need your opinion

[sxy86accord1]

i know yall get this alot and i have tried to do a search and get a lot of responses. I have a 1986 accord lx and i was wondering if someone could tell me what a good sized drop would be. here is my website..... www.cardomain.com/id/sxy86accord1 . Thanks for any help yall could give me.

[accordlxi2.0]

nice. . .first off what size r those rim's they look pretty damn good.
i say about 1-2 inches.

[sccrsteve5]

i'd say around 2-2.25 inches would be nice

[Justin86]

It depends on your roads down there. I'm droped 2.25" and its perfect for me casue its just right for handling and I have little fender gap. So with your rims which I think are 16's I would go 2.25" and if you wanted it higher then go 1.5" and get the H&R springs.

[SteveDX89]

That, my friend, is 2.25" on Sprint springs. I must warn you though that the ride is very stiff and you will absolutely need revalved Bilsteins or Konis if you can snag them.

[NXRacer]

since you're rollin on BLING, i'd say dump the SOB at least 3 inches. If you cut the stock springs, the ride won't be too bad although you'll kill your struts after a while, but you'll kill em anyway no matter how you lower it.

[Justin86]

If those are 16's and you want total looks I agree with Caleb, 3" slam that bitch with some coilovers and if you don't like it just raise it. I change my ride height to fit my mood for the week. I usally keep it at 2.25" but some time I like to slam it 3.5" and more.