earlier today i seen a an early 90s model accord and it had euros soo i was thinking would they fit my 1989 honda accord i was just asking to see if anyone knew before i go and get measurements
earlier today i seen a an early 90s model accord and it had euros soo i was thinking would they fit my 1989 honda accord i was just asking to see if anyone knew before i go and get measurements
Won't fit, different curve and different length.
they look really close, but their really not, trust me, dont waste your $$$
this is lilhonda17's car. you can see what he had to do for them to go on. as you can see, you'll need to do some body work to fill a few gaps.
Keep it HONDA. Or at least Asian.™
*Weber 32/36*Pacesetter Header*2.25 in. Cat Back exhaust*SE-i rear disk brakes
B18C swap ditched, A20 to be revived
Looking for K20/trans for ultimate swap
Yeah you will need some custom body work to get them too fit. The curve is a lot different.
please dont get "euro's". They're ugly and should be burned. All of them!!!
but seriously, dont get euros. your money would be better spent on something functional or better looking.
Nothin' 2 Old Racing
I agree!!!!. I remember like 3 or 4 years ago when they first really came out I was like man those are neat. But now they just suck!!! That's my opinion but, it is your car so do what you like not what we like.Originally Posted by NXRacer
please dont get "euro's". They're ugly and should be burned. All of them!!!
but seriously, dont get euros. your money would be better spent on something functional or better looking.
For Sale:
T3/T4 Turbo, wastegate, and BOV
P75 ECU
Untouched Head
Port & Polished, 5-angle valve job, bowl and swirl job, Head -$1000 invested in machining alone
Misc.
DDR Pad and DDR Extreme
PS1
NES
Needed:
Dremel
Money
those things are so ugly
Jay
When they first came out they were nice. But now I just think they are rice.
For Sale:
T3/T4 Turbo, wastegate, and BOV
P75 ECU
Untouched Head
Port & Polished, 5-angle valve job, bowl and swirl job, Head -$1000 invested in machining alone
Misc.
DDR Pad and DDR Extreme
PS1
NES
Needed:
Dremel
Money
running around with w/nothing but a skimpy leopard print thong and pink sandals > euros.
3geez for life.
wait. so you're saying euros are...gay?
Originally Posted by Justanothermike
my A20 is not SLOW. ur A20 is slow.
Gays that don't shave
Man that is nasty
Good thing they're always drunk.
For Sale:
T3/T4 Turbo, wastegate, and BOV
P75 ECU
Untouched Head
Port & Polished, 5-angle valve job, bowl and swirl job, Head -$1000 invested in machining alone
Misc.
DDR Pad and DDR Extreme
PS1
NES
Needed:
Dremel
Money
you guys are nasty!!
this is what you need to do with altezza/euros
http://www.ffdet.com/altezzas/
Nothin' 2 Old Racing
that great. i say you be different from every other honda and get some JDM tails. nobody else will have them except for a few other people on 3geez. and people in other countries. i'm still trying to get some, my last attempt wasnt too good since i couldnt bid on ebay. now i can.
Keep it HONDA. Or at least Asian.™
B18C swap ditched, A20 to be revived
Looking for K20/trans for ultimate swap
i totally agree!!!!
Amen to that. But, at the bottom of the page it said that no altezzas were harmed because they looked fine after the flames were out. That's not gonna fly. They need to throw some flash powder on them. Just blow the crap out of them!!!
For Sale:
T3/T4 Turbo, wastegate, and BOV
P75 ECU
Untouched Head
Port & Polished, 5-angle valve job, bowl and swirl job, Head -$1000 invested in machining alone
Misc.
DDR Pad and DDR Extreme
PS1
NES
Needed:
Dremel
Money
yea i noticed that too
but i was thinking more along the lines of m80 in the back
m80's are made of flash powderyea i noticed that too
but i was thinking more along the lines of m80 in the back
So same diff. But yup blow those suckers up!
I think its funny that the original poster stopped posting.
For Sale:
T3/T4 Turbo, wastegate, and BOV
P75 ECU
Untouched Head
Port & Polished, 5-angle valve job, bowl and swirl job, Head -$1000 invested in machining alone
Misc.
DDR Pad and DDR Extreme
PS1
NES
Needed:
Dremel
Money
more explosive i thot, concentrated flash powder lol
and thats because we were all being assholes about his taste
good goin guys, scared away another ricer!
Good ridin's
JK
But seriously it's what ever you like.
For Sale:
T3/T4 Turbo, wastegate, and BOV
P75 ECU
Untouched Head
Port & Polished, 5-angle valve job, bowl and swirl job, Head -$1000 invested in machining alone
Misc.
DDR Pad and DDR Extreme
PS1
NES
Needed:
Dremel
Money
riddance :-P
and yea everyone is pretty nice about peoples retarded tastes, except that one time when the guy had the HUGE aluminum spoiler, everyone kinda drove him away lol
OMG I thought that, that picture was just found on the internet. I didn't think the guy tried to make friends and what not.
Riddance you must be apart of those learned peoples in tha' north.
I like everything fried, covered, and smothered!
For Sale:
T3/T4 Turbo, wastegate, and BOV
P75 ECU
Untouched Head
Port & Polished, 5-angle valve job, bowl and swirl job, Head -$1000 invested in machining alone
Misc.
DDR Pad and DDR Extreme
PS1
NES
Needed:
Dremel
Money
hahaha same here, and quite the opposite actually, im from oklahoma
hahaha
Posting Permissions
Reply With Quote
Bookmarks