Question about intake manifold

[HC_LXi]

hey guys my brother has a intake manifold from a acura Gs B18A1 and im wondering if it bolt in my 3g,and if bolt,it is better than the stock a20a intake manifold?


P.D-Sorry my english

[maka_RTH]

honestly im' not sure about the b18a1..., i know for sure that any from a b16 will work, but you do need to drill a few holes. i'd almost bet that its quite a bit better than the stock mani. the best way to see would be to get a gasket for the intake manifold on the a20, and put it on the end of the intake manifold and see how well it lines up(as far as the ports go). holes for the studs can be drilled.

[HC_LXi]

Thanks,i will have to check with a new gasket then

[night]

any LS is the same.

LS being any B18 and B20