alright i cut my springs on my car the other day now im trying to figure out the camber solutions. I droped the front so its only about 1 finger gap between the fender and tire and the rear is about 2. I had it checked out and they said it was 2 1/2 degrees off on one of the front tires and 2 degrees of on the other. The rear are both one degree off. Im trying to fix the back by spacing it out with washers but for the front i want to know if the prelude upper control arms will be perfect for 2 and 2 1/2 degrees off or will it not be enough or is it to much. After i get it close enough to correct i will take it to get aligned! thanks![]()
Bookmarks