ive been working on how to work in some aluminum mesh on the front of my 89 LX-i, just wondering if anyone had done this how i should go about it. i wanna work some fog lights into it too.
ive been working on how to work in some aluminum mesh on the front of my 89 LX-i, just wondering if anyone had done this how i should go about it. i wanna work some fog lights into it too.
https://www.3geez.com/showthread.php?t=65...ght=Mesh+Grill
You can also use search for Mesh Grill and find alot of infomation.
I fiberglassed my Mesh Grill into my Ground FX & fiberglassed on a smaller piece behind the stock grill that sits just above the bumper too.
heres my mesh grille. it was originally left bare. it was galvanized steel, so the color was like aluminium. then i finally painted a while back. havent made anything for the bottom grille. i found it easy to cut with tin snips. the stuff i used was from Home Depot, cost about $3 i think for a sheet about 7x4 feet.
Keep it HONDA. Or at least Asian.™
*Weber 32/36*Pacesetter Header*2.25 in. Cat Back exhaust*SE-i rear disk brakes
B18C swap ditched, A20 to be revived
Looking for K20/trans for ultimate swap
the one that Hondaboy did, I think I did the same thing. That bit comes apart and you just sandwich the mesh in there (thats what I did anyways) and for the bottom part I just zip tied some of that gutter topper mesh stuff in there, worked out nicely.
Check my cardomain for sale items! Cardomain
On mine I fiberglassed it behind the upper grill instead like this:
Then on the lower portion of my Erebuni Ground FX, I cut away the center portion & fiberglassed another piece of Mesh instead like this:
Posting Permissions
Reply With Quote
Bookmarks