accord 2gen weber setup

[accordweber]

I have accord 2gen 85 in good shape, original engine ES2 1.8l cvcc engine with a 3bbl carb. 90hp., 5speed man.

i do some upgrade and tuning, i begin to change the headcam to a jdm a18a, installaling a can gear-pulley(home-made), trasmision modified with pinions and synchronizer of zc-trasm., flywheel polished to 13.5lb and a muffler of 2"(completed) all other are stock, i think the car is doing fine in 1/[email protected] but like all here we wan more so i was thinking on puting a pairs of 40DOCe (allredy purchased, second handed) i just wan to know what i need to have in consideration at the time i put the weber's on?, and what is the most accurace setting for the weber?.

i read a lot in the past forum post and search to but i wolud like to read or listening other idea, what more i can do to my car?

weber setup:

needle valve: 2.00
air corrector jet: 160
emulsion tube: f11
idle jet: 50f11
main jet: 130
pump jet: 40
pump spill: 50
venturi(choke tube): 30
auxiliar venturi: ???
throttle plate 79*30
like to know if this setting are fine for star to tuning the weber?

here some pick of my car:

http://www.freewebs.com/pagersds/accord85-001.jpg

http://www.freewebs.com/pagersds/accord85-002.jpg

http://www.freewebs.com/pagersds/accord85-003.jpg

http://www.freewebs.com/pagersds/accord85-004.jpg

note: sory for my english this is not my natural languaje.

[ET2]

you need a manifold for the webers, look aroud http://www.preludepower.com theres alot of info on carb'ed setups and you have the same engine has the prelude, the jetting on your webers is a little weak and you need bigger chokes at least 34mm, a good weber dcoe tuning book will help you out alot