New Modified Erebuni Ground FX Installed

[DeathRat]

Well peoples, after a long winter designing & modifying, my new "modified" Erebuni Ground FX Kit is finally back on my Accord. I hope you like it....Here's some pics.....The rest (including Night Shots, Interior Shots & "Work-In-Progress" pics at on my Car Domain page)

[Vinny]

Looks good. We were just talking about cutting all the center BS out of my erebuni bumper cover like you did on yours. If you get a chance shoot me a PM on what all you had to do to install the bumper cover, mine fits like ass

[Mike's89AccordLX]

That looks sweet man. It's really got a stealth look to it. Good job!

[dub88acc]

i'm not feelin the front. I guess its the turn signals. They don't go with the car.but the back looks tight

[Bryan]

Now you need to drop it. Cause other then that it looks fucking hot.

[Justin86]

Yea the turn signals look out of place, did you use 4G accord ones. I think if you got rid of the amber bulb with a blue one it would look much better. But onther wise the car it starting to look pretty good.

[adams86lxi]

tight looks good!

[dXsquared]

front definetly looks hacked together...

Traviss

[DeathRat]

The front signal lights are APC Clears from a 94/95 Accord. I would love to install "blue" bulbs in them, but alas the cops here would have a hayday with my car then! LOL I had to place these lamps where there are instead of closer together as planned. This is mainly because of the actual stock bumper mountings underneath. If I had cut anymore of the lower support away, I would have to find a new way to keep the bumper on the car instead. I also had to keep the lights where they are due to bulb placement within the assembly......If I had moved them anymore, I wouldn't be able to replace the bulbs easily enough & would have also had to lengthen the stock wiring harness too.

Dropping it is another project after Rear Disc Swap! I want better wheels & therefore larger disc brakes is a must first. I'm only running on 13" tires at present. I figure a 2" drop & 17 X 7 Konig Imagine Rims & low-pro tires would make it even better looking.

[lightbulblxi]

i like it man, looks good.

[Elijah]

Looks good Al. Much better then the last meet. We really have to get you sitting on a new set of shoes.

[88accordhb]

damn that looks sick, why don't they make body kits that are more tech? like with vents and stuff

[DeathRat]

damn that looks sick, why don't they make body kits that are more tech? like with vents and stuff

I was going to do that but, those damn vents & louvers are $$$$$! This cost me $500 CAN already to just modify my existing kit. Heavens knows what it would cost to do it from scratch, probably around $1500 CAN at least. I was considering also getting a "Black Widow" kit for a 4th Gen Accord, but it was too $$$ too. Instead I made do with what I had.....It may not be the best looking kit around, but it was the cheapest solution to my problem I found though.

[DeathRat]

Looks good Al. Much better then the last meet. We really have to get you sitting on a new set of shoes.

That's next after the Rear Disc Swap & larger Front Disc Brakes.
I then want these 17 X 7 Konig Imagine Rims too....

[Busted_Blue]

Nice custom work. Quite orginal, never seen that before. The corners look odd due to position when looking at it from the front. Like everyone says, DROP IT!!! =). If you want clear turn signals get those Sylvania Clear Amber Bulbs. It is like rainbow-ish tint on the bulb that makes it amber when its lit on. So you won't get in trouble with cops.

[Justin86]

Yea I have blue bulbs but when you use them they are actually put out white light.

[Mattphi]

where can i get that kit? How much?

[DeathRat]

Nice custom work. Quite orginal, never seen that before. The corners look odd due to position when looking at it from the front. Like everyone says, DROP IT!!! =). If you want clear turn signals get those Sylvania Clear Amber Bulbs. It is like rainbow-ish tint on the bulb that makes it amber when its lit on. So you won't get in trouble with cops.

I used the amber bulbs that came with the APC Clear lights.....I'll look around & see what other "amber" bulbs I can get. I'll especially look for those Sylvania Clear Ambers though.

[DeathRat]

Yea I have blue bulbs but when you use them they are actually put out white light.

I'm not using blue bulbs though.....The blue you see is just the accent blue bulb incorporated into the headlamp assembly from APC. I'm using "Off-Road" rated H4's (100/55W).

[DeathRat]

where can i get that kit? How much?

Well the kit started out as a "stock" Erebuni Ground FX Kit for a Sedan with Front & Rear Fascias along with Side Skirts. It was already installed when I bought the car.....I just "modified" it over the winter months to what you see today. Here's where you can get a "stock" Erebuni kit though:
http://www.erebunicorp.com/ge/haccord86.htm

[HostileJava]

I don't like the front end sorry, it looks like it was modded and not quite finished. Which is ok if your not quite finished.

[HondaBoy]

hey, thats alright! as for the people not feeling the front indicator lights, how about doing what you did to the tails to them? i think that would look good. like smoke them or black them out what ever you say. some new rims will tie that together nicely.

[blazin3gen]

i like it bro that is freaken awesome!, so u have a stock drop? wtf i think im going back to stock cuz it really dosent look so bad

[DeathRat]

I don't like the front end sorry, it looks like it was modded and not quite finished. Which is ok if your not quite finished.

Actually I ran out of $$$$.....So that's all it gets for now!

hey, thats alright! as for the people not feeling the front indicator lights, how about doing what you did to the tails to them? i think that would look good. like smoke them or black them out what ever you say. some new rims will tie that together nicely.

I'll leave them as is for now......I still might "Night-Shade" them though.....haven't really decided yet.

i like it bro that is freaken awesome!, so u have a stock drop? wtf i think im going back to stock cuz it really dosent look so bad

Yes, it's still the stock suspension with 13" rims too.

[HostileJava]

That's cool, post up some finished pics when you are ready to paint it.