well, here she is...so far anyway

[86LXItooFAST4me]

remember,it's a work in progress

[86LXItooFAST4me]

more

[86LXItooFAST4me]

and last bunch

[MarioBurke]

damn, all that shit woud look sexy on my car!

nice job

[Elijah]

Very nice.What bushings are those?

[86LXItooFAST4me]

#8 is showing the diff of a stock and ST sway bar. and that would be polly

[jigga225]

yah man it comin together...
make that progress so next summer when I come to Austin we can mob, aiight?
and yeah, where can i get some of those bushings, they're perrty.

[adams86lxi]

nice! Yea wheir did you get those bushings? They look like the ones from auto zone?

[markmdz89hatch]

#8 is showing the diff of a stock and ST sway bar. and that would be polly

Just one concern, you're missing the washers that go between the bushings. (one goes below, and one above the center nut.) I have a mini diagram I'll post up as soon as I get home.

Other then that, it looks like it'll be a hell of a beast once you're done.

Just one other Q. It looks from the picture like that front rotor is a solid rotor, not vented. What's the deal with that? I thought all 3G front rotors were vented rotors.

[PortugalFocus]

looks great man. you are making progress, nice ride

[86LXItooFAST4me]

yah man it comin together...
make that progress so next summer when I come to Austin we can mob, aiight?

Hell yeah jigga, sorry bout last time dude but my head was still in the shop (for 6 months.... youre still the man though Sean) but yeah, im just waiting on the GC coil overs and spring perches **CAUGH CAUCH ***UofACATS ***CAUGH

then i gotta get a new front end radiator support and im back rollin. i still have alot of other shit to put on too. this is just the beginning

Just one concern, you're missing the washers that go between the bushings. (one goes below, and one above the center nut.) I have a mini diagram I'll post up as soon as I get home.

Other then that, it looks like it'll be a hell of a beast once you're done.

Just one other Q. It looks from the picture like that front rotor is a solid rotor, not vented. What's the deal with that? I thought all 3G front rotors were vented rotors.

man, you all made me bust out the shoes and flash light and go double check myself, lol. it just looks like the washer isnt there but it is, i have it all loose still cuz i dont have the struts on. i didnt want to have the sway bar holding all that weight up just sitting there. i mean its not much wieght but still.

and those are pollyurithane (spelling) bushing that came with the suspention technique sway bars.

and on the rotors, they are vented. i guess it just looked solid cuz of their rustyness they havent been used for almost a year, lol.



but thanks for all the complaments guys, cannt wait to go burn some civics

[Busted_Blue]

nice! Yea wheir did you get those bushings? They look like the ones from auto zone?

I believe the bushings came with the S/T Bars. I got the same bushings on my car with the S/T Bars. I tell you the front bar makes a big difference with the rear one too.

[Strugglebucket]

looks like you've been having about as much fun me. kinda sucks doing a million things at once but when you're finally done- *kaplow!*

paint on the block looks good, btw.

[Mattphi]

let us all know how the hood fits.

[HondaBoy]

yeah, that painted block looks killer! better than black or most rusty ass ones. lol. now i see why you havent put the hood on yet. that wouldnt leave for easy access.

[BlueBead]

NICE!
Going to be a crazy nice ride once you get her back on the road.
How much did that sway bar set you back?

[86LXItooFAST4me]

haha, i actually pulled the engine and replaced all the seals and painted it while i had it on the stand. i didnt paint it while it was in the car but yea, after i got through painting it i was like "hummm, i wonder if that going to look good or not" but after i got it this far i am happy with it. you can never go wrong with gray with black, lol.

and i got the S/T sway bars in a set (front and back) for like 240 shipped brand new from shox.com.

and the hood is the last thing to go on, but ill let yall know how it fits.

[86LXItooFAST4me]

and did yall know this is my 1 year anniversary with 3GEEZ?? haha, you guys are great though. i probly never would have gotten this far without this site. cheers guys!!

[86LXItooFAST4me]

I update my MOD list on vBGarage if Y'all wanna check that out

[86LXItooFAST4me]

hey i fixed my Cardomain link on my signature. so those of you that have memberships there, please come sign my guest book so i can add yall to my friend list.

[HondaBoy]

heh, paint in while its in the car. thats silly. lol. actually my friend did that on his while the head was off and the radiator and crap was out. anyway, just keep us updated on your project!

[86LXItooFAST4me]

right now i have the front "bulkhead" off. took me about 2 hours or so to drill out all the spot welds and pry it off. everything looks good sept for the drivers side lower fram support. its a little bent on one side but nothing a little heat and hammer wont fix. its going to be fun welding the new one on strait and square though, lol



I'm replacing #4 here:



https://www.3geez.com/showthread.php?t=40662

[Sabz5150]

Which cold air intake do you have, meaning what car was it meant for?

[86LXItooFAST4me]

Which cold air intake do you have, meaning what car was it meant for?

90-93 accord i believe, the only thing i dont like about it is i need more space inbetween the TB and the intake. its practacly huging my engine and a little too close to for me.

http://cgi.ebay.com/ebaymotors/ws/eB...category=33659

[88accordhb]

derek has the 90-93 da teg cai.