Yes it's disc brakes from SE-i
Look What i got for $125.00
Yes it's disc brakes from SE-i
Last edited by TWOLOUDNPROUD; 02-17-2004 at 11:10 PM.
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
I hate you so much.
------------------
those look to be in pretty good condition
You got a better deal than me. But I already have a spare set of calipers.
Refinish them before you put them on.
Did you pull them off a 2 door or 4 door and how many doors do you have.
reason I'm asking is I pulled mine off a 2 door and I need 4 door E-cables
and if you have the wrong ones maybe we could do some horse trading.
Congrats
NSWST8
I got them off a 4 door SE-i and thay are going on my 4 door LX-i I need the E-brake cables to
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
so is putting SE-i disk convesion hard to do? i just wanted to know. no biggie
200+ ALL MOTOR LS VTEC
Not a big complicated swap. Just some time and effort on your part.
Highly recommend the swap if at all possible.
NSWST8
hey tom, if you can score some more disk how about you let me buy them off you.
If someone has coupes e-brake cables, I may be able to trade. I'm going for some disc brakes next weekend. I'm gonna take what I can get so if it's a 4 door I won't be able to use the e-brake cable and will need one from a coupe.
No projects. Life consumes my time and money.
If i find some more i will buy them and let you know but so far these are the only one's i have found i went out to pick n pull in stockton today just to take a look and there it was a complete SE-i the only thing the E-break cable was cut but today was a good day.Now it time to have aOriginally Posted by Busted_Blue
and
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
I have a set of E-cables for a coupe, and they look great.
If you come across a 4door and the e-cables are in good shape I'd trade.
So keep me posted.
Tom: Majestic has them from $49 apiece + S&H. If I can't score some here I'm going to have to buy them too.
NSWST8
Last edited by nswst8; 01-31-2004 at 09:00 PM.
dont forget the pain in the Butt part Bleeding out the Brake's after changeing out the that dam brake Valve in the FrontNot a big complicated swap. Just some time and effort on your part.
Highly recommend the swap if at all possible.
NSWST8
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
Not bad im still rebuilding my set and just took apart the calipers and stuff and are powdercoated so i just have to get the rebuild kit and re-assemble them. But yours look a lot better than mine did. I also have to get coupe e-brake cables cause mine came off a 4-door.
That's the easy part, one man bleed set up. Agood hand vac pump, bottle of brake fluid, couple of 1/4 inch clear line and your all set.
And you do need E-beake lines, spoke to soon. "aeh"
NSWST8
How does your E-cables look. I've got a set for a coupe and they are in great shape.
NSWST8
I just got some to.But I got the rest of the car to go with it
Stop bench racing and pick up a wrench
I know my spelling sucks and I suck with computers deal with it.
Grab a cookie and get back in your room. :cool2:
NSWST8
New E Beake Cable Thay are a little high priced but new but on monday i will check with Honda i get it at cost there i have a account there
Last edited by TWOLOUDNPROUD; 01-31-2004 at 09:30 PM.
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
Details.
NSWST8
Last edited by nswst8; 01-31-2004 at 09:36 PM.
Beer is GoodNew E Beake Cable Thay are a little high priced but new but on monday i will check with Honda i get it at cost there i have a account there
LX-R coming soon Here's a hint. 89mm stroke/ 41.60cc head /ARP head & main stud's /SRP piston's 81.5mm 9:5:1/Crower Rod's & more to come
well i was woundering if i do find the rear disc brkes like you are they really hard and what i need i got a 2 door coming soon and i wanted to change it to all disc let me know what i need and i can get some good prices where i work.. I get good discount and napa where i work... PLz let me know i new at this kind of stuff.... SWeeeeeeeet
Disc Brake Conversion
The How-To has everything you need.
No projects. Life consumes my time and money.
88-89 SEi Rear knuckle, calipers, rotors, E-brake cables and porportiong valve. you'll have to get this off a junked ride trying to purchase new is going to expensive and difficult.
If you go to the "How to" I believe there is thread on this already with all the specs.
Hope this helps. LOL
NSWST8
right on thnks for the help now i can get started now... easy stuff to get not to hard to get and cheap...
It's easy to get off the car. The problem is finding a car that has it and then not getting raped by the yard cause they know how rare the stuff is.
No projects. Life consumes my time and money.
Posting Permissions
Reply With Quote
Bookmarks