hey my brother has some knowledge swapping ecu's and sh!t and he have a bunch of Ecu laying around from a integra Ls,a PR3 from 1st gen b16a and some other that i dont remember all are OBD0.and im wondering what ecu should work better with the a20 with some mods.
Last edited by HC_LXi; 09-27-2004 at 07:20 PM.
Nothin' 2 Old Racing
Certain CRX ecu can hook up right to our harness!! I used one that had a Mugen chip and it worked good!! IT just trows an unknown code and raises the rev limit and fatter fuel maps!! You will not notice a large gain unless your running an aftermarket cam and an intake manifold!! Our moters do not flow enuff to make a diffrence past 6000!!!
Cold Air intake, Apexi N1 turbomuffler w/2.25 piping, H22 injectors,gutted cat, Dc sport header, accel coil, MSD ignition, Dropzone coilovers
It throws an "unknown" code and runs rich???
probably the 1st gen crx ecu...
http://pages.videotron.com/omus
3geez member since July 12 2000
I need these parts!
https://www.3geez.com/forum/showthread.php?t=67742
damn skippy. the 86-87 crx ecu works. not much of an improvement though. still vac advance.
-david
87 prelude si
87 non-turbo supra
DId you guys talk abot the 1st gen crx the one tha is 1.5L or the 88-91 (PM6)?
Posting Permissions
Reply With Quote
Bookmarks