Budget T/B swaps!?

[hondamanlxi]

im to the point where i need a 60+ mm t/b, but i dont have 300 bucks for one... so far this is my research

1)A jeep grand cherokee t/b is 60mm and the TPS should work (cant find one)
2)A 2nd gen b16a motor comes with a 60mm (never find a real one)
3)A b18c comes with a 63mm (hahah yeah right)
4)most all t/bs can be made to bolt up the same (very similar bolt holes)
5)ALL tps setups are damn near the same(especailly dodge!swap sensors and thats it)
6)On all the neon forums, peeps are using mustang t/bs( i know i can make a neon t/b work on an a20)


if you guys got any budget t/b ideas im listening! Id really love for this to turn into a cheap mods for all f/i cars

[Vanilla Sky]

4gee accord is a direct swap for you

[bobafett]

seriously a 4g TB will bolt up to a b16 manifold? sob i have to finish this mod now..

[hondamanlxi]

why would i want a 4th gen t/b? its no bigger... im trying to AVOID an aftermarket t/b b/c their 300 bucks

[Vanilla Sky]

i thought it was larger...

[A20A1]

found some cheaper TB from $50 to $200

http://cgi.ebay.com/ebaymotors/ws/eB...tem=7945392665

http://cgi.ebay.com/ebaymotors/ws/eB...tem=7946131718

http://cgi.ebay.com/ebaymotors/ws/eB...tem=7945739773

[A20A1]

Here is that thread on the Over bore 4G TB
https://www.3geez.com/showthread.php?t=31853

[Strugglebucket]

you can always have a shop bore out the stock tb. cost me $150.

unless of course you feel the need to go bigger than 60mm.

[thegreatdane]

I have a B16A2 manifold and the TB on that is 62mm if i recall correctly. In the US those engines are from the del-sol's so you should be able to get one of those I should think.

[1988starter]

I have a 62 mm 4 g one will bolt to a 88,89 manifold 150+shipping

[smufguy]

hey honda man, what kinda manifold are you running? its a B series manifold right?

check to see if the tps puts out the same specs as the stock one to keep ur ecu happy.

[hondamanlxi]

You can now check the how-to's for this! I finally got one and got it to work!