Hi guys,
I recently got hold of some nice sweet deals. A JDM Integra DA8 1992 with factory installed B16A, and a JDM 3rd gen Accord with B20A, both have manual shifters.
I got hold of the teg, changed the cambelt, repaired the VTEC adjusted the PGM FI, replaced tranny oil and all the usual tuneup stuff - Did it all at home in 3 hours. Did the same for the Accord too. (no VTEC of course)
The cars pull like crazy in bone stock condition, the teg is rated at 160 hp while the Accord I think is above that. It has TORQUE.(3gen rules) u cannot start to imagine the pull, the power and poise of the JDM 3rd gen in action
Anyways - I bought a Mitsubishi TDO4 turbo with dual vane compressor blades. Donaldson POD type air filter, a custom cut volvo FL12 Truck intercooler, HKS blow off valve. custom mandrel bent charge pipes, fabricating a custom equal length runner manifold, Nismo adjsutable fuel pressure regulator. MMC montero oil cooler and NTZ remote bypass oil filter
I am planning to run abt 8-9 PSI boost - (midrange power) any ideas for what I should be doing next. Any help would be appreciated.
I got all these parts from an assorted scrap yard and they are in mint condition. Wondering how to make a separate fuel management system. Cant get hold of one here.
Reply With Quote
Bookmarks