GRRRRRRR!!!!! Bad suspension.
Yeah, so i pulled up to a stoplight today and when i went, my lower ball joint fell off, kinda making my wheel look funny and stuff. After getting it towed, i dont know what to do. Anybody have this happen, is there a way to prevent it from happening again?
get a MOOG ball joint.. by far the best maker of suspension parts followed closely by Spicer... i have seen that happen too many times at werk... some guy was goin 40MPH and his lower fell off on his accord... scraped the bottom right off the BJ and ripped his month old CV shaft aprat... of course there was NO warentee cuz he chose to put a 15 dollar lower ball joint instaed of a 25 dollar MOOG... so now he's out a 70 dollar CV shaft, has to buy a new 25 dollar moog BJ and pay for all the labor again...
what you had was prbably a cheapo "white box" ball joint... get a nice one and throw it in her... make shur you grease it when you change your oil... check the other side and if its greaseable, maybe you should lube it up now before any more problems arise...
damn that was a huge post
Travis
www.cardomain.com/id/dxhatchback
I have a couple of Moog lower balljoints I could sell to you, They are not difficult to replace just time consuming. I just did my lower BallJoints along with some other needed maintance. Used TRWs with lifetime warranty.LOL
NSWST8
Yo, thanx guys. Could u give me a few links to suspension stuff, cause i know jack s@#*. Thanx
-K
'89 Accord LX
When she woke in the morning
She knew that her life had passed her by
And she called out a warning
Don't ever let life pass you by
~Incubus
"THE THIRST FOR SPEED IS NEVER QUENCHED"
Interesting. I found out that the NHTSA has a recall out on Moog ball joints for our cars: http://www.safetyalerts.com/rcls/nht...t98/98e031.htm
That was a few years ago. I still trust them though. They make some hardcore stuff.
I baught some for another vehicle from www.rockauto.com
------------------
that was 6 years ago... im shur they have fixed the problem...
Travis
www.cardomain.com/id/dxhatchback
the repair company called today, 262.50 for the ball joint, 265.00 for the axle and 80.00 for the alignment. Along with the tow bill, this comes to about 750.00, im wondering if im getting ripped, and if i could repair it on my own for less green.
-K
'89 Accord LX
When she woke in the morning
She knew that her life had passed her by
And she called out a warning
Don't ever let life pass you by
~Incubus
"THE THIRST FOR SPEED IS NEVER QUENCHED"
defently call somewhere else...
axle can be done in teh back yard, alignments are usually like 50 bucks, and you could probably find a place to do the BJ for like 150-200 bucks
call around...
Travis
www.cardomain.com/id/dxhatchback
hey, if you get back on today, call this number
303-522-7449
if you just wanna go down and see some cool cars,
3639 S Bannock Street
Englewood Colorado... its about 20 minutes from the edge of Denver
ask for matt, he said his prices are about the same, he might be able to get you a better deal...
he is in Englewood, he owns Speedwell Performance...
Travis
Last edited by dXsquared; 01-02-2004 at 10:29 AM.
www.cardomain.com/id/dxhatchback
Thanx Travis, I called him and he gave me some good advice, ima rent a tow hitch and borrow my brother-in-law's truck to tow my car back here, cause the repair shop i have it at now is trying to horse@#$! me.
-K
'89 Accord LX
When she woke in the morning
She knew that her life had passed her by
And she called out a warning
Don't ever let life pass you by
~Incubus
"THE THIRST FOR SPEED IS NEVER QUENCHED"
You could get the OEM Honda part from Honda. It last 15 years before, why not put the same thing back in?
Posting Permissions
Reply With Quote
Bookmarks