first off sorry mods. if in the wrong spot.
but one prob. on my 88 lx the driver window.
it's off the track and it's being held with tape.
but when you roll it down,with the auto feature it'll keep going and going.
you don't hear nothing else moving but the motor.
as for the other window's they roll up and down FAST.
can you guy's help? . . . .
As far as the glass being off track. On the bottom of the glass there are 2 plastic pieces that have bolts thru them to hold the glass in. Check to see that both are still glued good to the glass. I had 1 awhile back that came loose and I had to re glue it. Just a guess.
As far as the window not going down, you will have to remove the door panel to see what is going on. Look to see if any bolts are loose. Also check the regulator. You should be able to see a half moon type gear. Make sure there are no broken teeth on it.
hmm is the reglator hard to replace? or take out?
Pretty straight foward. either the bolts to the window track have failed or as it was said the window is unglued. anyway your going to have to find out what it is.
Phil
and this is why the motor can keep on running? . . . . . .
i'm gonna try if i get my short leg cast on,hopefully . . . .
dunno if this is the same problem you might be having, but my left rear door's window was jacked up a little. there is a ball joint type thing that came out. it poped back in and there i have a window that isnt messed up anymore.
Keep it HONDA. Or at least Asian.™
*Weber 32/36*Pacesetter Header*2.25 in. Cat Back exhaust*SE-i rear disk brakes
B18C swap ditched, A20 to be revived
Looking for K20/trans for ultimate swap
okay i went to start it up, i went to close the door and it was some thing inside rattiling, sounded metal, maybe the regulator fell off?????
You are going to have to take the door panel off to visualize the problem. If your motor is still functioning then something has become disconnected.
Hope this helps.
Phil
Posting Permissions
Reply With Quote
Bookmarks