hey, i wrote this before but i don't know if it's really true. People buy spring clamps and just pinch certain parts of their original springs together until it get to be as low as they want it. A friend of mine did this, but i'm not really sure if it really works. anyone know anything of this strange lowering method? if so, where can i find these clamps?
3geez for life.
WTF.
u can use a device like that to compress the springs so that you can remove them from the car to put on lowering springs, but i wouldnt use them on the car under any circumstance.
Yeah the removal is the only spring clamping I have heard of.
88 Accord DX. Custom Mercedes Benz Grey Paint. 16" RS Limited Rival gunmetal rims. Wrapped in Dunlop 205/45/16. MSD Ignition Box 6A. MSD Ignition Coil. NGK Wires. Custom intake w/civic air intake box.2.25 inch exhaust piping. Fireball muffer. Grounding kit.
They have them at canadian tire here.You see old caprices and stuff like that with them.Around here.
Stop bench racing and pick up a wrench
I know my spelling sucks and I suck with computers deal with it.
i freaking knew it! my dad works with an engineer who clamped his springs together. let me draw you a picture of the idea of these lowering clamps
3geez for life.
i think this is how it's done with these clamps
3geez for life.
They sell clamps for "lowering" and "lifting" cars with coil springs at Autozone. It seems like a terrible idea to me. Doesn't seem very safe at all. What if one of the clamps broke and caused you to lose control of the car when it lurched from the potential energy in the spring being released all at once? It's also horribly ghetto IMO. It's not an unheard of method for lowering cars, but it's one step more ghetto than chopping your springs.
*EDIT* By the way, the coils on the front on our cars are wound too tightly to be able to use these clamps anyways (unless you used hose clamps or something, but those would almost be sure to break fairly quickly).
Last edited by 300700'88lx-i; 04-01-2004 at 06:47 PM.
i agree i dont think it seems like a good idea. and i could definetly see some safety concerns. and its only $100 for a set of cheap springs or coilovers which are probably a better idea.
it sounds like u just wanted to know more about it thoguh, and not that u had your heart set of dropping your car that way.... but i guess it is out there!
i do agree with you on the ghettoness of this.lol but in my situation, seeing how i don't have any money, i was just "considering" this method. thanx for your advice.Originally Posted by 300700'88lx-i
Last edited by 88accordhb; 04-01-2004 at 06:55 PM.
3geez for life.
ok forget this post. i don't know wat i'm doing AHHH! how do you delete posts?
Last edited by 88accordhb; 04-01-2004 at 06:57 PM.
3geez for life.
They look safe and I think they're safer than the spring compressor I use whenever lowering cars, but the bad news is that they won't fit stock 3G springs because of the gapping between the coils. I've tried them before and they don't work so that's why I stuck with the other compressor. I think the ones you're talking about is called the "spring-coil compressor" or at least that's what the Autozone here calls them.
my friend used those spring clamps on his car before he cut the springs, then he now has eibach springs. it was a bitch getting the clamps on because he used some big vise grips. anyway, i've been thinking about those, but dont know if they have any negative effects. i've seen them at o'reilly auto parts, autozone, and pepboy's. i think the cheapest ones were like $12 for the set.
Keep it HONDA. Or at least Asian.™
*Weber 32/36*Pacesetter Header*2.25 in. Cat Back exhaust*SE-i rear disk brakes
B18C swap ditched, A20 to be revived
Looking for K20/trans for ultimate swap
well if i do try it, i'll keep you guys updated. hopefully they have some that will fit. i don't mind spending 12 bucks to lower my car, i'm just scared to death to have them pop out when i'm driving
3geez for life.
Damn, I must've misread your post the first time around...anyways, I wouldn't clamp my stock springs with those clamps and drive around with it like that...good luck with whatever you choose...
Just sounds like a bad idea, I can't beleive people havn't gotten hurt or sued yet. Not to mention the crappy ride ur gonna get for permantly compressed springs.
Posting Permissions
Reply With Quote
Bookmarks