what's best shortram kit???
i saw these APC intimidator intake kits at Pepboys/Walmart for like 96 civics, Delsols, and preludes. whats the best one for the 3gee? i know they dont have all the holes in the tubing but i wll drill some, but what is the best fitted one? anyone have one of thesE?
You can plug the extra air inlets with vacuum caps. and use a universal breather to cover the vent pipe from the valve cover.
You can practically custom any set up just make sure of the bends will go where you want them to.
Hope this helps
Phil
91-93 integra short ram?
3geez for life.
i only have the choice of those car intakes, because i dont like to wait on orders. i might just use the tubing off the intake kit and put a K&N filter on, if it will help, im definitally installing a heat shield though.
hit the search button on CAIs or short ram intake or even intakes. Look for the thread that has the "best intake set up" or something like that as its title. THey got some specific cars (modded) with some intakes.
What do you mean by all that??? im a newb..Originally Posted by nswst8
this is what he means >>> http://89accord.netfirms.com/DSMHonda/000_1062.JPG
As u can see the PCV inlet to the intake manifold has been vented out by a breather (filter). But as u can see this set up is on the 88-89 efi cars.
For you, its a little bit different. U can either route it to the intake manifold (the driver side) and use one of the unused ports to plug ur existing hoses in if u want.
smuf, that pic doesnt show up.
try here http://89accord.netfirms.com/pictures.htm
i saw these APC intimidator intake kits at Pepboys/Walmart for like 96 civics, Delsols, and preludes. whats the best one for the 3gee? i know they dont have all the holes in the tubing but i wll drill some, but what is the best fitted one? anyone have one of thesE?
APC sucks get this one much better filter powder coated just cut 3-5 inches off the filter end. I had this one before my CAI and it was way better than my friends Pepboys APC special that is why he bought my old one.
yeah, my engine is diff. i think he means instead of plugging all those hoses into the intake tube i can just put a breather filter on the ends of some of them because it will be breathing in the same air temperature anyways.. right? heh
I just got done fitting the Weapon-R Short Ram in and I didn't like the filter end, so I also had a APC 92-95 Civic/Delsol 151000k and the pipe is way to long it will need to be cut to be fitting if you want to go through all that trouble but I did end up using the APC filter with the Weapon-R pipe and I like the way it fits.
As to the vacuum covers, they are little rubber boots to plug vacuums that are not in use so I hope that this clears it up alittle better.
When you remove your OEM air box you end up reomoving the valve cover return vent tube that you can cover with one of those little mini breathers you can pick up at Autozone or use silcone vacuum hose to dress it up alittle.
Get creative when you do this.
Hope this helps
Phil
they only dont come in use when you install a new intake right? well dont they need to be in use, because someting will mess up wouldnt it? im just gonna drill like 10 holes into my intake tube and plug all the hoses that were plugged into my stock one into it. it seems easier that way. im picking up an APC intake friday.
Are you carbed of EFI. If EFI you need not drill any thing the only line is the breather coming off of the valve cover.
Don't start something if you don't fully understand what is going on. This is the quickest way to SCREW something up.
Phil
im efi, have an 86 lxi.
it is best to connect the valve cover tube to the intake so it draws off gasses
i just installed it. i got a 96 Civic intake kit and had to cut it alot but i did it. it sounds great, my car is louder and sounds so much better. i feel a little more hp gain also, like when accelerating, lots of response.
Posting Permissions
Reply With Quote
Bookmarks