SE-i rear disc brakes

[$40089'accordproject]

I Found a web site that sales Se-i Rear Brakes http://www.importedcarparts.com/
well thay have alot of parts for are car's not any thing pimped but new stock parts for cheap
go 2 89-Honda-Accord-Sei-F/I and there you go

[Vanilla Sky]

you have to use the entire lower arm for the conversion... all i saw in there were things like discs and pads...

[Vinny]

Its just an online parts house and they dont seem to be much if any cheaper than the zone or advance/parts america

[accordrcr86]

Does anyone know where I can get a rear disk conversion for my 86 accord?

[Vanilla Sky]

junkyard, ebay, or watch teh marketplace here... they only came on the SEi in the states, so they are a bit hard to find...

[Busted_Blue]

why is this in the appearance forum? shouldn't it be in the suspension or market place?


basically everything in this picure borrowed it from neoblue89lxi

[accordrcr86]

I was going to place this in that section, but I saw a post that someone started about brakes so I posted my question here.

[buds302]

hey try the 89 acura legend! they look remarkably the same as the sei and the calipers fit from the acura to the sei. i havent tried it but somebody needs to!

[Busted_Blue]

hey try the 89 acura legend! they look remarkably the same as the sei and the calipers fit from the acura to the sei. i havent tried it but somebody needs to!

a 89 legend bolt pattern is 4x114. That isn't exactly 4x100. I believe someone on this board did it and has the universal 4 lug rims to mask the problem. I can't find the actual thread but it might be on the board still.


Good luck with the rest of it. I don't know about how you are going to get the ebrake cables working but there is a lot of threads made about the 89 legend.

[2drSE-i]

I ALREADY HAVE 4 WHEEL DISC CHUMPS!!!!!!!!
buahahaha
nah j/k looks great for u guys!

[Vanilla Sky]

i would bet that if need be you can get those e-brake cables new from honda...

[danronian]

Most dual-pattern wheels that fit the 3g are drilled to fit the legend size so if yours are dual patter they will probably work for you. I should look into this since at my local j/y there is a fully loaded legend that looks like the accords sitting there b/c it has a v6 so noone seems to want parts off of it.

[Busted_Blue]

These threads might help you.
https://www.3geez.com/showthread.php?t=31951
https://www.3geez.com/showthread.php?t=34994

i would bet that if need be you can get those e-brake cables new from honda...

around $80 each. fun fun fun.

[Hash_man_Se_i]

around $80 each. fun fun fun.

Damn parts for the rear discs are expensive to be careful. I had a siezed up caliper, Honda wants $400 CDN for one side hahaha.... It ended up costing me a little over $200 CDN at a parts store for both calipers, pads and rotors.

Then again, I did work at the store so I got just over cost.