88 LX-i hatch parting out.

[BensAccordLxi]

Ok, I'm partting out my LX-i hatch. I have most of the interior parts. I don't have the drivers side rear tail light thanks to the accident I was in.

ANY PART OF THE ACCORD NOT LISTED, MAKE AN OFFER!

I ALSO HAVE THE CASSETTE HOLDER CENTER CONSOLE. IT IS TAN WITH A BLACK SHIFT BOOT.

Performance Parts:
DC Sports ceramic coated header-$165.00 shipped (SOLD!)
MSD 6a ignition-$75.00 shipped (SOLD!)
MSD Blaster SS coil-$45.00 shipped (SOLD!)
MSD 8.5mm wires-$20.00 shipped (SOLD!)

Tranny and stuff:
5sp Tranny (85K miles)-$600 shipped (SOLD!)
Honda clutch cable (1K miles)-$15.00 shipped (SOLD!)
ACT stage 2 clutch w/flywheel(1k miles)-$200.00 shipped (SOLD!)
Axles (15K miles)-$75.00 shipped (SOLD!)

ECU-(SOLD!)

Every thing in the car is up for sale. Ask for it and we'll work out a price.

My email is [email protected]

[BensAccordLxi]

I also have an older Sony Casset deck with 10 disk CD changer and all cables-$50.00 shipped. (SOLD!)
I also have indeglow gauges, they are in ok condition (speed has a black mark on it)-$10.00 shipped. I have a tan casset holder center console-$35.00 shipped.

[Nuffice]

Do you have the baskets that hold the speakers?

[BensAccordLxi]

Front baskets, yes. Rear baskets, no. I'll give those to you for $15.00 shipped.

[BensAccordLxi]

The radiator in the car is in excelent shape. I just had it replaced 6 months ago. I'll sell that for $60.00 shipped. (sale pending)

[SteveDX89]

What color is the interior?

[BensAccordLxi]

It's that maroon/brown color.

[markmdz89hatch]

Is that a stock flywheel that comes with that clutch?
Can I call dibs on that header?
How much for the brake master and propo valve? (If you're willing to pull that stuff.)

[BensAccordLxi]

It is the stock flywheel that comes with the clutch. The header just sold, sorry. I'm also waiting to hear back from some one on the ignition stuff. The tranny, axles, clutch, flywheel, and clutch cable are in excelent condition. I had the tranny installed in September along with the clutch and clutch cable. The car was rear ended in November. When I ran at the strip with the new stuff, it ran the same time with full interior as it did befor (befor new tranny and clutch) when it was gutted.

[markmdz89hatch]

ahh well, the header was bound to go fast.

how 'bout the brake master and propo valve?

[SteveDX89]

What condition are the inside door panels, both of them? Are there any tears in the jambs? How much?

[BensAccordLxi]

The door panels and a few small tears in the inside by where the door latch is. Other than that, they are in great shape-$65.00 shipped. The price is high because of shipping.

[BensAccordLxi]

I'm not sure if I can pull the brake master. I'll look into it.

[buish]

how much for the front disc setup? i have a DX and might want to upgrade to LX-i rotors up front? basically, the arm, knuckle, hub, spindle, backing plate, rotor, calipers, brake lines? you know how much would it be shipped?

if mark is talking about the brake master cylinder, its held on by 2 nuts and 2 hard brake lines. just move the lines out of the way, and it should be fine.

[Rendon LX-i]

i want your Dash Cluster. How much shipped to 50588

[BensAccordLxi]

You want the instrament cluster? I have 2 of them. I'll give you the one that has the working gas light for $40.00 shipped.

[87AccordLXsdn]

how bout the black trim on top of the bumper??

[BensAccordLxi]

What black trim? My bumpers are painted all black. If you are talking about the strip between the bumper and the hood, I do not have that.

[Rendon LX-i]

a Ben is it for 5 speed. cuz i need 5 speed cluster

[Nuffice]

Front baskets, yes. Rear baskets, no. I'll give those to you for $15.00 shipped.

Just need the fronts w/ the screws that hold them in place.. If you have that, get you have yourself a deal!

[BensAccordLxi]

I have the fron baskets with screws. If any one wants the Pioneer speakers that are in them, I'll sell them for $25.00 shipped. Oh, I DO HAVE the black plastic molding that goes between the bumper and the hood. Just found it when I was getting the stock springs out for some one.

[SteveDX89]

Can you take pics of the damage on the door panels?

[Nuffice]

I have the fron baskets with screws. If any one wants the Pioneer speakers that are in them, I'll sell them for $25.00 shipped. Oh, I DO HAVE the black plastic molding that goes between the bumper and the hood. Just found it when I was getting the stock springs out for some one.

I want the baskets w/ screws. Also do you mind selling the screws the hold the door panel to the door and the screws that hold the center console together? If so, post a price w/ method of payment. thanks!

[BensAccordLxi]

Ok, first, I have no way to take pics of the doors, sorry man. Like I said, it's just on the side where the door latch is. Second, If SteveDX89 does not need the screews for the door panles, I'll just put them in the box. I'll PM you with the billing info.

[87AccordLXsdn]

i need that black trim thats just on top of the bumper, it follows in line with the trim on the doors and stuff....its #4 in this picture