Ok, one of my buds of AT chopped one of my old pics, says he cam close to a 2.25 drop in front and 2.00 in rear, compare these two pics and give me input. I know it looks much better, but Im curious if I should go lower, or even this low, thanks in advcance...
BEFORE:
AFTER:
IGNORE the BUSH/CHENEY signs, I dont want another political thread on my hands...
i only see the before pic......
Kevin
works fine for me...go HERE and look at first pic on the page if not working...the first pic is the second on here...
go lower
-Kelley
Hondas owned: 84 Accord Sedan Lx, 85 Accord Hatch Lx, 87 Accord Sedan Lx, 89 Accord Sedan Lx-i, 96 Integra Coupe Se
lower would look a little better but i think that's a good drop for a daily driver.
i mean, seeing as how you're in BUSH country you probably have the occasional gravel/dirt road to contend with
Originally Posted by Justanothermike
my A20 is not SLOW. ur A20 is slow.
dont lower the rear more than the front. wtf are people thinking when they do that.... even photoshopped that way lol...
it's just because of the way the rear fenders are on most cars. it usually has less of a gap than the front.Originally Posted by bobafett
dont lower the rear more than the front. wtf are people thinking when they do that.... even photoshopped that way lol...
Originally Posted by Justanothermike
my A20 is not SLOW. ur A20 is slow.
and? im talking about how it looks...and it looks like the front is higher than the rear in terms of wheelgap//
sorry if im not being clear, i just see it all the time, and personally i like an even or raked setup.
lower son, lower.
1 finger gap minimum
Lower...
natsugusa ya
tsuwamono domo ga
yume no ato
nice drop, it's good where it is right now.
3geez for life.
you need less of a wheel gap. if you had bigger tires, you could keep it that low, but with those small ass tires, you're gonna have to go lower then that to keep it from looking funny.
Nothin' 2 Old Racing
For a daily driver it looks good
You could always get sleeve coilovers and get like a 3" drop.
My friend did it on his civic hatchie. One finger gap. This guy said "please that's for pussy's"(pardon the language). you can't get a finger in. the bumpers are almost touching the ground. It's a daily driver. So extremely low!
For Sale:
T3/T4 Turbo, wastegate, and BOV
P75 ECU
Untouched Head
Port & Polished, 5-angle valve job, bowl and swirl job, Head -$1000 invested in machining alone
Misc.
DDR Pad and DDR Extreme
PS1
NES
Needed:
Dremel
Money
.
Its not lowered at all right now, that is just a chopped picture, when I do lower it the FRONT will be lower than the back to compensate for difference in wheelwells, giving it a raked appearance, but all the wheel gaps will be the same...just looking for input.
It looks good in the chopped pic, but i would probably go a little lower
Lower is always better!!!
For Sale:
T3/T4 Turbo, wastegate, and BOV
P75 ECU
Untouched Head
Port & Polished, 5-angle valve job, bowl and swirl job, Head -$1000 invested in machining alone
Misc.
DDR Pad and DDR Extreme
PS1
NES
Needed:
Dremel
Money
Posting Permissions
Reply With Quote
Bookmarks