b20a spark plug wires

[adams86lxi]

alright, im about to get some new plug wires for my b20a. I believe its the 90-93 acura integra non-vtec that work with the acura integra distributer, on the b20a. Does anyone have any links for any cheap performance wires that work well that i could get for my b20a. I was thinking the ngks but their 40$ is that to much for ngks? or could i find them cheaper? also i dont need plugs yet but does anyone know what kind of plugs you use for the b20a? i looked in the faq section about interchangeble parts for the b20a but couldnt find anything about the plugs im guessing their the same as the b20a5. THANKS!

[k-roy]

Yes use the B20A5 plugs. $40 is a little high for NGKs but its not horrible.

[RobT5580]

I have not found many decent wires surprisingly for the Integra except for Nology ones but thats 3x what the NGK's are so i dont thing you would want them. You might be able to use B18 plugs but i have not checked yet but i am told the B20A5 ones work fine as well.

[k-roy]

If you want a trick ignition that does not cost an arm and a leg check out what my Integra is getting
http://www.cranecams.com/index.php?s...lvl=4&prt=2012

[adams86lxi]

alright thanks guys! so the b20a5 wires and the acura integra 90-93 non vtec ones will work fine right? In that case which ones should i get if i get ngks? integra or the prelude ones? thanks!

[RobT5580]

The B20A5 wires dont work if i remember right you need the teg ones. So get the teg wires and B20A5 spark plugs and you should be fine.

[adams86lxi]

alright cool thanks rob!

[adams86lxi]

alright one more quick question ( i dont want to get the wrong ones) which model of the 90-93 integra plugs should i get them for integra rs,ls,or gs? thanks!

[RobT5580]

Those are all the same if im not mistaken just make sure its non-vtec which all of those are anyway.