filler and drain transmission bolts

[anchovies]

isn't #6 the filler bolt and #7 the drain bolt?

http://www.hondaautomotiveparts.com/...ISSION+HOUSING

[YK86]

Yeah, the labelling is wrong.

[kevins89lxi]

I can not get the top larger bolt out so that I can re fill the trans after i take the bottom out. Any ideas how to get that bolt loose?

[YK86]

I used a socket and breaker bar with a pipe on the end to give me more leverage.

[ELM'sLX+CHL'sDX]

Put the wrench on the head of the bolt and use a hammer to give the wrench a good wack. That should unscrew the bolt. Make sure your wrench is the correct size & fits well otherwise you'll strip the head of the bolt. It's a bitch to remove afterwards.

Claude

P.S. If it's a manual transmission. Use synthetic oil (Castrol, Mobil, Redline, Kendall, etc.), you'll have a noticeably smoother shifting transmission.