1992 Acura Integra LS with b16A2

[HondaSi88]

I am selling my 2-door 5-speed 1992 LS with a 2000 si b16A2 engine. The car will be completely stock except for the engine which has around 80k on it These are the new parts that will be installed when the car is purchased:

1. New Oil and Compression Piston Rings
2. New Headgasket Kit and Valve Job
3. New Timing and Alternator Belts
4. Oil Filter and New Oil
5. New Spark Plugs and Wires

Like I said before, the car will come stock with a 92 GSR suspension, stock Acura Radio and maybe some 92 GSR rims or LS hub caps or even the painted gsr look at like rims... I haven't decided yet.I was planning on having the car painted next week but again that is still up in the air at this point.The only problem that the car has which I haven't fixed was the 5th gear pops out from time to time! I was going to replace it with a LS 5th gear "longer for Highway use" when i replaced the clutch but never needed to.

I should have pictures by the end of the week . Serious inquiries only. Email me, [email protected], with any questions or call me, Kevin, at 240 498 5394.
asking 4200

[HondaSi88]

follow the link for pics http://www.dragva.com/forums/showthread.php?t=42899

[blazin3gen]

u have to register to see pics

just a heads up for ya

[HondaSi88]

if this doesn't work then email me!
thanks

http://www.honda-acura.net/forums/sh...d.php?t=125158

[BensAccordLxi]

I'll race you for slips...J/K. That wouldn't be a fun way to get rid of your car. Have you put it in Auto Trader? A few people I know are always getting cars off Auto Trader.

[HondaSi88]

race me for slips if u look in one of the pictures you'll see another car under a car cover! I won it that WAY!
but i wont offically sell the car until im finish with all the maintance
plus im putting or bringing it back to stock

[BensAccordLxi]

Sorry, can't see the pics. I wouldn't be racing any one in my Accord, it's getting parted out.

[HondaSi88]

This is the situation........I had a friend that was gonna fix everything on the car but we had a falling out so that isn't happening!
Here are the problems

1.b16a2 block needs rings "I have them NEW needs to be installed"
2.Ys1 tranny pops out 5th gear
3.My battery light stays "some kind of charging problem"
4.Front Windshield is CRACKED

I had several offers for the b16 head and tranny so basicly make a offer with the engine or without it!
The body has HIGH MILES but the engine has between 60 or 70k on it from what i was told!
Anyway i am located in Silver Spring, MD and the car is available for a test drive!
I have several pictures so email me or call thanks
[email protected] 240 498 5394

[Vanilla Sky]

wish i were closer... i'd offer $800 and drive home... LOL

[HondaSi88]

anyone else?

[Coroncho80]

Danm, you are selling your teg ...........

[HondaSi88]

im selling this one but i have another one in the works!!!!!!

[HondaSi88]

Coroncho80 where did u get your intercooler and how much did it cost?

[Vanilla Sky]

what, you'd do $800?

[blazin3gen]

what, you'd do $800?

lol eh........

[Coroncho80]

Coroncho80 where did u get your intercooler and how much did it cost?

I got it from http://johnnyracecar.com/ for $200. It was a special that he had during Christmas. It's the 6" one and he has it for $240 shipped to your door If you can, get it man; its really worth it, plus it fits quite nicely

[HondaSi88]

that thing is off the HOOK! I have a evo 8 intercooler but it needs to be cut....and everywhere ive been so far they want between 120 and 180!
anyway im looking to get at least 1500 for the car
thanks

[HondaSi88]

you have a 92 bumper? and did u have to cut into the bumper support or does it fit
right underneath?
last question does it rub at all?
OH car still for sale!!!!

[Coroncho80]

you have a 92 bumper? and did u have to cut into the bumper support or does it fit
right underneath?
last question does it rub at all?

As you know, my car is a 91 GS. I took the 90-91 front bumper off including the foam thing. Got a 92-93 bumper cover and slapped it on! that's it

I used the same screws and everything. Oviously, I cut the middle plastic lines so it look like a big mounth for the FMIC. The only thing that I had cut in the bumper to fit was underneath the bumper on the right side ( looking to the car) because the intercooler's corner was in the way. You can't see the tip of the IC though. Besides that, bolts right now