Well I was driving and lol i hear crunch crunch crunch BAM! Damn clutch! Gotta put one in today. Anyone have clutch problems??? I heard the clutches in the 3 geez were pretty good. OH YA and right after that i got in my trunk to get the hood prop and now my trunk wont close. Shitty day.
damn you have bad luck man....i was pulling my rear bumper cover off the other day and broke all 10 of the bolts holding it on because they were from 1985 and rusted to be hell.....i had a bad day too
1983 toyota celica gt
http://www.cardomain.com/member_page...page_id=3283231985 toyota celica 3sgte project1989 toyota supra turbo1986 honda accord 4dr lx-i
you got that 110 % right! my clutch been keepin the old gurl runnin 113k miles. but i'm started to have some probs in 3rd and 4th. just gotta press it all the way down to get em in w/o grinds. i used to only have to push 3/4 the way down but gotta do it all the way now. sux.Originally Posted by 89dxowner
3geez for life.
That sucks about your car. Seems like when one little thing goes wrong, a bunch of other stuff goes wrong too. Hope you get the new clutch with little hassle.
Sounds like you need to adjust your clutch cable. If you follow your clutch cable down to your transmission, there is a place where it goes through a metal bracket that the end of the cable housing rests in. There's a little threaded collar on the end of the housing that turns to allow you to adjust the cable. You will probably need to turn it clockwise (tightening it) a few turns. Do it til there's about 1/2 inch play in the pedal or in the clutch release arm. Hope this helps.
Well something else is wrong too. The bam i heard was my 5th gear syncro shattering . I replaced the clutch (was much needed anyway) then started it up let out the clutch it died its stuck in 5th gear no matter where the shifter is. So.... Now i am trying to find a diagram of the tranny to see if maybe i can just replace the syncros without replacing the whole tranny if it didn't tear anything up. Also i had to buy a rear motor mount and put t on the old one was in about 3 pieces. And the valve cover was leaking so i figured while i was at it i would put in a valve cover gasket. Oh ya and im leaking break fluid out the back brakes so theres another job comming soon. What a day. But i did fix my trunk. lol.
Last edited by 89dxowner; 05-08-2004 at 07:03 PM.
yeah I've had one of those days. I was driving from school and swerved to avoid hitting a dog...and BAMM...hit the curb and jacked-up my tranny and bent my rim!
Posting Permissions
Reply With Quote
Bookmarks