I've been using Ingalls front camber kit for awhile now, but these Goldline camber kits are nice!
I dunno if it's the whole A-arm assembly though. Could be just the hardware. But nice nonetheless.
I've been using Ingalls front camber kit for awhile now, but these Goldline camber kits are nice!
I dunno if it's the whole A-arm assembly though. Could be just the hardware. But nice nonetheless.
The picture if from a 90+ Accord
Anything that looks like the 3G arm on picture?. The idea should remain the same tough. You get a different mounting point for the upper arm. The Ingalls isn't bad at all since you can adjust it precisely instead of 2 single positions.
How much does it cost?
This kit will give a better adjustment tough.
https://www.3geez.com/showthread.php?t=39003
http://pages.videotron.com/omus
3geez member since July 12 2000
I need these parts!
https://www.3geez.com/forum/showthread.php?t=67742
http://www.matrixracing.com/SBI89+accordSch1DepCDep.htm
It's $115 for that camber kit. But yeah, you're right that pic is from a 90-93 Accord. I don't know what the 86-89 Accord kit will look like. The Ingalls one I have are pretty good. Lasted me 2 yrs. now. But still not enough adjustment for a 2.25" drop (on Sprint springs). I still have some slight negative camber at max setting... but a little negative camber is good for cornering anyways. In order to get 0 camber with a 2.25" drop, you probably need a 2nd gen Prelude A-arm mod in conjunction with the Ingalls kit or vise-versa. Using one or the other won't work. Has to be both to get full adjustment to 0 camber.
For the rear, these look sweet though:
http://www.matrixracing.com/images/i...arge/GLarm.jpg
But at $250, I'd rather just use washers for the rear. But I don't have a major camber issue for the rear though. Just very little negative camber which helps the 18x8 inch wheels tuck in under the rear fenders.
Last edited by ICEMAN707; 03-28-2005 at 12:18 PM.
Looks good, glad to see there is finally something out there for our cars... now we need better shocks so that we can dump our cars AND have good alignment.![]()
My Project thread https://www.3geez.com/forum/project-c...dan-build.html
My Flickr: http://www.flickr.com/photos/jdmca5/
I got the ingalls kit AND prelude arms... Now my alignment sits pretty.
I even remember seeing a polished stainless steel DC sports header for a 84-87 2nd gen Lude and 3g Accord once. I was gonna get it but it's like $500 whereas the standard ceramic coated one is only about half that price. Only one site I know of sells it when I bought my ceramic coated one. But I lost my bookmark for it when my computer crashed a couple years ago and lost everything I had in it.Originally Posted by Hash_man_Se_i
![]()
Last edited by ICEMAN707; 03-28-2005 at 05:45 PM.
Bookmarks