Results 1 to 13 of 13

Thread: Some Christmas Break Restoration

  1. #1

    MIK3's Avatar
    Join Date
    Jan 2003
    Vehicle
    1988 Accord DX
    Location
    Phoenix, AZ
    Posts
    2,255

    Some Christmas Break Restoration

    Well here's a list of what I plan on doing over my x-mas break. This car has never been through this big of a 'tune' up.

    -re done bumpers and clear coat them
    -re done door pannels and clear coat them
    -re done door window trim and clear coat them
    -re done rear and front window trim and clear coat them
    -new floor matts
    -new NGK V-power sparkplugs
    -new NGK spark plug wires
    -good exterior wash
    -good exterior wax
    -good interior vacuum
    -good interior viynl wipe down
    -degrease and detail engine with cleaners
    -flush and refill transmission fluid
    -try and find 2 replacement stock hub caps in junkyard

    After this. This car will be brand spaking new looking. I assure you. I'll post pics of it of course so you all can see my accomplishments. This probably doesn't seem like a lot to some of you, but as you know, I am planning on putting my accord back into 1988, fully stock looking. I can't wait. I have 2 weeks to accomplish the above list, think it'll happen? I hope so.

    That's got to be the cleanest living DX I've ever seen.
    -Strugglebucket
    Wow, that's absolutely amazing-that car does not look like it's 20 years old!
    -
    redaztec
    DAYUM!
    -
    2ndGenGuy
    ...it looks like it came out straight from japan.
    -
    MessyHonda



  2. #2

    Not like a rock's Avatar
    Join Date
    Jun 2003
    Vehicle
    86 EXi(sold), 89 SE-i auto, 89 SE-i 5spd
    Location
    Prince George, North BC, Canada
    Posts
    368
    Sounds do-able if you don't have to work. I wanted to get my car back up to stock during the break, but now I work every single day. The most I've managed to do in two months is paint my mud-guards.

    edit: oh look! I'm dx now.
    Perfection is simply a matter of replacing parts.

  3. #3

    MIK3's Avatar
    Join Date
    Jan 2003
    Vehicle
    1988 Accord DX
    Location
    Phoenix, AZ
    Posts
    2,255
    Yeah. I've re-done those twice. Repainted and made the HONDA part white. I can't wait to start. I have no job, so I have 2 weeks, and 14 full days.

    That's got to be the cleanest living DX I've ever seen.
    -Strugglebucket
    Wow, that's absolutely amazing-that car does not look like it's 20 years old!
    -
    redaztec
    DAYUM!
    -
    2ndGenGuy
    ...it looks like it came out straight from japan.
    -
    MessyHonda

  4. #4

    NXRacer's Avatar
    Join Date
    Dec 2002
    Vehicle
    86 LXi Hatch
    Location
    Tri-Cities, WA
    Posts
    6,557
    i find it hard to understand why you're so into making it totally stock looking but hey, its what you're into and thats cool. Show us some pics on your work. I may be convinced......
    Nothin' 2 Old Racing

  5. #5


    Join Date
    Dec 2002
    Posts
    6,009
    I am into the stock look myself. Redoing the window trim makes the car look brand new, I can assure you that. Every once in a while I have to recoat them, but it's no big deal. It's better than the rubber coating that was on there before. FYI, they sell a black rubber coat (like what was on there out of the factory) and it works much better, even though I didn't use it.

  6. #6
    LXi User shane_lxi's Avatar
    Join Date
    Dec 2003
    Vehicle
    '71 Datsun 521, '89 S13 Coupe, '90 S13 FB
    Location
    Hoquiam, WA
    Posts
    673
    It's cool if you are into stock. But IMO, I think you should stop at a Schwab's or someplace else that sells used wheels, and try to get stock '88 honda wheels. It won't look too great if you restore it to stock DX exterior, try to paint the bumpers the same color as the rest of the car, it will look better. Of course, it's not my place, but there's my input on hte matter.

  7. #7
    3Geez Veteran Mike89Accordcom's Avatar
    Join Date
    Jul 2000
    Vehicle
    89 Accord LXI - sold, 1996 TL - sold, now I have a 2003 Acura CL Type S
    Location
    WA State
    Posts
    7,589
    That will take a while, but good luck.

    Started with a 89 Accord LXI - 96 Acura TL - 2003 Acura CL Type S..

    my other site, www.brandonlee.com!

  8. #8

    Not like a rock's Avatar
    Join Date
    Jun 2003
    Vehicle
    86 EXi(sold), 89 SE-i auto, 89 SE-i 5spd
    Location
    Prince George, North BC, Canada
    Posts
    368
    I don't know about the rest of you, but when I said stock, I meant bringing it back from a less-than-stock (fender rust and beat up leather) state. The only redeeming feature on my car is the stock SE-i alloys. I don't know if they are the same for US and Canadian models.

    When I painted the mud guards, I didn't do them black, but painted them the same color as my car instead. So now they are taupe.
    Perfection is simply a matter of replacing parts.

  9. #9

    MIK3's Avatar
    Join Date
    Jan 2003
    Vehicle
    1988 Accord DX
    Location
    Phoenix, AZ
    Posts
    2,255
    Alright. Here's the deal as to why I am looking to fully make my car stock looking once again. I plan on having the car only a year or 2 more at the max. By that time, I will need to look for another car. And, since it'll only be a year or two, there is no use in spending all that money on wheels, bodykits, engine enhancements, and such. It will only add to the depreciation factor of the car when I sell it. Making it look stock, I figure I might be able to get a little bit more for the car, being that there aren't going to be too many mint looking 16 year old stock accords out there in AZ anyway. So I figure I make it look as good as I can, as cheap as I can, so that I can get the most for it when the time comes to sell it. This way, when I get my next car (possibly a newer accord), I will be able to put money into it and all of this, for I will keep it for more than 1 or 2 years. Some may thing I'm pretty stupid or something for doing this, but it's the plan I'm sticking with. And for me, it's a project that has to deal with a car. And any project that has to do with a car, is deemed worthy of being cool in my book. So for all my supporters, thanks, and my non-supporters, I hope you realize now why I am doing this...

    That's got to be the cleanest living DX I've ever seen.
    -Strugglebucket
    Wow, that's absolutely amazing-that car does not look like it's 20 years old!
    -
    redaztec
    DAYUM!
    -
    2ndGenGuy
    ...it looks like it came out straight from japan.
    -
    MessyHonda

  10. #10


    Join Date
    Dec 2002
    Posts
    6,009
    That's cool. Pretty much the same reason I am doing that to my car. I also enjoy having all my friends tell me how clean and good condition my car is in.

  11. #11

    MIK3's Avatar
    Join Date
    Jan 2003
    Vehicle
    1988 Accord DX
    Location
    Phoenix, AZ
    Posts
    2,255
    Yeah. That definately is a good payoff...I would have to agree there. I like the question, How do you do it? Haha.

    That's got to be the cleanest living DX I've ever seen.
    -Strugglebucket
    Wow, that's absolutely amazing-that car does not look like it's 20 years old!
    -
    redaztec
    DAYUM!
    -
    2ndGenGuy
    ...it looks like it came out straight from japan.
    -
    MessyHonda

  12. #12
    SEi User ICEMAN707's Avatar
    Join Date
    Jun 2003
    Vehicle
    1987 Honda Accord Lx-i Sedan (long term project)
    Location
    Kissimmee FL
    Posts
    1,375
    "how do you do it?"

    easy way is to pay honda alot of money to reassemble their old assembly plant and have you built another brand spanking new 3gee. :cool2:
    Last edited by ICEMAN707; 12-20-2003 at 11:09 PM.

  13. #13

    MIK3's Avatar
    Join Date
    Jan 2003
    Vehicle
    1988 Accord DX
    Location
    Phoenix, AZ
    Posts
    2,255
    And the cheap way would be my way, haha.

    That's got to be the cleanest living DX I've ever seen.
    -Strugglebucket
    Wow, that's absolutely amazing-that car does not look like it's 20 years old!
    -
    redaztec
    DAYUM!
    -
    2ndGenGuy
    ...it looks like it came out straight from japan.
    -
    MessyHonda

Similar Threads

  1. Replies: 4
    Last Post: 02-10-2013, 12:32 AM
  2. Restoration, when is it too late for a car?
    By stezie in forum Classic Honda Community Chat
    Replies: 4
    Last Post: 07-06-2011, 06:08 PM
  3. Merry Christmas to all!!!!!!!
    By hammer3rd in forum 3geez News & Site Feedback
    Replies: 12
    Last Post: 01-02-2010, 01:17 PM
  4. Heat gun restoration
    By nswst8 in forum Interior & Exterior Care
    Replies: 6
    Last Post: 12-27-2009, 09:35 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink