Your right. That was the point of the modd "shaving it" smoothOriginally posted by MSIAccord_LXi
Well, they look completely straight, looks like there was no trim there ever, is that right? or is that picture right there just hard to tell the trim?
Your right. That was the point of the modd "shaving it" smoothOriginally posted by MSIAccord_LXi
Well, they look completely straight, looks like there was no trim there ever, is that right? or is that picture right there just hard to tell the trim?
Yo Juan.... Go to the paint shop by the correction place and court on 27 i think tell him what you want to do what paint you want and all hes real good and cheap... good price + Good Job = Happy Juan hehehehehe try him out man you never know.... he going to shave my doors take out the rust from my trunk completely by cuting out the area thats rusted and puting a new sheet of metel on it and my trunk needs a new canal for the water not to go in the trunk hes gonna do that as well, paint any color i want no matter what color, except chameleon, all for $1,000 i even told him about my lip on te front bumber and hes going to make the lip blend into the bumber so the bumber looks as one peace... I dunno it all sounds good to me , what does everybody else think????
Please don't tell me your gonna slap the camaro lip! It just doesn't flow well, heck i'll even sell you my CRX lip for god sakes!!!Originally posted by Guyver007
Yo Juan.... Go to the paint shop by the correction place and court on 27 i think tell him what you want to do what paint you want and all hes real good and cheap... good price + Good Job = Happy Juan hehehehehe try him out man you never know.... he going to shave my doors take out the rust from my trunk completely by cuting out the area thats rusted and puting a new sheet of metel on it and my trunk needs a new canal for the water not to go in the trunk hes gonna do that as well, paint any color i want no matter what color, except chameleon, all for $1,000 i even told him about my lip on te front bumber and hes going to make the lip blend into the bumber so the bumber looks as one peace... I dunno it all sounds good to me , what does everybody else think????
Paint job is the last thing on my mind right now, but thanks for the offer. Also i thing PPG or Dupont will run about $1000 paint only!
Like i said before "I want the best out there"!
I didn't realize it was written off, i thought it was in a bit of an accident, but didn't it was gone. I guess see your sig all the time made me think ya still had it. Well good luck on project # 2
89 efi conversion
17" katana, lude arms, full 2" exhaust/hollowed cat, Ractive intake, centerforce dual friction, msd coil/wires
Well, the sig also states "RIP May 14"Originally posted by GreenMachine
I didn't realize it was written off, i thought it was in a bit of an accident, but didn't it was gone. I guess see your sig all the time made me think ya still had it. Well good luck on project # 2
so ya got another 3gee...
sweet man... can't wait to see this one...
i loved your old one.. your other car was a role modle to mine...
damn that was one sweet ride..
keep it up man...i wanna see this one
R.I.P Spoon Se-i 01/17/04
Soon my friend!
I just got the ok to start stripping my old car. So, major mods will come as of this week!
so what have u done sofar?
Travis
www.cardomain.com/id/dxhatchback
First week....
First few months....
and NOW......
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Sorry for the out of focus pics. Can't afford a $300 digi cam right now!!
I'll list the detaild mods later, i'm on the run!
how come the part between the front and rear door windows look photoshoped?
Originally Posted by lostforawhile
Wow man,... that looks pretty tight... I am in the process of finding a good 3rd gen accord for myself right now... to fight off the bordom of no liscence (2 weeks to go) and no car, I just make fun of my sister for crashing her 89 Sei twice in 2 months!! .... well now that i think about it, its not that funny... oh well..
Originally posted by Chubs87Accord
how come the part between the front and rear door windows look photoshoped?huh?
Trust me, it ain't. Thats a fresh digi pic i took today. I don't know crap about photoshoping, you could ask Mike about that!
Oldschool, I bet you any money that your neighbors kind of laugh at you. They see your crashed car, and on their way out to their own cars they see you modding the same car, the same exact way after you wrecked the first one. haha.
Slap some paint on it and your ready to roll!
Nate.
it looks just like the old one! it must be a pain in the ass to drive a slow ass car after years of VTEC power!
Travis
www.cardomain.com/id/dxhatchback
Your right! The paint are in plans after the swap. Soon my friend!Originally posted by 89AccordNate
Oldschool, I bet you any money that your neighbors kind of laugh at you. They see your crashed car, and on their way out to their own cars they see you modding the same car, the same exact way after you wrecked the first one. haha.
Slap some paint on it and your ready to roll!
Nate.
It's because his VTEC Accord ( :p ) was all white with shaved mouldings and such....He just swapped the white mirrors and door things that you are talking about to the PRETEC Accord (Originally posted by Chubs87Accord
how come the part between the front and rear door windows look photoshoped?) that he has now....
P.S. OSS, fuck the paint and get the B16 in the damn thing!!!
The GSX was killed, I need something new...
My point exactly!Originally posted by 88LXiHB
P.S. OSS, fuck the paint and get the B16 in the damn thing!!!
Getting there again, did you have to replace any of the rims? I am so paranoid about getting in an accident because people do dumb crap all the time (for example some guy almost ran right into my drivers door when i was taking a left onto a side street. He wasnt looking and came very close). Some days if i was only in my other accord i would just wack these people. But i know your accident wasnt because of that......glad to see your making good progress....
Hey OldSchool, you selling those Civic rims? I have some just like that on my car, but they're pretty beat up. Plus they don't have the "H" in the middle. Anyway, are you selling them?
1989 Laurel Blue Accord LX: The daily driver!
2000 Premium White Honda Prelude: The weekend driver!
Girls to junkyard=a damn good price on parts
-=RENAISSANCE=-
Looks Gewd Juan!! How did u manage to save the rims from the crash? Just wondering since u hit a pot hole if I am correct!! Did U have to fix the rim ?? And if u did, how much?? Also are u planning on adding something new!! Meaning something OldSchoolSwap #1 did not have???
-=PROJECT-=-
NOTE: Project-R Swap parts provided by Racing Impulse. Swap was Performed by RacingImpulse & Next Wave Auto Performance.
B-Series Wants You
Hey OSS, ive gotta question. Ok how hard was it to swap the B16A into the car? What did you run in a 1/4? Have you ever raced an Civic Si? If so, did you win? & about how much whould i be looking to spend for the complete setup? Im trying to decide if i want a B16A, B18C (not the GSR motor), or a B20B that already comes with a VTEC. Any info that you can provide me with please do, becuz im trying to figure out if i should just get an all new stock motor or a complete swap.
Plans have changed....The car is gone & im on to a new project....Nissan Maxima & 240sx/S13 Silvia....But the modders of the 3rd Gens still have my props. Not to many other cars take tha drive to do like a 3rd Gen
Posting Permissions
Reply With Quote
Bookmarks