Ground Control Koni adapters

[EricW]

I thought I would post the pics of the koni adapters to turn the koni's in to full bodied coilovers since I have never seen them on here before and only could find one mention of them and so everyone else would know what they looked like.









If you order your Ground Controls new and tell them what type of shock/strut you are using they will provide any other parts like these that will fit your shocks. Since i got mine used I had to order them seperatly.

[EricW]

oops!

[YK86]

Sweet! Never seen those before. Mind if I ask what the part number is?

[EricW]

There is not a part number on the part or the packing slip or the instructions. But the instructions they sent me were for a 90+ accord. They were $25 dollers each my order was $115 with 3 day shipping. I just called ground control and talked to the guy on the phone and told him what i was looking for and he looked them up. I had emailed them first but the guy said it would be better to call and talk to Ben but when i called he was on lunch. Hope this helps.

[YK86]

Thanks for the info. I might be interested in the future.

[NXRacer]

thats freakin tight! and Koni will revalve their struts just like bilstein(sp).

one question tho, what holds the perch to the strut body??

[EricW]

one question tho, what holds the perch to the strut body??

The perch has a small black ring inside that sits right on the snap ring. The black piece has a small notch all the way around so it covers the ring just barely.

Heres a pic (you can see the small black ring on the two in the middle)


I put them on yesterday as long with doing the to rear ball joints. I started at 4:30 and got finished about 12.

*edit* well car domain is having problems heres the page the pic is on, it is the one on the very bottom of all the coilover pics. www.cardomain.com/memberpage/673064/3