Floss your custom gauges

**gr3k0sLaV** · 08-03-2002, 09:24 AM

yer everyone floss your custom gauge's
here's mine

**89BlackH-Back** · 08-03-2002, 09:35 AM

are those guages in kmh??? and where did you get them

**gr3k0sLaV** · 08-03-2002, 09:38 AM

It's the metric system on this side of the world.

They are the original gauges just I replaced the stock front lighting with 2 blue LEDS and ive repsrayed the bezel.

**89BlackH-Back** · 08-03-2002, 09:42 AM

whoa so the numbers are clear you jus put different lights behind them, and whats the bezel you sprayed??

**gr3k0sLaV** · 08-03-2002, 09:49 AM

well I removed the stock lights and took the blue condoms off them and and replaced them so my numbers were cleared, funny thing is the blueish light isn't from the condoms but the clear numbers cause the light to be blue.

Im eventually gunna remove the stock lights and replace them all with blue LEDS.

**gr3k0sLaV** · 08-03-2002, 09:50 AM

to see my repainted gauge bezel look at my daytiem photos of my car in the Pics section, cant be stuffed posting them again.

**hondaaccord_86** · 08-03-2002, 06:28 PM

here are my gauges:

**3rdgenSLIMER** · 08-04-2002, 08:22 PM

go with the reverse indiglow from procarparts!

**Coitis1** · 08-05-2002, 11:59 AM

so with the white face gauges that u make urself do the lights not shine through the paper?? just curious...

**pimp86LX** · 08-05-2002, 12:10 PM

don't worry man, we got the metric system here too
!!!

**hondaaccord_86** · 08-05-2002, 09:28 PM

the light does shine through, but its very hard to light up the numbers the you printed on the paper with the light that shines through. so i put duct tape on the back of the printed gauges.

**87Hybrid** · 08-06-2002, 02:24 AM

**gr3k0sLaV** · 08-06-2002, 04:14 AM

Originally posted by 87Hybrid

FUCK HOW DID YOU DO THAT?!?!?!?!?

**89BlackH-Back** · 08-06-2002, 05:37 AM

thats exactly what the bezzel in the car i jus got looks like, id rather have it black tho

**87Hybrid** · 08-06-2002, 06:08 PM

I use the stock bezel as a template and drill out the holes close to the edges and clean them up with my High speed air dremmel with a spiral bit on it and use a small file to make the corners of the Idiot lights. I then sand and polish it.

**Sabz5150** · 08-07-2002, 08:10 AM

BAH! owned by the sexy red X.

-5150

**Sabz5150** · 08-07-2002, 08:12 AM

Trying again.

**hondaaccord_86** · 08-07-2002, 02:32 PM

ready for take off!!! damn i want a stick... just so i can get the big rpm gauge.

**hondaaccord_86** · 08-07-2002, 02:33 PM

j/k man. i like the arrangement of gauges

**gr3k0sLaV** · 08-07-2002, 06:51 PM

you dont need a stick for a big RPM gauge,
ive seen plenty of people with auto's using them.

**Sabz5150** · 08-08-2002, 10:59 AM

I don't need a monster tach... stock tach does me good enough.

If you're wondering, the gauges to the left are manifold vacuum and air/fuel ratio. The light to the right is a Proform standalone shift light that's adjustable in the back from 3,000 to 12,000 RPM.

I have a triple gauge pod that is going on the dash directly in front of the clock. I currently have an Oil Pressure and Fuel Pressure gauge for it. Don't know what other gauge I'll need... probably a voltmeter.

eBay owns me.

Pic of gauge pod:

-5150

***88turboaccord*** · 08-08-2002, 01:03 PM

**Mike89Accordcom** · 08-08-2002, 03:05 PM

shit, heres mine,

**Chubs87Accord** · 08-08-2002, 04:25 PM

i ade soe seriously nice gauges (to me at least) but i can post pics... anyone wanna do it for me?

**Chubs87Accord** · 08-10-2002, 12:45 AM

used yahoo for the pics... here are mine... ill put up pics of them on my car when they get there, lol

http://photos.yahoo.com/bc/xxchubsxx...87+accord+BABY