I live In EugeneOriginally Posted by NXRacer
I live In EugeneOriginally Posted by NXRacer
Good luck man let us know how much HP you'll be running if you are sucessful.
hey, when you pull your motor will you sell me you mounts and axils
im me or call 617-593-1570 or nextel direct connect 180*11*53733
Style Quality Uniqueness And Design
S.Q.U.A.D. Engineering
www.squadengineering.com
http://www.facebook.com/squadengineering
if its anyhelp check out honda-tech.com, someone on there created an adpter plate that will allow you to use a bseries tranny with the h22, i think it was only loke $80 or so so that way you can use a 90-93 b series cable tranny
Style Quality Uniqueness And Design
S.Q.U.A.D. Engineering
www.squadengineering.com
http://www.facebook.com/squadengineering
looks to me all he did was reweld new mounting points on the chassis and used stock h22a mounts. i'm curious to see what he did about axles, wiring, and shift linkage. the bad part is that there is no room in the belts for accessories like power steering and a/c. on the other hand, looks like alot of room for turbo up front. an h22a turbo would be nice.Originally Posted by SteveDX89
Last edited by ICEMAN707; 02-19-2005 at 08:44 AM.
i am putting the motor in my si crx and as for the h22 tranny adapter plate, no use my car has a hydro clutch. as for the axels i'll probably keep them incase i ever want to put the b16 back in plus the axels i believe are different than the cable tranny. but if i ever deside to!Originally Posted by h0ndavtec
so if your putting the motor in your crx wouldent you use crx searies mounts and not the same ones in your accord?
Style Quality Uniqueness And Design
S.Q.U.A.D. Engineering
www.squadengineering.com
http://www.facebook.com/squadengineering
correcto but.. my mounts are custom and they will also be used for the h22, i just have to move the rear one over an inch and a half
damn man you need to go to one of our next meets or I might just have to drive up there, gotta see it in action.
I'm your local R&D nut. Fabracting, welding, tuning and breaking my stuff so you don't have to.
geez, i dont get no love
Style Quality Uniqueness And Design
S.Q.U.A.D. Engineering
www.squadengineering.com
http://www.facebook.com/squadengineering
yea u should come down here or or maybe i'll go up there or somthinOriginally Posted by Justin86
i just raced an INTEGRA Type R Tonight and i beat him by a car length. pretty nice for a b16 accord with slight mods.
oh i can't wait to get the h22 in.... i'm looking for a f22 to fit in the accord for engine mount placement while the h22 bottom end is being built so i should get one here by the first week of march, which will be when i rip out the b16 and start taking pictures of the f22/h22 swap.
Something is off with that. I can't beat a GS-R with more mods than you. It had a few mods too. Granted it was only a car length or 2 but I'm also in a coupe. Or else mine just sucks.Originally Posted by lilhonda17
No projects. Life consumes my time and money.
wow i have never been beat by a GS-R. are your cams tuned? they hp gain i noticed came from my cams and my valves. stock cams
i've heard that coupes weigh more, there is suppose to be a heavier support beam between the driver and the back seat. bu i dunno. my car weighs 2400 with me out of it and 2500 with me in it.
Well, damn you're a bony bitch. Mine weighs about the same as yours but I weigh 180. My engine is not tuned at all. Burns oil and runs rich. Still pulls better than an A20.
No projects. Life consumes my time and money.
lol yea a buck 20. get ur shit tuned and you will pull so much harder, I PROMISE!
I just raced a 240SX with a SR20 Motor in it and it was turboed @ 6psi. It was hella fun. we took off i burned out for like i swear it felt like forever i kept letting off the gas and pressing on it again, but when i finally caught traction he was a car length ahead and that's where he stayed, we raced back and he let me get a car length ahead and that is where i stayed till the very end heulled hard and passed. so yep i got smoked fuckin wit a 240sx sr20 powered by turbo
do you have your aim on? aim me
Style Quality Uniqueness And Design
S.Q.U.A.D. Engineering
www.squadengineering.com
http://www.facebook.com/squadengineering
whats the story with the H22 swap?
Nothin' 2 Old Racing
I have an f22a block you can use, im in the portland area, come get it for free. as long as you drive up in that b16 powered 3gOriginally Posted by lilhonda17
the block is gutted, so it weighs like nuthing, i have all the insides but its already taken apart so it would be easyer to manauver(sp?)
yea im interested... give me ur number i'll call u this week i work monday tuesday, my buddy needs to go up there so let me know when u are free.
Sometime today this Hombre should be here He got kinda lost on his way ahaha, headed towerds hood river, now he hasnt called in 2 hours!Originally Posted by lilhonda17
I thought i was good at explaining directions
damn, this is the best thread in a while! im really interested in the axle situation...
I havent forgotten my roots
Bookmarks