Results 1 to 21 of 21

Thread: Car slowing down....

  1. #1
    LX User dhcarss's Avatar
    Join Date
    May 2002
    Vehicle
    68rs camaro, 89 formula 350
    Location
    Bessemer, Alabama
    Posts
    385

    Car slowing down....

    Ok , Ive taken my car to the track, and all I have changed is the intake, no more cold air, just strait off the intake, And my times are way off, went from 10.7 in the 8th to 11.00, what the fuck!! shouldnt make that much difference... Im thinking that mabe my fuel pump may be getting weak, only has 216k on it. Does it sound like that could be a possible problem to anyone... I dont have a fuel press guage, Also I think I read somewhere that you could use the fuel pump out of the prelude, Is this an upgrade? if so what years...



  2. #2

    A20A1's Avatar
    Join Date
    Sep 2001
    Vehicle
    2006 Chevy Cobalt LS
    Location
    Kaneohe, Hawaii, United States
    Posts
    88,734
    hmm well did you disconnect vacuum hoses when put in the intake?
    - llia


  3. #3
    LX User dhcarss's Avatar
    Join Date
    May 2002
    Vehicle
    68rs camaro, 89 formula 350
    Location
    Bessemer, Alabama
    Posts
    385
    No, Im going to try messing with the timming after reading that other post about the same problem...

  4. #4
    SEi User
    Join Date
    Jun 2001
    Vehicle
    88 lxi coupe
    Location
    gainesville, fl
    Posts
    1,999
    dhcarss: did u try again with the cold air?
    try putting the piping from the tb as far from the heat of the engine but without the cone filter at the end, work wonders for me
    reset the ecu, might help

  5. #5
    LX User dhcarss's Avatar
    Join Date
    May 2002
    Vehicle
    68rs camaro, 89 formula 350
    Location
    Bessemer, Alabama
    Posts
    385
    Im going to, just need to get someone to bend my pipe.... Havent tried it with out the air filter though, will have to do that. thanks

  6. #6
    DX User
    Join Date
    Sep 2002
    Vehicle
    1987 Honda Prelude 2.0 Si
    Location
    Knoxville, TN
    Posts
    1

    Prelude fuel pumps

    The best thing for you to do on the fuel pump would be to go to your local honda shop and have them pull the honda part numbers for the 87 prelude Si and your accord and see if the fuel pumps match. Most likely they do, but I'm not sure how the tank is on the accord. Also, the prelude has two fuel filters. I'm not sure if the accord has both, either.

    As for the loss of time on the track, it may also be due to spinning your tires out a bit more than previously. usually a CAI helps with horsepower, but a short ram will bump up the torque. The torque might cause you to be losing some grip if you're just running stock sized tires (i think they're 185 on the accord, just like the prelude). I've got 205 series tires on my car and I still manage to make them spin a good bit on launches. Some spin is good (tires get maximum grip at 5-10% slip) but excessive spin will lose you time.

    There's a lot more factors that go into it.. and your post is a bit vague. You should always run the track 3 times and get an average of your runs, and see how varied they are. If you've got a lot of time diference in the best and the worst run.. then you need to work on becoming a better driver before worrying about making your car better. If you think of anything else on this, just post back here.

    J

  7. #7
    LX User My 89 Accord Lxi's Avatar
    Join Date
    May 2002
    Vehicle
    1989/Honda/Accord LXi
    Location
    North Carolina
    Posts
    371
    ur running 10's on a 3gee? what do u have done to ur car?

  8. #8
    LX User dhcarss's Avatar
    Join Date
    May 2002
    Vehicle
    68rs camaro, 89 formula 350
    Location
    Bessemer, Alabama
    Posts
    385
    I have the pacesetter header, intake cleaned out the converter, msd coil, taylor wires, and the springs helped with the launch, my best is 10.65 in the 8th, and a 2.18 60 foot, Thanks for the info niphty, very good info, never thought about the intake differences like that, about shorter giving more torque, and so on, I put the cold air back on, but havent been back to the track, will let you know what happens. thanks again.

  9. #9
    LX User dhcarss's Avatar
    Join Date
    May 2002
    Vehicle
    68rs camaro, 89 formula 350
    Location
    Bessemer, Alabama
    Posts
    385
    Well, I ran last night, my best last night was 10.9, thats with the intake on, and now I have a new muffler, but I did also add the new wheels and Im thinking that my hole problem now is my clutch, I mean I thought these things would last forever. haha. I have to say I have put this clutch though some shit. Im suprized it still drives. But I guess I will try to get my prelude trans fixed and then put it in along with as clutch.

  10. #10
    3Geez Veteran smufguy's Avatar
    Join Date
    May 2002
    Vehicle
    10/Honda/Ridgeline
    Location
    NJ
    Posts
    7,202
    how the hell would someone with a FWD with almost a bone stock car run 10s quarter mile. hell, i cant even get my 4g running 10s in 0-60mph.

    Dude, u need to list all the shit that u put on ur car and what u did and what ur doing. so that we can do it too. U got pics? post em dude, we wanna see our 3g brother kicking some sweet ass.

  11. #11
    SEi User
    Join Date
    Jun 2001
    Vehicle
    88 lxi coupe
    Location
    gainesville, fl
    Posts
    1,999
    1/8th 1/8th 1/8th

  12. #12
    3Geez Veteran AccordEpicenter's Avatar
    Join Date
    Nov 2002
    Vehicle
    1988 Honda Accord LX-i Turbo 2004 Acura TL 6 speed/navigation
    Location
    Ridin Dirty in New York
    Posts
    7,377
    Those are nice 60 foot times, what tires/suspension are you using?
    429whp 362wtq A20 TURBO. A20T>*

  13. #13
    LXi User
    Join Date
    May 2002
    Vehicle
    accord HB ( metallic green)
    Location
    B.C Chilliwack
    Posts
    632
    ya mean nice 660 ft run .lol
    Ya that would be fun, i'm definetly gonna try the track out in the spring
    89 efi conversion
    17" katana, lude arms, full 2" exhaust/hollowed cat, Ractive intake, centerforce dual friction, msd coil/wires

  14. #14
    LX User dhcarss's Avatar
    Join Date
    May 2002
    Vehicle
    68rs camaro, 89 formula 350
    Location
    Bessemer, Alabama
    Posts
    385
    That was with grandspirit aqua flows on stock wheels. I also put some spring helpers in the rear springs to stiffin it up.. worked pretty good.. I cant wait to get my clutch in and try a good run with the zex kit.. My 60 ft times will be shit with that..

  15. #15
    LXi User
    Join Date
    May 2002
    Vehicle
    87 4dr lx, 91 CRX Si, 92/civic/hb si, 94 mustang GT conv.
    Location
    b'ham AL
    Posts
    626
    Why does this topic have a rating and the rest do not?

    Well I'm guessing you fixed you slowing down problem now. LOL
    87 4dr LX "It was FREE"
    91 CRX Si it was only $500 hehe

  16. #16
    Banned
    Join Date
    Nov 2002
    Vehicle
    87 Honda Accord Lxi
    Location
    Tempe, AZ
    Posts
    193
    he dont run the quarter mile he runs 1/8 mile, i know im late but still, no one said it so i am

  17. #17
    SEi User
    Join Date
    Jul 2002
    Vehicle
    '89 Accord LXi Coupe w/Sunroof
    Location
    Santa Clarita, CA
    Posts
    1,730
    Originally posted by SiCReX
    he dont run the quarter mile he runs 1/8 mile, i know im late but still, no one said it so i am

    your later than you think. Anchovies already said that a few post above.
    ACT Stage 1, Short Ram Intake & 2.25 Dynomax custom catback w/4inch carbon fiber tip. Thats it for now.

    Putting the paint back on after

    SOMEONE STOLE MY PAINT!!!!!


  18. #18
    SEi User
    Join Date
    Jun 2001
    Vehicle
    88 lxi coupe
    Location
    gainesville, fl
    Posts
    1,999
    Originally posted by anchovies
    1/8th 1/8th 1/8th
    Three times!!

  19. #19
    Banned
    Join Date
    Nov 2002
    Vehicle
    87 Honda Accord Lxi
    Location
    Tempe, AZ
    Posts
    193
    fuck

  20. #20
    LX User safeel's Avatar
    Join Date
    Nov 2002
    Vehicle
    87 Accord EXI PGM-FI 12 valve, slammed with 15's
    Location
    England
    Posts
    119
    :lol :lol :lol
    Ride wit us or collide wit us
    :badass:

    MY OTHER RIDE IS YO BITCH

  21. #21
    SEi User Mantis88LX's Avatar
    Join Date
    May 2002
    Vehicle
    97 Dodge Neon
    Location
    Athens AL
    Posts
    1,798
    did those spring helpers help much? i want to stiffin up my rear springs so it doesnt sqaut as much when i launch. also did u have to raise it any? is it the square black hard rubbers ones? or those metal ones?

    thanx

Similar Threads

  1. 86 LX-i sputters then stalls when slowing/stopping
    By Sh4d0w in forum 3geez Accords
    Replies: 22
    Last Post: 09-25-2009, 07:21 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.
     
Links monetized by VigLink