Results 1 to 20 of 20

Thread: LED window washers

  1. #1
    LX User
    Join Date
    May 2002
    Vehicle
    1994 Honda Accord, saving up for 2004 Subaru WRX
    Location
    Massachusetts
    Posts
    374

    Question LED window washers

    alright i bought two green LED winshield washers ... the only thing is i done know how to remove the origional washers! how do you get teh damn things off? thanks!
    ForSale!
    88Accord LX AUTO
    NEEDS:
    Transmission
    Tires
    Altinator
    Belts
    Battery
    PERFECT Maroon Interior

    Call or Contact Dan @ 1-617-893-8320 or E-mail at [email protected]



  2. #2
    LX User
    Join Date
    May 2002
    Vehicle
    1988 honda accord lxi coupe
    Location
    ny
    Posts
    126
    unhook the hoses from under the hood and then jsut take a pair of pliers and rip the shit out of them to get them off lol
    L'amore Mangia e l'italiano Vivo
    http://www.geocities.com/sbullet46/88accordlxi.html

  3. #3
    LXi User 89AccordLXI666's Avatar
    Join Date
    May 2002
    Vehicle
    1989/Honda/Accord SE-i FI 5speed Coupe
    Location
    Hudson Mass
    Posts
    771
    or u can use a flat head screwdriver and pop it off inderneith the hood... good luck. :-)
    I will alwayz drive my 3rd gen Accord, ya'll will neva c me driving a 4 door Ford.. lol

  4. #4
    SEi User Y3G's Avatar
    Join Date
    Aug 2002
    Vehicle
    05 G6 for now
    Location
    Niagara Falls Ontario
    Posts
    1,737
    Your a brave man. I'v instaled a set of blue squirter on to my ride
    the stock one pop out with no problems. the LED ones you have to bolt into a hole about the size of a loonie* and about 1.5' deep when instaling these I highly recomend DEEP SOCKETS and if you wire them into your parking lights keep a eye out for blown fuses!!! I went though about 4 or 5 until I got it right!

    *a loonie is a canadian $1.00 coin aprox. 1 3/8'' round

  5. #5
    LX User 89accordlxi's Avatar
    Join Date
    Apr 2002
    Vehicle
    see user name
    Location
    IA
    Posts
    430
    The originals are held on with some sort of metal clip from underneath. Just us a flat head and get in there and bend the tabs. Then they should slide right out. In order to get the new ones on, I used a dremel with a sanding bit and enlarged the whole just enought for a socket to fit in. After that, it should be no problem bolting the new ones in.

    Good luck.

    Peace out...
    89 Lx-i
    Performance: K&N filter,custom CAI, Accel coil, MSD 6aL ignition, magnecor wires, high flow injectors, FPR, sport exhaust,Tokico springs/struts
    Appearance: white gauges, side markers, headlight conversion, clear bumper signal/fog light conversion, SE-i center armrest and cupholder, SE-i leather seats
    17" ADRs with 205/40/17 khumos
    future plans: 16" or 17" rims(can scratch that one off the list 9-12-02), headers-high flow cat.-cat back piping. Rear disc brakes from SE-i, reground cam.

  6. #6
    LX User 3rdgenSLIMER's Avatar
    Join Date
    Apr 2002
    Vehicle
    1989 Honda Accord Lxi
    Location
    Longview, Texas
    Posts
    155
    well, i would say something, but you guys already did it.
    1989 honda accord lx-i. APPEARANCE: 17" eagle alloy racing rims series 169. onsoku racing coilovers for a 90 accord, suicide trunk, green LED undercarraige kit (scans, strobes, beats to music, and solid), 1 20" green lava tube, 3 20" green neons, 2 9" mini green neons, 1 15" lightining rod, 1 10" green neon, neon green racing pedals, 2 green interior strobes, set of headlight strobes in trunk, 1 15" tourquoise in trunk, green LED windshield squirters, reverse indiglo gauges. PERFORMANCE: J-SPEC A18 ENGINE, stage 1 clutchmaster clutch, tenzo r muffler, 2 1/4" piping, custom cold air intake, with ractive filter. AUDIO: jvc kamelion cd player, jenson 6x9's, jenson 6 1/2's

    **The 3rd Gen formally known as radioactiveaccord/weetoddedd**

  7. #7
    SEi User gr3k0sLaV's Avatar
    Join Date
    Feb 2002
    Vehicle
    1998 VT Commodore 50th Anniversary Edition
    Location
    Geelong, Australia
    Posts
    1,457
    ive got it, i use special glue to hold it in,

    the original were held in for me by clips, go look at my night time photos to see how they look i love 'em
    Cocaine's A Helluva Drug! - Rick James
    I really fracked things up for you Bill - Colonel Tigh
    Girl we couldn't get much Higher! - Light My Fire

  8. #8
    2.0Si User pimp86LX's Avatar
    Join Date
    May 2002
    Vehicle
    2005 Mazda 3
    Location
    Ontario Canada eh.
    Posts
    3,996
    are these suckers still functional? i was thinkin about getting them back in the day...ya know before everyone over played them, but someone once told me they don't actually work....i think he was talkin out of his ass though

  9. #9

    HostileJava's Avatar
    Join Date
    May 2002
    Vehicle
    03 Accord V6, 98 and 99 Odyssey, 99 Blazer
    Location
    Northampton, PA
    Posts
    6,527
    The ones I have light up and squirt and I think they look better than the stock ones since there chromed.

  10. #10

    87accordlxph's Avatar
    Join Date
    Apr 2002
    Vehicle
    Carbed 1987 Honda Accord LX & Black 4th gen Accord (91)
    Location
    Petrolia, Ontario Canada
    Posts
    529
    All you do is pop the stock ones straight thru the hood directly up and yea your gonna have to grind a hole big enough to put a socket up in the hole underneath the hood.
    Mike's Clean Cnd A20A2 5 spd Champaigne Beige Sedan Accord, Eh!
    B-Day: 07/87 in Alliston, ON Canada

    ---------------------------------------------------------------
    The best mods are mods that can be modded over and over again.

  11. #11

    87accordlxph's Avatar
    Join Date
    Apr 2002
    Vehicle
    Carbed 1987 Honda Accord LX & Black 4th gen Accord (91)
    Location
    Petrolia, Ontario Canada
    Posts
    529
    Originally posted by yellow3g
    Your a brave man. I'v instaled a set of blue squirter on to my ride
    the stock one pop out with no problems. the LED ones you have to bolt into a hole about the size of a loonie* and about 1.5' deep when instaling these I highly recomend DEEP SOCKETS and if you wire them into your parking lights keep a eye out for blown fuses!!! I went though about 4 or 5 until I got it right!

    *a loonie is a canadian $1.00 coin aprox. 1 3/8'' round
    Tell me your secret! What size of fuse was it that worked?
    thx

    -Mike
    Mike's Clean Cnd A20A2 5 spd Champaigne Beige Sedan Accord, Eh!
    B-Day: 07/87 in Alliston, ON Canada

    ---------------------------------------------------------------
    The best mods are mods that can be modded over and over again.

  12. #12
    LX User
    Join Date
    May 2002
    Vehicle
    86'Honda Accord Lx-i
    Location
    Kansas City, MO
    Posts
    247
    Cool Nozzle Lights man!!! Those are so cool and NOT PLAYED OUT!?! Every mofo out there has those now and you can buy them at like every auto store now. They're almost as played out as much as the Gay aluminum spoilers, if not more. You'll look like every other civic, probe, and focus on the road. They do alot of good for lighting too, Not to mention the 15HP they give ya. Awesome job man!

    Chris
    *1986 Honda Accord Lx-i* 5-spd.
    17" Konig Maxxum Cam 178's wrapped in 205/40/ZR17 Kumho Ecsta Supras, Eibach Sportlines, Tokico struts, 92-95 civic custom short ram air intake, Magnaflow streetseries exhaust, 20% tint all around, Red/Black taillights, painted calipers and drums, hyperwhite corner bulbs, blue interior lights, Racing pedals, Carbon fiber shift knob

  13. #13
    LXi User 88Ex-i's Avatar
    Join Date
    Apr 2002
    Vehicle
    1988 Honda Accord Ex-i (sold), 1994 Honda Accord EX-R
    Location
    Sechelt, B.C.
    Posts
    566
    each to their own on this one, but i agree with chris68lxi here, and that they are becoming played out like aluminum spoilers. I see so many cars with them nowadays, although i think they look good on some done out cars, they are not my cup of tea.
    MBowe#19
    Hondasport19 on Vancouveraccords.com

  14. #14
    LX User
    Join Date
    May 2002
    Vehicle
    1988 honda accord lxi coupe
    Location
    ny
    Posts
    126
    they r getting played out but i still like the jsut casue the crome looks better than the black, and u dont have to grind the hole bigger u can but i just took a pair of pliers and bent it back it bends really easy. and originally i had them run to the rear defroster fuse but after i installd my system i just got the power from the power cable i ran to the amp.
    L'amore Mangia e l'italiano Vivo
    http://www.geocities.com/sbullet46/88accordlxi.html

  15. #15
    LX User
    Join Date
    May 2002
    Vehicle
    '96 BLAZER, '85 ELCAMINO
    Location
    chicago, il
    Posts
    211
    FORGIVE ME FOR SAYIN' THIS, BUUUT THOSE THINGS LOOK :gay: TO ME. THAT JUST ONE MANS OPINION...
    YOU CAN'T CALL IT IF IT KICKS YOUR %$#

  16. #16
    SEi User toastyghost's Avatar
    Join Date
    Mar 2002
    Vehicle
    a 93 z34 that's getting parted out, an 86 accord lx that now lives in a j/y, and a 90 camry le that the state no longer allows me to drive. soon to be replaced with an aprilia rs50 or a derbi gpr.
    Location
    Harrisonburg VA
    Posts
    1,316
    dat =

    haha j/k my friend has those they look dope

    We call them the "bling bling" lights BWAHAHHAHHA god mommy why me so durnk
    ~<+045+ygH05+>~

  17. #17

    OldSchoolSwap's Avatar
    Join Date
    Apr 2002
    Vehicle
    88 Hybrid Accord LX-i
    Location
    Miami, Florida
    Posts
    2,639
    One of the ugliest mods in my opinion.
    http://vtecnos.tripod.com

    Member Since 7-9-01

  18. #18
    LX User
    Join Date
    May 2002
    Vehicle
    '96 BLAZER, '85 ELCAMINO
    Location
    chicago, il
    Posts
    211
    to each his own, butut:
    YOU CAN'T CALL IT IF IT KICKS YOUR %$#

  19. #19
    SEi User jigga225's Avatar
    Join Date
    May 2002
    Vehicle
    87 3G RIP, 95 KA7, 95 5G Coupe
    Location
    Louisiana
    Posts
    1,208

    ummmmmmmmmmmm.. NO

    chrome on the hood = NO.
    My girl has a 98 green civic with green ones and they are ok on her car
    But not the 3G to me

    Just as bad as those chrome fender hips people used to screw on in the 80s.

  20. #20

    87accordlxph's Avatar
    Join Date
    Apr 2002
    Vehicle
    Carbed 1987 Honda Accord LX & Black 4th gen Accord (91)
    Location
    Petrolia, Ontario Canada
    Posts
    529
    I personlly think that they are a good mod for the price..better than stock IMHO. Even if they aren't spliced. Still look cool.

    -Mike
    Mike's Clean Cnd A20A2 5 spd Champaigne Beige Sedan Accord, Eh!
    B-Day: 07/87 in Alliston, ON Canada

    ---------------------------------------------------------------
    The best mods are mods that can be modded over and over again.

Similar Threads

  1. Where'd These Washers Go Again?
    By firefighterwhite89 in forum EFI Tech
    Replies: 15
    Last Post: 12-22-2010, 01:53 AM
  2. poly washers on UCA bolts
    By w261w261 in forum Suspension/Wheels/Tires/Brakes
    Replies: 7
    Last Post: 06-08-2009, 07:37 PM
  3. thrust washers
    By newaccorddriver in forum 3geez Accords
    Replies: 10
    Last Post: 10-17-2006, 07:53 PM
  4. Fuel filter washers???
    By maxsideburn in forum 3geez Accords
    Replies: 9
    Last Post: 01-29-2006, 12:38 PM
  5. LED washers
    By TREVOR in forum Interior & Exterior Care
    Replies: 16
    Last Post: 12-09-2002, 07:34 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink