anyone who has stock jdm 86-89 accord, or 85-87 prelude b20a cams for sale let me know. trade my usdm b20a5 cams plus cash for them. good if you want to get regrinds.
also, front sensatrac shocks.
let me know whats available.
anyone who has stock jdm 86-89 accord, or 85-87 prelude b20a cams for sale let me know. trade my usdm b20a5 cams plus cash for them. good if you want to get regrinds.
also, front sensatrac shocks.
let me know whats available.
I doubt you will find anyone willing to part with B20A cams but i am told that B18A1 ---- (Acura Integra 90-93 non vtec) cams will fit so you can buy some new ones from a place like crower. I believe i did read on a prelude forum that the ends are a little to long but they can be machined down to fit properly with only minor work. But a machine shop will have to do it most likely because the metal is very hard. Just thought i would suggest this although new cams are not cheap but its a good alternative and will give more power at the same time.
well, I make frequent trips to vancouver, so what i had in mind is you send your cams to vancouver where i'll pick them up, drop my cams off at colt cams so whoever can get a regrind using my cams. this way, i good set of jdm b20a cams aren't wasted.
Posting Permissions
Bookmarks