3g doesn't but does 4g

[cahil_1]

Got a question and it kinda has to do with timing belt but concerning a 4th gen accord, don't trash me if i'm not in the right area. Anyways, i lost a timing belt on my 3g before and it didn't bend the valves, If the timing belt on a 4g breaks will it bend the valves?? trying to help a friend i know this might be a shot in the dark. so let me have it!

[k-roy]

Flip a coin, thats your chances of a fucked up head. The only way to tell is by ripping out the head.

[AZmike]

The only way to tell is by ripping out the head.

Or you could spend $30 on a new belt and give it a chance to work right. If you're lucky you're done; otherwise you have a timing belt to use once the engine is mechanically sound again.

[smufguy]

Or you could spend $30 on a new belt and give it a chance to work right. If you're lucky you're done; otherwise you have a timing belt to use once the engine is mechanically sound again.

Thats one of the simple and best advices i have heard in a long time . i like it.

[AccordEpicenter]

yes on an f22 engine the valves will go right thru the piston face

[P|eszczoH]

yes on an f22 engine the valves will go right thru the piston face

in a f20 it will f*** up too
even in a 3g it can.
If You take your head of You ll see that the piston are specially formed
( there is a digged area for every valve )
I did test it while changing a timing belt and valves and pistons do crash in a 3g A20A.
ina 4g there are more valves :-) so it will cost you more :-)
any way when it happsns its really bad.
see Ya.