


    Join Date
    Jul 2002
    Vehicle
    a pile of lawn ornaments
    Location
    Newtown, CT
    Posts
    5,783
    forgot to ask. Do you only have white shirts, or do you have black, or colored as well?
    -Mark D.


  20. #20
    LX User Dustin Imports's Avatar
    Join Date
    Oct 2003
    Vehicle
    1987 LXi
    Location
    Detroit Motor City, Orlando Land of Rice
    Posts
    488
    white and gray, short sleeve, hoodies, jerseys, tank tops, girl shirts, kids shirts...you name it..

    except black.
    3rd Gen Accord Shirts and Stuff
    Some of my Drawings
    85 IROC Z28,TPI 355ci,700r4, 9.4:1 Aluminum pistons, COMP CAMS street/strip hyd roller cam, HYE TECH ported/polished heads, HOOKER Longtubes, Full 3 inch exaust NO Cat, TPIS alum fuel pressure reg, ACCEL distributor, custom programed chip from Performance Resource, Competition Engineering shocks. 10/90 front 50/50 back. Eibach drag springs up front. Auburn posi. SLP cold air induction and airfoil.batt relocated w/ kill switch.Still on street tires (Kuhmos all around)SOLD
    87 IROC Z28, TPI 350ci, 700R4, 3.42 Posi, 4 wheel disk, Completely Stock (Wrecked)

    1987 LXi 2.0 auto

  21. #21
    LX User Dustin Imports's Avatar
    Join Date
    Oct 2003
    Vehicle
    1987 LXi
    Location
    Detroit Motor City, Orlando Land of Rice
    Posts
    488
    I can do custom "anything" on whatever shirt or item someone might want (ask Dibbs)

    I dont know bout' using your designs (thanks for the offer) Im trying to keep everything of my designs for copywrite type reasons.

    but I am open to ideas and will work w/ anyone.

    Im even removing the guy from the accord shirts per request (Dibbs will own one of two with that guy in the accord)

    Drew
    3rd Gen Accord Shirts and Stuff
    Some of my Drawings
    85 IROC Z28,TPI 355ci,700r4, 9.4:1 Aluminum pistons, COMP CAMS street/strip hyd roller cam, HYE TECH ported/polished heads, HOOKER Longtubes, Full 3 inch exaust NO Cat, TPIS alum fuel pressure reg, ACCEL distributor, custom programed chip from Performance Resource, Competition Engineering shocks. 10/90 front 50/50 back. Eibach drag springs up front. Auburn posi. SLP cold air induction and airfoil.batt relocated w/ kill switch.Still on street tires (Kuhmos all around)SOLD
    87 IROC Z28, TPI 350ci, 700R4, 3.42 Posi, 4 wheel disk, Completely Stock (Wrecked)

    1987 LXi 2.0 auto

  22. #22
    SEi User
    Join Date
    Sep 2003
    Posts
    1,035
    you have these on ebay :lol if you could get the a20a1 barcode on the front with www.3geez.com on the back and then honda symbols on each sleeve i'll pay for a shirt, possibly a honda symbol on one side and a japanese flag on the other sleeve????/ just some cool idea's theres alot more idea's but i understand your worried about copyright laws, people are so sue happy i dont blame you!!!! :smokin:

  23. #23
    LX User Dustin Imports's Avatar
    Join Date
    Oct 2003
    Vehicle
    1987 LXi
    Location
    Detroit Motor City, Orlando Land of Rice
    Posts
    488
    actually just prints/color copys...where else can I sell something and advertise at the same time.

    plus only a doiller lol

    I cant do anything w/ sleeves..
    3rd Gen Accord Shirts and Stuff
    Some of my Drawings
    85 IROC Z28,TPI 355ci,700r4, 9.4:1 Aluminum pistons, COMP CAMS street/strip hyd roller cam, HYE TECH ported/polished heads, HOOKER Longtubes, Full 3 inch exaust NO Cat, TPIS alum fuel pressure reg, ACCEL distributor, custom programed chip from Performance Resource, Competition Engineering shocks. 10/90 front 50/50 back. Eibach drag springs up front. Auburn posi. SLP cold air induction and airfoil.batt relocated w/ kill switch.Still on street tires (Kuhmos all around)SOLD
    87 IROC Z28, TPI 350ci, 700R4, 3.42 Posi, 4 wheel disk, Completely Stock (Wrecked)

    1987 LXi 2.0 auto

Similar Threads

  1. xmas present
    By 85lude in forum Trading Post
    Replies: 15
    Last Post: 12-18-2003, 10:42 PM
  2. 3rd Gen Accord SHIRTS n STUFF.
    By Dustin Imports in forum Trading Post
    Replies: 31
    Last Post: 11-23-2003, 05:59 PM
  3. CD changer for Xmas
    By Coitis1 in forum Interior & Exterior Care
    Replies: 1
    Last Post: 12-23-2002, 04:35 AM
  4. its xmas time! how to make bass lights
    By staticpat in forum Interior & Exterior Care
    Replies: 6
    Last Post: 12-11-2002, 08:13 AM
  5. how to: xmas lites to blink with the bass
    By staticpat in forum Interior & Exterior Care
    Replies: 0
    Last Post: 12-09-2002, 05:33 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink